[Elecraft] KAT-500 Remote software display

[ab2tc]

Hi,

Ecactly. So yo can use the usual formula for computing VSWR from forward and
reflected voltages. In this nomenclature:

VSWR = (VFWD + VRFL) / (VFWD - VRFL)

In your case : VSWR = (675 + 50) / (675 - 50) = 1.16

Perfect to go!

AB2TC - Knut


Lynn W. Taylor, WB6UUT wrote
> On 1/23/2017 10:20 AM, Don Wilhelm wrote:
>> Those values are used by the firmware to compute the SWR.  I do not 
>> know the conversion factors (and don't really care since the firmware 
>> does the computation). 
> If you're calculating SWR, you don't need to convert them before you do 
> the calculation -- as long as the units are the same.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:

> Elecraft at .qth

> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to 

> lists+1215531472858-365791 at .nabble


Lynn W. Taylor, WB6UUT wrote
> On 1/23/2017 10:20 AM, Don Wilhelm wrote:
>> Those values are used by the firmware to compute the SWR.  I do not 
>> know the conversion factors (and don't really care since the firmware 
>> does the computation). 
> If you're calculating SWR, you don't need to convert them before you do 
> the calculation -- as long as the units are the same.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:

> Elecraft at .qth

> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to 

> lists+1215531472858-365791 at .nabble





--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-names-on-ANT1-and-ANT2-tp7626015p7626058.html
Sent from the Elecraft mailing list archive at Nabble.com.