[Elecraft] Elecraft Digest, Vol 153, Issue 17
Gary Hawkins
gary at hawkins-zhu.com
Thu Jan 12 14:00:56 EST 2017
Hi Tyler,
That will be great.
Gary
On 1/12/2017 9:51 AM, elecraft-request at mailman.qth.net wrote:
> Send Elecraft mailing list submissions to
> elecraft at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/elecraft
> or, via email, send a message with subject or body 'help' to
> elecraft-request at mailman.qth.net
>
> You can reach the person managing the list at
> elecraft-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Elecraft digest..."
>
>
> Today's Topics:
>
> 1. KX3 and setting up MRP40 directions (Schumacher, Paul)
> 2. Re: Mobile Radio Dreams & the KX2 (Joe Moffatt)
> 3. KX1 Build (R&B)
> 4. Re: Elecraft Digest, Vol 153, Issue 16 (Dana Shtun)
> 5. Re: Happy Dance (Ron D'Eau Claire)
> 6. Elecraft-Free Straight Key Night (gliderboy1955)
> 7. Re: Q11 Blown (Dickie M0AUW)
> 8. FS K2/100 (Peter Torry)
> 9. QRP/outdoors/SOTA/KX2 presentation at the Palm Springs
> hamfest, Feb. 4th (Arthur Gunn)
> 10. WSJT-X Problem with K3S (stengrevics)
> 11. Re: Elecraft-Free Straight Key Night (stan levandowski)
> 12. Re: WSJT-X Problem with K3S (Nicklas Johnson)
> 13. Re: WSJT-X Problem with K3S (John Stengrevics)
> 14. Re: WSJT-X Problem with K3S (Nicklas Johnson)
> 15. Re: WSJT-X Problem with K3S (John Stengrevics)
> 16. Re: WSJT-X Problem with K3S (Don Wilhelm)
> 17. Re: WSJT-X Problem with K3S (Nicklas Johnson)
> 18. Re: QRP/outdoors/SOTA/KX2 presentation at the Palm Springs
> hamfest, Feb. 4th (Wayne Burdick)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 12 Jan 2017 02:45:20 +0000
> From: "Schumacher, Paul" <PSchumacher at winona.edu>
> To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
> Subject: [Elecraft] KX3 and setting up MRP40 directions
> Message-ID:
> <BN6PR06MB2817232BF84373C4455EFB0EDD790 at BN6PR06MB2817.namprd06.prod.outlook.com>
>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Does anyone have directions for setting up MRP40 with KX3 and has
>
> had success using it?
>
>
> thanks Paul K0ZYV
>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Thu, 12 Jan 2017 03:12:22 +0000
> From: Joe Moffatt <joe at selectconnect.net>
> To: "Eric Swartz - WA6HHQ, Elecraft" <eric at elecraft.com>,
> "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] Mobile Radio Dreams & the KX2
> Message-ID:
> <C79D3AFB46F730428C54051DD86A135E6889D046 at ORD2MBX05B.mex05.mlsrvr.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Are these the mobile mounts recommended in this thread? The Sidekick... or are there other KX2 specific mounts?
>
> I just bought a KX2/KXPA amp combo.
>
> Yes, it is more expensive than other mobile options, but the better mobile rigs out there have been discontinued, and for new gear, this really isn't that much more expensive overall, especially when I also want to grab and go with my KX2 for travel/backpacking/portable.
>
> Joe
>
> AB5OR
> ________________________________
> From: Elecraft [elecraft-bounces at mailman.qth.net] on behalf of Eric Swartz - WA6HHQ, Elecraft [eric at elecraft.com]
> Sent: Tuesday, December 13, 2016 4:51 PM
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Mobile Radio Dreams & the KX2
>
> Scott from SideKX also has a very nice mobile mount that the KX2 just snaps
> into. It in turn has holes for the very popular AMP mounting solutions.
