[Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

[Ron D'Eau Claire]

You can be sure if a post does not belong here Eric, the list moderator,
will say so. 

In his previous posts, Eric has stressed that *anything* of interest in
setting up and operating a Ham station or in promoting Amateur Radio is okay
provided the posters use discretion in the number of posts on a given
subject. 

73, Ron AC7AC

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bill
Johnson
Sent: Friday, January 27, 2017 4:48 PM
To: 'Raymond Benny'; 'Elecraft Reflector'
Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new
in box connectors FOR SALE

Ray,  Thank you.  I mistakenly posted on the reflector in response to
another thread then realized it was off topic, corrected it without
thinking.  I will post this as it is not conforming with list rules and I do
apologize.  MEA COPA as my wife with prompt me.  

73,
Bill
K9YEQ

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
Raymond Benny
Sent: Friday, January 27, 2017 2:10 PM
To: TowerTalk at contesting.com
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new
in box connectors FOR SALE

Bill,

I will be buying a 250 - 300 ft spool of 1/2" hardline from a local
salvage/surplus store for $100. Guess you would consider it NOS. The wooden
spools themselves are in poor shape. Not certain that it is Andrews coax, if
not, its a very good copy.

Like John says, you buy it when you find a good bargain. Same with
connectors; at swap meets, used connectors are typically no more that $5
each. I guess if someone needs some hardline now, and could pick it up
locally, yours would be a fair price.

You can also often find 7/8", 100 - 130 ft  hardline pieces  for about $1 a
foot. Sometimes they may have a connector on one end included.

BTW, I agree with others, this is not an subject Elecraft and does not
belong here. I'm sending this email to the "TowerTalk" reflector where it
really should be.

73,

Ray,
N6VR

On Fri, Jan 27, 2017 at 10:32 AM, john at kk9a.com <john at kk9a.com> wrote:

> Once I had an item for sale (on a real swap site) and someone pointed 
> out that my pricing was incorrect and too high. After some research I 
> realize that he was correct I was grateful for the information. Since 
> then I have notified a few people selling items when their pricing is 
> way out of line and most became offended, so I quit doing this. Often 
> new items were selling for the same price or less.
>
> FWIW, I have purchased a lot of new FSJ4 connectors for ~$15 and FSJ4 
> for ~$1/ft in the surplus market. However you have to buy it when you 
> see it as it is not always available and you have take whatever length 
> the coil happens to be.
>
> John KK9A
>
> from: Bill Johnson k9yeq
>
> Jim,  Thanks.  Can you buy this Heliax now for $1 per foot? This the 
> stuff you mention.  The connectors are Andrews as well and are kits to
install.
> I
> don't remember what I paid but may have been about what you did.  The 
> connectors were another story.  I lucked out with them.  They appear 
> to be lower in price.  I will match whatever someone comes up with and 
> can give me a link to verify.  This is excess to my needs and all I 
> want is fair price.
> This would only be useful for UHF and higher unless you are talking 
> max power and low loss.
>
> 73,
> Bill
> K9YEQ
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf 
> Of Jim Brown
> Sent: Thursday, January 26, 2017 5:18 PM
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 
> F4PNM new in box connectors FOR SALE
>
> FWIW -- I've bought a lot of used hard line, and I've never paid more 
> than a buck a foot for cut lengths of 1/2-in hard line in good or even 
> new condition. About five years ago, I paid $100 for 100 ft of LDF4-50 
> (1/2-in
> Andrew) brand new. Don't remember if it had connectors on it or if I 
> bought them separately.
>
> 73, Jim K9YC
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to 
> rayn6vr at gmail.com
>



--
Ray,
N6VR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to k9yeq at live.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ron at elecraft.com