[Elecraft] Strange behavior on K3 system when transmitting

[Nr4c]

Yes. Read the manual on setting levels for digital modes in the manual. Forget anything you knew before. 

Sent from my iPhone
...nr4c. bill


> On Jan 17, 2017, at 7:56 PM, Jerry <W1ie at jetbroadband.com> wrote:
> 
> Hello,
> 
> 
> 
> I am using my K3, KAT500 and KPA500 in an MARS environment and I am having
> this problem. We use the M110A data mode to transfer messages between
> stations  - sort of like FLdigi only the mode is not legal on amateur
> frequencies. 
> 
> 
> 
> When I use the M110A (Signalink is the interface and USB) I have noticed
> that the output in the KAT500 slowly builds up as the transmission
> continues. It is really noticeable when I have the amp engaged. The power
> output seems to start at some low level (no lights) to full output in about
> five seconds of continuous transmitting (SSB). I originally suspected that
> it might have something to do with the KAT500 functionality , but I don't
> think so now because the condition existed even when I put the tuner into
> bypass.
> 
> 
> 
> Any ideas?
> 
> 
> 
> Jerry, W1IE
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com