>
> I'm using this with a KX2 to drive a KXPA100 in my RAV4 (the one Bill, AE6JV -
> the O.P. passed on the road that made him think about mobile op's :-) It fits
> perfectly just below my dashboard in the center console.
>
> See http://www.gemsproducts.com/product/kx2-mount/<redir.aspx?REF=G-pkWTuOZ17c4wtLm98gsePDPCZX8D6_HMTueZuitKcbNXiYmDrUCAFodHRwOi8vd3d3LmdlbXNwcm9kdWN0cy5jb20vcHJvZHVjdC9reDItbW91bnQv>
>
> 73,
>
> Eric WA6HHQ
> /elecraft.com
> ----
>
> /
> On 12/13/2016 11:49 AM, Bill Frantz wrote:
>> A few weeks ago I passed a car with the license WA6HHQ and it got me to
>> thinking: What if Elecraft made a radio specifically designed as a mobile
>> radio? Here are some of my ideas:
>>
>> It would have a UI designed to minimize driver distraction. This UI might draw
>> inspiration from the 5 button AM radios of old, which could tune pre-sets
>> without looking at the radio.
>>
>> It would:
>> Cover 80M-6M with 2M and 70cm being nice additions.
>>
>> Be available with 50-100W maximum output
>>
>> Have a small control head with a separation cable if necessary.
>>
>> Have a "hands free" operation option
>>
>>
>> One intriguing idea would be to use the smartphone interfaces available in
>> some newer cars to provide the entire radio UI in a form that is well
>> integrated into the auto console. Or at least use it as a panadapter display.
>>
>> 73 Bill AE6JV
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft<redir.aspx?REF=LvzQjrX7zzOaZoYsFov23peSmUdt_DgJNh9ijDpONmwbNXiYmDrUCAFodHRwOi8vbWFpbG1hbi5xdGgubmV0L21haWxtYW4vbGlzdGluZm8vZWxlY3JhZnQ.>
> Help: http://mailman.qth.net/mmfaq.htm<redir.aspx?REF=BMM66HZLGIL-2SejX603kHE8kKxSLYiFG297ztSyw7IbNXiYmDrUCAFodHRwOi8vbWFpbG1hbi5xdGgubmV0L21tZmFxLmh0bQ..>
> Post: mailto:Elecraft at mailman.qth.net<redir.aspx?REF=4RQlJx5fiDzNy9Pe37150dYZWhH1UJfRJ_IrKIWkU-MbNXiYmDrUCAFtYWlsdG86RWxlY3JhZnRAbWFpbG1hbi5xdGgubmV0>
>
> This list hosted by: http://www.qsl.net<redir.aspx?REF=BwgP649P_UU4XGD7ONQogiqZML-B3nSYRSGiYmyL070bNXiYmDrUCAFodHRwOi8vd3d3LnFzbC5uZXQ.>
> Please help support this email list: http://www.qsl.net/donate.html<redir.aspx?REF=7uyeiJTFw54p_P8CiwUosMyt4cYuSEbGnXEF46GIr94bNXiYmDrUCAFodHRwOi8vd3d3LnFzbC5uZXQvZG9uYXRlLmh0bWw.>
> Message delivered to joe at selectconnect.net<redir.aspx?REF=P5PRlW6dp3-UIWkV5lcOsKv2GK9PHzh-XnRLKsUHhqEbNXiYmDrUCAFtYWlsdG86am9lQHNlbGVjdGNvbm5lY3QubmV0>
> ________________________________
