[Elecraft] k-pod data cable

[Jim Brown]

If I were to make up an extension using CAT5/6, I would use one pair for 
PGD, another for PGC, and the other two for VCC5, tying the four returns 
of each pair together and wiring it to Ground. I'm taking it for granted 
that MCLR is really unused.

73, Jim K9YC

On Mon,1/16/2017 10:10 AM, Harry Yingst via Elecraft wrote:
> A little info for those wanting to make longer cables
>
>   As I understand it the Elecraft connector is a Modified MPLAB IDC 2 In-Circut Programming connector
>
> Here are the pin outs as I read them
>    1   Unused    - MCLR, Low to reset CPU
>    2   +5 vDC    - VCC5
>    3   Ground    - VSS
>    4   Data      - PGD
>    5   Clock     - PGC
>    6   +5 vDC    - VCC5
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jim at audiosystemsgroup.com