[Elecraft] wrong macro for PF2?

[Cady, Fred]

Hi Ian,


In your macro 5, the SWT27; should be SWT29; to point to macro 6 the next time and in macro 6 the SWT29; should be SWT27;

Then, in CONFIG:MACRO just set PF2 to Macro 5.



Cheers,

Fred KE7X


For all KE7X Elecraft books, see www.ke7x.com<http://www.ke7x.com>


________________________________
From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of glcazzola at alice.it <glcazzola at alice.it>
Sent: Sunday, January 22, 2017 5:13 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] wrong macro for PF2?


I am programming two macros for setting 100W and 65w (for amplifier) on my K3S for storing on PF2.
I setted on macro 5 (amp on): MN019;MP001;MN255;PC065;MN110;SWT27;SWH47;SWT14;I setted on macro 6 (100w): MN019;MP001;MN255;PC100;MN110;SWT29;SWH47;SWT14;
Both work from K3 utility and from K-Pod, then I store them on PF2, in this way:
On the K3S I go to CONFIG:MACRO and press "5"
HOLD the PF1 key until "PF2 SET" appears
Tap the "Menu" keyThen go to CONFIG:MACRO and press "6"
HOLD the PF2 key until "PF2 SET" appears
Tap the "Menu" key
But every time  I push (hold way)  PF2 it set everytime 100W, dont change 65-100 watts every pushing.
It seem that only last storing on PF2 has been saved.
Sure something is wrong , even if same kind of setting on PF1 dor split/unsplit work. Can somebody help me?
I have bought Fred Cady beautiful book on macros programming, and I will study it, but if somebody can give me a fast solution I will be very happy :)
Ian IK4EWX


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fcady at montana.edu