> Total Control Panel Login<redir.aspx?REF=NbE0YlcntK4xJ5DHVf-0lN0bp1H1cU4E5d4vgrUwyPgbNXiYmDrUCAFodHRwczovL2FzcC5yZWZsZXhpb24ubmV0L2xvZ2luP2RvbWFpbj1zZWxlY3Rjb25uZWN0Lm5ldA..>
>
> To: joe at selectconnect.net<redir.aspx?REF=aWD5IlFIukr6FPsv4-H6RdSuHgnwhCspfVPhHEGdYA0bNXiYmDrUCAFodHRwczovL2FzcC5yZWZsZXhpb24ubmV0L2FkZHJlc3MtcHJvcGVydGllcz9hSUQ9NzUwNjA3NzYxJmRvbWFpbj1zZWxlY3Rjb25uZWN0Lm5ldA..>
> From: elecraft-bounces at mailman.qth.net
>
> Message Score: 1 High (60): Pass
> My Spam Blocking Level: Medium Medium (75): Pass
> Low (90): Pass
> Block<redir.aspx?REF=7cFdAGTQiuH4ocWzg5vGzdu6ul9y9psFvVmOoNe1mCF8lnqYmDrUCAFodHRwczovL2FzcC5yZWZsZXhpb24ubmV0L0Zvb3RlckFjdGlvbj92ZXI9MyZibC1zZW5kZXItYWRkcmVzcz0xJmhJRD0xODU0ODg5ODcwMyZkb21haW49c2VsZWN0Y29ubmVjdC5uZXQ.> this sender / Block<redir.aspx?REF=vcCsiBwCWcQkKkWZSqPdML-Ps4s9ttOqhB1WrcR3vLx8lnqYmDrUCAFodHRwczovL2FzcC5yZWZsZXhpb24ubmV0L0Zvb3RlckFjdGlvbj92ZXI9MyZlbnQ9MSZibC1zZW5kZXItYWRkcmVzcz0xJmhJRD0xODU0ODg5ODcwMyZkb21haW49c2VsZWN0Y29ubmVjdC5uZXQ.> this sender enterprise-wide
> Block<redir.aspx?REF=8UOujB-s9LYTQuX7g-tGR0dn4oLulGYxjnoJDDt9yAF8lnqYmDrUCAFodHRwczovL2FzcC5yZWZsZXhpb24ubmV0L0Zvb3RlckFjdGlvbj92ZXI9MyZibC1zZW5kZXItZG9tYWluPTEmaElEPTE4NTQ4ODk4NzAzJmRvbWFpbj1zZWxlY3Rjb25uZWN0Lm5ldA..> mailman.qth.net / Block<redir.aspx?REF=DYsxjWgSeQviQNoiIQF7evoFlzwqwq0ShRD6FTYtIvd8lnqYmDrUCAFodHRwczovL2FzcC5yZWZsZXhpb24ubmV0L0Zvb3RlckFjdGlvbj92ZXI9MyZlbnQ9MSZibC1zZW5kZXItZG9tYWluPTEmaElEPTE4NTQ4ODk4NzAzJmRvbWFpbj1zZWxlY3Rjb25uZWN0Lm5ldA..> mailman.qth.net enterprise-wide
>
>
> This message was delivered because the content filter score did not exceed your filter level.
>
>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 11 Jan 2017 20:20:17 -0700
> From: "R&B" <kingery713 at gmail.com>
> To: <elecraft at mailman.qth.net>
> Subject: [Elecraft] KX1 Build
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset="us-ascii"
>
> Ron:
>
> Your measurements are very consistent with mine & I have been very pleased
> with my KX1. I built it in 2014. I also fiddled with the toroid turns &
> wasn't able to improve things. My measurements were as follows:
>
>
>
> After completion @14.0 Vdc:
>
> 7.1-Mhz: 2.69 w
>
> 14.1 Mhz: 3.75 w
>
>
>
> After 30-80 Install @14.0 Vdc:
>
> 7.1-Mhz: 1.97 w
>
> 14.1 Mhz: 2.22 w
>
>
>
> After Power Modification @ 14.0 Vdc:
>
> 7.1-Mhz: 3.27 w
>
> 14.1 Mhz: 3.39 w
>
>
>
> I have made a lot of qso's on this radio - I really like it.
