[Elecraft] WSJT-X Problem with K3S

[John Stengrevics]

Hi Nick,

Thanks for the suggestion!  I turned the power down to 2 watts and the problem went away.

What’s the solution, ferrites on the USB cable?

John
WA1EAZ

> On Jan 12, 2017, at 10:28 AM, Nicklas Johnson <nick at n6ol.us> wrote:
> 
> When I've had this happen with other rigs in the past, it's been because of RF leaking back into the shack and causing CAT commands to fail (because of common mode current on the serial line).
> 
> If you reduce power to something quite small, like 1-2 W, does it stop happening?
> 
>    Nick
> 
> On 12 January 2017 at 07:03, stengrevics <jstengrevics at comcast.net <mailto:jstengrevics at comcast.net>> wrote:
> When I transmit (using MSK144), the transmit stays on after the transmission
> is complete causing spillover into the next sequence.  This happens
> randomly.
> 
> Anybody have any suggestions as to how to fix this?
> 
> Thanks,
> 
> John
> WA1EAZ
> 
> 
> 
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/WSJT-X-Problem-with-K3S-tp7625670.html <http://elecraft.365791.n2.nabble.com/WSJT-X-Problem-with-K3S-tp7625670.html>
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft <http://mailman.qth.net/mailman/listinfo/elecraft>
> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm>
> Post: mailto:Elecraft at mailman.qth.net <mailto:Elecraft at mailman.qth.net>
> 
> This list hosted by: http://www.qsl.net <http://www.qsl.net/>
> Please help support this email list: http://www.qsl.net/donate.html <http://www.qsl.net/donate.html>
> Message delivered to nick at n6ol.us <mailto:nick at n6ol.us>
> 
> 
> 
> -- 
> N6OL
> Saying something doesn't make it true.  Belief in something doesn't make it real. And if you have to lie to support a position, that position is not worth supporting.