[Elecraft] More KX2 recieve questions

[David Gilbert]

What are you doing with your RF gain set to zero??

Dave   AB7E



On 1/18/2017 9:23 PM, Paul Smith wrote:
> I called the 4SQRP net tonight on 3564. I had my KX2 for a transmitter and my old tribander for receive. Here is what things are set at.
>
> As I was instructed earlier the pre amp was on although the word pre on the screen went off 4 times during the net and the button took a couple taps to get the pre back on the screen. Is this normal?
>
> The BW is at 2.80
>
> RF gain is 0
>
> NR is off
>
> the APF is off when the button is held a narrow filter kicks in.
>
> I am ocnfused what to do and or to look for. I could hear checkins on my Tribander and not a peep heard on the KX2
>
> The antennas as before were 102 ft doublet and a zepp
>
> Any ideas what to check next?
>
> Thanks
>
> de PAul N0NBD
>
>
> Sent from Outlook<http://aka.ms/weboutlook>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to xdavid at cis-broadband.com
>