>
>
>
> 73,
>
> Rob - AE7AP
>
>
>
>
>
> ------------------------------
>
> Message: 4
> Date: Thu, 12 Jan 2017 03:47:39 +0000
> From: Dana Shtun <ve3dss at hotmail.com>
> To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] Elecraft Digest, Vol 153, Issue 16
> Message-ID:
> <DM5PR11MB17698D016BB6C2EECFEE2B9D8B790 at DM5PR11MB1769.namprd11.prod.outlook.com>
>
> Content-Type: text/plain; charset="us-ascii"
>
>
> On Jan 11, 2017, at 20:43, elecraft-request at mailman.qth.net wrote:
>
> Send Elecraft mailing list submissions to
> elecraft at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/elecraft
> or, via email, send a message with subject or body 'help' to
> elecraft-request at mailman.qth.net
>
> You can reach the person managing the list at
> elecraft-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Elecraft digest..."
>
>
> Today's Topics:
>
> 1. K-POD CABLE LENGTH (NOEL POULIN)
> 2. KIO3B RTTY AFSK problem with Transmit (Dan)
> 3. Re: KPA-500 Running hot on 20m (Edward R Cole)
> 4. Re: KIO3B RTTY AFSK problem with Transmit (Don Wilhelm)
> 5. Re: KIO3B RTTY AFSK problem with Transmit (Bill Frantz)
> 6. FOR SALE: KX3 and PX3 (Mark Tellez)
> 7. QRP/outdoors/SOTA/KX2 presentation at the Palm Springs
> hamfest, Feb. 4th (Wayne Burdick)
> 8. NPOTA LOCATION (Nr4c)
> 9. SDRplay and Win4K3 (Doug Ellmore)
> 10. OT: a short presentation to a group of primary school
> children about radio (Johnny Siu)
> 11. OT (sort of) -- went from WSJT-X vs 1.6 to vs 1.7 (have a
> KX3) and having problems... (James Rodenkirch)
> 12. Tandem operation of KPA and ACOM 1500 (Jim Miller)
> 13. Re: Tandem operation of KPA and ACOM 1500 (KV5J)
> 14. KAT500 Utility problem (George Kidder)
> 15. Re: KAT500 Utility problem (Harry Yingst)
> 16. Re: KANT3A (HankP)
> 17. Re: KANT3A (Jim Miller)
> 18. Re: KANT3A (KV5J)
> 19. Thanks to Elecraft support (Carl Yaffey1)
> 20. Re: Thanks to Elecraft support (briancom)
> 21. Re: KAT500 Utility problem (George Kidder)
> 22. Re: KANT3A (Ron D'Eau Claire)
> 23. Re: Tandem operation of KPA and ACOM 1500 (Rick Tavan)
> 24. Age of K2? (ac5p at sbcglobal.net)
> 25. Re: Age of K2? (Fred Jensen)
> 26. Happy Dance (Stewart)
> 27. Re: Happy Dance (Fred Jensen)
> 28. Re: Age of K2? (Don Wilhelm)
> 29. Re: Happy Dance (Jim Cox)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 10 Jan 2017 17:07:48 -0500
> From: NOEL POULIN <ve2fww at globetrotter.net>
> To: Elecraft at mailman.qth.net
> Subject: [Elecraft] K-POD CABLE LENGTH
> Message-ID: <71e0bbfe-868e-a834-9bed-ed6e15b01960 at globetrotter.net>
> Content-Type: text/plain; CHARSET=US-ASCII; format=flowed
>
> Hello Everyone,
> I would like to know what is the maximum length of cable on a K-POD, we
> can use.
> The reason is that I want to use it from another room in my house...of
> course the K3S is in one room, and sometimes I want to listen on the
> radio...remote...with Ham Radio Deluxe.....in another room.....and I
> would like to be able to use my K-Pod ...
>
> Thanks
> Noel
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 10 Jan 2017 17:16:16 -0500
> From: "Dan" <w8car at bex.net>
> To: <elecraft at mailman.qth.net>
> Subject: [Elecraft] KIO3B RTTY AFSK problem with Transmit
> Message-ID: <20F08424B9E54CB58ED45CF887679DD3 at TurdFerguson>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Did RU this past weekend and could not get KIO3B to XMIT-Receive is fine using MMTTY and N1MM. Ended up using my Signal Link for XMIT.
