[Elecraft] P3 TX Monitor with Two Sensors?

[Vic Rosenthal]

I recall that there was a minor modification that was needed to use a W2 sensor with the P3. I'm not sure if it still is; maybe it has been incorporated in new sensors. 

Vic 4X6GP

> On 13 Jan 2017, at 04:33, Jean-François Ménard <jf.va2ss at icloud.com> wrote:
> 
> Antenna 1 and/or Antenna 2.... on the K3S.  Like the W2.... 2 ports.  
> 
> 73 de Jeff | VA2SS 
> 
> 
> Jeff | VA2SS
> Jean-François Ménard
> 
> E-Mail    jean-francois.menard at va2ss.com
> Blog       www.VA2SS.com
> 
> Message envoyé à partir de mon appareil mobile.
> Message sent from my portable device.
> 
> 
>> Le 12 janv. 2017 à 21:31, Nr4c <nr4c at widomaker.com> a écrit :
>> 
>> Why do you need two sensors?
>> 
>> Sent from my iPhone
>> ...nr4c. bill
>> 
>> 
>>> On Jan 12, 2017, at 8:54 PM, Harry Yingst via Elecraft <elecraft at mailman.qth.net> wrote:
>>> 
>>> I'm thinking an electrical switch (relay, Quad bilateral switch etc)
>>> Then using DIGOUT1 to to toggle the switch between the sensors
>>> 
>>> 
>>>    From: Jean-François Ménard <jf.va2ss at icloud.com>
>>> To: Elecraft Mailing List <elecraft at mailman.qth.net> 
>>> Sent: Thursday, January 12, 2017 8:28 PM
>>> Subject: [Elecraft] P3 TX Monitor with Two Sensors?
>>> 
>>> I just wondering the same thing here…. I ordered today only the hardware needed for the P3…. I already have 2 couplers that I am using with my W2.
>>> 
>>> FYI, if interested….
>>> 
>>> Qty Elecraft pn.          Description
>>> (1) E850387              TX Mon PCB $41.44
>>> (4) E700005              4-40x1/4 inch pan head screws $0.15 each, $0.60 total
>>> (4) E700003            #4 lock washers $0.15 each, $0.60 total
>>> (2) E700060            4-40x5/8 inch hex standoffs $0.66 each, $1.32 total
>>> 
>>> The final total is $43.96 + Shipping
>>> 
>>> 
>>> I hope there will be a way to do something…. Hi Hiiiiiiiiii ‼️🎉 
>>> 
>>> Best 73 de Jeff | VA2SS 
>>>