[Elecraft] R: Re: wrong macro for PF2?

[glcazzola at alice.it]

Thank Fred, great!Just tried your instructions, and those solved the problem! Obviously.... :)Now PF2 work well, changing 65-100W.
The problem is that I hadnt well understood... and really now need to read your (big) book.
At this moment I have saved six macros for split/unsplit, THR15/THR07, AMP ON 65W-AMP OFF 100W, plus macros for the K-Pad for switching K3S keys PF1 (split/unsplit), APF ON/OFF,  switching XFIL, pressing SPOT, PF2 (65W/100W).Again I have space for 4 other  macros, not more.
Really I need suggestions from your book to optimize the 8 K3S memories on M1 up to M8 and PF1 - PF2 and optimize  the full 16 memories on K-Pad.I have a P3 but without SVGA module, so here I havent the other P3 memories.
Another question for  you: how you set your NB levels, if agc and dsp-agc? On my K3S NB seem to work barely only at higher if agc setting.
Many thanks Fred,Ian IK4EWX





----Messaggio originale----

Da: fcady at montana.edu

Data: 22-gen-2017 17.22

A: "elecraft at mailman.qth.net"<elecraft at mailman.qth.net>, "glcazzola at alice.it"<glcazzola at alice.it>

Ogg: Re: [Elecraft] wrong macro for PF2?





-->



Hi Ian,



In your macro 5, the SWT27; should be SWT29; to point to macro 6 the next time and in macro 6 the SWT29; should be SWT27;

Then, in CONFIG:MACRO just set PF2 to Macro 5.







Cheers,

Fred KE7X





For all KE7X Elecraft books, see 
www.ke7x.com







From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of glcazzola at alice.it <glcazzola at alice.it>

Sent: Sunday, January 22, 2017 5:13 AM

To: elecraft at mailman.qth.net

Subject: [Elecraft] wrong macro for PF2?
 





I am programming two macros for setting 100W and 65w (for amplifier) on my K3S for storing on PF2.

I setted on macro 5 (amp on): MN019;MP001;MN255;PC065;MN110;SWT27;SWH47;SWT14;I setted on macro 6 (100w): MN019;MP001;MN255;PC100;MN110;SWT29;SWH47;SWT14;

Both work from K3 utility and from K-Pod, then I store them on PF2, in this way:

On the K3S I go to CONFIG:MACRO and press "5"

HOLD the PF1 key until "PF2 SET" appears

Tap the "Menu" keyThen go to CONFIG:MACRO and press "6"

HOLD the PF2 key until "PF2 SET" appears

Tap the "Menu" key

But every time  I push (hold way)  PF2 it set everytime 100W, dont change 65-100 watts every pushing.

It seem that only last storing on PF2 has been saved.

Sure something is wrong , even if same kind of setting on PF1 dor split/unsplit work. Can somebody help me?

I have bought Fred Cady beautiful book on macros programming, and I will study it, but if somebody can give me a fast solution I will be very happy :)

Ian IK4EWX





______________________________________________________________

Elecraft mailing list

Home: http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:Elecraft at mailman.qth.net



This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html

Message delivered to fcady at montana.edu