> Here is what I know.
> NO line in or out connections on back of radio (per earlier email I saw)
> Radio control, frequency, etc. work fine-just updated firmware
> USB Codec shows as USB Codec 3 on computer. I can see AFSK produced in transmit on MMTTY screen and the silly meter in the sound control window. but no audio reaches radio
> DATA Mode is set for AFSK A (like I have always used it for SIgnal Link)
> Even if I manually turn XMIT on no audio IN. (I am using VOX and not PTT) Do I need to enable PTT?
>
> I have tried switching MIKE to LINE IN to no avail.
>
> What am I missing? Any help here would be appreciated.
> Dan W8CAR
>
> ------------------------------
>
> Message: 3
> Date: Tue, 10 Jan 2017 13:19:46 -0900
> From: Edward R Cole <kl7uw at acsalaska.net>
> To: Elecraft Reflector <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] KPA-500 Running hot on 20m
> Message-ID: <201701102219.v0AMJnUJ000866 at mail47c28.carrierzone.com>
> Content-Type: text/plain; charset="us-ascii"; format=flowed
>
> OT: but I am going to add a couple cpu fans to the heat sink of my
> KXPA100 which will be installed under the backseat of my truck. That
> will ensure a little more cooling. The seat sets down on top of the
> fins so the fans will be positioned to feed from one end. The
> enclosure will be drilled with multiple 3/4 inch holes for airflow.
>
> I will only run SSB so that is low duty-cycle. The internal overtemp
> protect will engage if it gets too hot.
>
> 73, Ed - KL7UW
> http://www.kl7uw.com
> Dubus-NA Business mail:
> dubususa at gmail.com
>
>
>
> ------------------------------
>
> Message: 4
> Date: Tue, 10 Jan 2017 17:45:04 -0500
> From: Don Wilhelm <donwilh at embarqmail.com>
> To: Dan <w8car at bex.net>, elecraft at mailman.qth.net
> Subject: Re: [Elecraft] KIO3B RTTY AFSK problem with Transmit
> Message-ID: <ac3b4d5b-84e4-ddad-3abf-4fd0d7765619 at embarqmail.com>
> Content-Type: text/plain; charset=windows-1252; format=flowed
>
> Dan,
>
> It sounds like you are doing things right.
> What is the Speaker slider on the computer set to? Open the playback
> controls - normally set it to about 75%. The "meter" in the computer
> soundcard display will not tell you the whole story. Go to the Playback
> Controls to see the slider (Windows - Mac or Linux may be different).
>
> Make sure there is nothing plugged into LINE IN (it overrides the Codec
> line in). You may want to insert a plug into the LINE IN jack and
> quickly remove it just to make certain the contacts in the jack close
> properly.
>
> You must set the MIC menu entry to LINE.
>
> Set the audio level correctly (you can do that in TX TEST or connected
> to a dummy load so you do not transmit RF). Tell your software
> application to "transmit", then adjust the "MIC" gain (actually LINE if
> you have set the menu correctly) until you have 4 bars solid with the
> 5th bar flashing.
>
> If you cannot achieve that audio level by manipulating to Speaker slider
> on the computer and the MIC Gain on the K3S, something is awry - contact
> K3support for additional assistance.
>
> 73,
> Don W3FPR
>
> On 1/10/2017 5:16 PM, Dan wrote:
>> Did RU this past weekend and could not get KIO3B to XMIT-Receive is fine using MMTTY and N1MM. Ended up using my Signal Link for XMIT.
>> Here is what I know.
>> NO line in or out connections on back of radio (per earlier email I saw)
>> Radio control, frequency, etc. work fine-just updated firmware
>> USB Codec shows as USB Codec 3 on computer. I can see AFSK produced in transmit on MMTTY screen and the silly meter in the sound control window. but no audio reaches radio
>> DATA Mode is set for AFSK A (like I have always used it for SIgnal Link)
>> Even if I manually turn XMIT on no audio IN. (I am using VOX and not PTT) Do I need to enable PTT?
