[Elecraft] K3s meter

[Ron D'Eau Claire]

Richard, the K3 and K3S normally indicate received signal strength in
receive mode, and show the SWR and Power Output in transmit. You can switch
between that an Compression/ALC display by holding the METER switch. Is it
possible you accidentally switched from the normal SWR/Power Output display
to Compression/ALC? 

73, Ron AC7AC

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
RichardG3ZIY
Sent: Saturday, January 7, 2017 7:52 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3s meter

It occurred to me that on transmit the S meter is somewhat redundant. A
suggestion for the next firmware update is that the S meter change to power
output when on transmit.

I am aware that there is a setting to choose RF power or CMP/ALC, but I
would like to be able to monitor CMP and ALC and RF power when in transmit
mode, which I don't think is currently possible... unless I've missed some
setting somewhere on the rig.

73,

Richard, G3ZIY.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to ron at cobi.biz