[Elecraft] K3S Set-up for WSJT-X

[Don Wilhelm]

John,

I don't know the Mac, but it should be similar to Windows.
Go to the Mac equivalent of Device Manager, and unplug the USB cable - 
see which "COM Port" goes away.
Then plug the USB cable back in and observe which COM port is added.
Tell WSJT-X which COM port it should use.

No additional driver should be required unless the COM port shows an error.

73,
Don W3FPR

On 1/5/2017 7:48 PM, stengrevics wrote:
> Two very basic questions as I am just getting started:
>
> 1.  How do I determine the COM number or Serial Port Number to enter in the
> Radio Tab? (I am using a Mac)
>
> 2.  I only want to use the computer to operate WSJT-X, no need to control
> anything else.  Do I need to download a driver of some kind?
>
> Thanks,
>
> John
> WA1EAZ
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3S-Set-up-for-WSJT-X-tp7625483.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>