>>
>> I have tried switching MIKE to LINE IN to no avail.
>>
>
> ------------------------------
>
> Message: 5
> Date: Tue, 10 Jan 2017 14:50:11 -0800
> From: Bill Frantz <frantz at pwpconsult.com>
> To: Dan <w8car at bex.net>
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] KIO3B RTTY AFSK problem with Transmit
> Message-ID:
> <r470Ps-10122i-B8081AC966EB440DBA9B8460C84548C1 at Williams-MacBook-Pro.local>
>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> Use AFSK A mode for RTTY. DATR A can also be made to work, but
> my experience with AFSK A is much better. FSK D does not use the
> sound card for transmission.
>
> Make sure your computer is producing enough output drive. On my
> Mac I need to go to System Preferences -> Sound and raise the
> output volume all the way.
>
> Make sure your application is addressing the correct USB device.
> (Don't ask how I know.)
>
> Input from the radio should work but might be low in volume.
> Some of us set Config: LIN OUT to about 40.
>
> 73 Bill AE6JV
>
> On 1/10/17 at 2:16 PM, w8car at bex.net (Dan) wrote:
>
>> Did RU this past weekend and could not get KIO3B to
>> XMIT-Receive is fine using MMTTY and N1MM. Ended up using my
>> Signal Link for XMIT.
>> Here is what I know.
>> NO line in or out connections on back of radio (per earlier email I saw)
>> Radio control, frequency, etc. work fine-just updated firmware
>> USB Codec shows as USB Codec 3 on computer. I can see AFSK
>> produced in transmit on MMTTY screen and the silly meter in the
>> sound control window. but no audio reaches radio
>> DATA Mode is set for AFSK A (like I have always used it for SIgnal Link)
>> Even if I manually turn XMIT on no audio IN. (I am using VOX and not PTT) Do I need to enable PTT?
>>
>> I have tried switching MIKE to LINE IN to no avail.
> -----------------------------------------------------------------------
> Bill Frantz | Security is like Government | Periwinkle
> (408)356-8506 | services. The market doesn't | 16345
> Englewood Ave
> www.pwpconsult.com | want to pay for them. | Los Gatos,
> CA 95032
>
>
>
> ------------------------------
>
> Message: 6
> Date: Tue, 10 Jan 2017 17:11:55 -0600
> From: Mark Tellez <aar6ea at gmail.com>
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] FOR SALE: KX3 and PX3
> Message-ID:
> <CALyK5YGNicifJrBxC65zTY1TDMEFT2A_4aO1N6hQ808WiG3e7w at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> Hello everyone.
>
> It is with reluctance I have decided to sell my KX3 and PX3.
>
> Both are in like-new condition and both were factory built.
>
> I will sell them together or separately.
>
> I have a 100% 500+ feedback on eBay as both a seller and a purchaser.
>
> Here is what I am selling:
>
> Included with KX3:
>
> 1) Elecraft KX3 Transceiver (factory built)
>
> 2) Built in KXAT3 antenna tuner
>
> 3) Internal NiMH Charger for KX3
>
> 4) KXFL3 Dual-Passband Roofing Filter
>
> 5) MH3 Hand Microphone
>
> 6) Side KX protective handles (see note below)
>
> *7) *PAE-Kx31 basic Elecraft? KX3 *heatsink*
>
> 8) Kx33 *Low-RFI *AC Power Supply for HF Transcievers
>
> 9) Nifty Accessories Desk Stands KX3
>
> 10) Nifty Accessories Quick Reference guide
>
> 11) Cables
>
> 12) Fred Cady spiral bound (6x9) excellent reference book.
>
> 13) Laminated reference material and manuals.
>
> 14) Custom color coded cables for quick connect and disconnect
>
> 15) MARS and high power SW modifications installed but removable.
>
>
> Included with the PX3:
>
>
> 1) Elecraft PX3 Panadaptor (factory built)
>
> 2) Side KX protective handles (see note below)
>
> 3) Nifty Accessories Desk Stands PX3
>
> 4) Cables
>
>
> Asking $1430 for the KX3 $550 for the PX3 or $1890 for both
>
> Please contact me at AAR6EA at gmail.com if interested.
>
>
> Thanks everyone.
>
>
> Mark
>
>
> *Note:* I will send the Lexan cover separately (a few weeks after the main
> purchase. I have the cover in storage and need to locate it.
>
>
> ------------------------------
>
> Message: 7
> Date: Tue, 10 Jan 2017 17:12:54 -0800
> From: Wayne Burdick <n6kr at elecraft.com>
> To: Elecraft Reflector <elecraft at mailman.qth.net>,
> "KX3 at yahoogroups.com" <KX3 at yahoogroups.com>
> Cc: QRP-L <qrp-l at mailman.qth.net>
> Subject: [Elecraft] QRP/outdoors/SOTA/KX2 presentation at the Palm
> Springs hamfest, Feb. 4th
> Message-ID: <4206FEEC-CD29-4BE7-A908-DB1D042D264B at elecraft.com>
> Content-Type: text/plain; charset=us-ascii
>
> Hi all,
>
> Don Minkoff, NK6A, will be giving a talk on outdoor QRP operation and Summits on the Air (SOTA) at the Palm Springs Hamfest on Feb. 4th.
>
> I'll be joining Don to describe some related optimizations embodied in the Elecraft KX2.
>
> See you there!
>
> 73,
> Wayne
> N6KR
>
>
>
> ------------------------------
>
> Message: 8
> Date: Tue, 10 Jan 2017 20:47:55 -0500
> From: Nr4c <nr4c at widomaker.com>
> To: PVRC <pvrc at mailman.qth.net>, elecraft <elecraft at mailman.qth.net>,
> dxlab at yahoogroups.com
> Subject: [Elecraft] NPOTA LOCATION
> Message-ID: <0455EBEF-9627-4867-9912-F7F1DEF1FF46 at widomaker.com>
> Content-Type: text/plain; charset=us-ascii
>
> Guys, it's time to reset your LoTW Location in your logging program. I and others are getting NPOTA credits for parks during the ARRL RTTY RU contest last weekend. They don't count, but your location info may be wrong when uploaded to LoTW.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
>
>
> ------------------------------
>
> Message: 9
> Date: Tue, 10 Jan 2017 22:21:23 -0500
> From: Doug Ellmore <doug at ellmore.net>
> To: Elecraft Reflector Reflector <elecraft at mailman.qth.net>
> Subject: [Elecraft] SDRplay and Win4K3
> Message-ID:
> <CANAn7wy7J9nOPU3HmEq0vxBYePkMTT7aW4gzZJnwAdwaq7rDAA at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> I've been testing the latest version of SDRplay RSP2 (
> http://www.sdrplay.com/rsp2/.
>
> I've been using the original SDRplay for a few months now and like the 2mhz
> spectrum display using my K3's IF out and Win4K3suite.
>
> Win4K3 (http://va2fsq.com/ ) has added support for the new release SDRPlay
> RSP2 and likely will be doing additional enhancements to take advantage of
> the SDRPlay RSP2 expanded device features.
>
> It is really nice in that you can have 2mhz of spectrum in the panadapter
> display in Win4K3 Suite.
>
> That said, CWSkimmer does not yet support the SDRplay, but there are some
> doing some work arounds with virtual audio cables (VAC). So, using a T
> connector, I also use the IF Out with my LP-Pan2 and Steinberg UR22
> soundcard with CWSkimmer.
>
> The noise floor of the SDRPlay is really good and with adjustments, I am
> able to see very weak signals coming out of the K3 IF.
>
> 73
>
> Doug NA1DX
>
More information about the Elecraft
mailing list