April 2010 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Apr 1 00:07:14 EDT 2010
Ending: Fri Apr 30 23:54:33 EDT 2010
Messages: 1609

• [Elecraft] k2 assembly other question   David Woolley (E.L)
• [Elecraft] k2 assembly question   David Woolley (E.L)
• [Elecraft] K3 KXV3-RXA Mod   Evert Bakker (PA2KW)
• [Elecraft] How to pronounce the "/"?   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] time to order your P3 >>>>   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] time to order your P3, design details?   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] KPA500   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] News from Visalia! (:-))   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] News from Visalia! (:-))   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] News from Visalia! (:-))   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] more KPA500 photos was Re: News from Visalia! (:-))   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] News from Visalia! (:-))   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] News from Visalia! (:-))   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] KPA500 active devices!!   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] Re： News from Visalia! (:-))   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] News from Visalia! (:-))   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] KPA500   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] News from Visalia!   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] KPA500   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] Good photos of KPA500   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] : Re: News from Visalia! (:-))   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] External Power Supply for the KPA-500   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] RS232 connectivity P3/KPA500   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] N0SS' KPAIO3 Puller - Updated   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] OT: but I think you'll all appreciate this.   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] How to use external ALC with the K3   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] K3 power output on SSB   -.-. --.-N3TU -.-. --.-
• [Elecraft] K3 Keying Up For A Split Second When Power Button Is Pushed   -.-. --.-N3TU -.-. --.-
• [Elecraft] Digital Recorder Funcion Question   -.-. --.-N3TU -.-. --.-
• [Elecraft] Digital Recorder Memory   -.-. --.-N3TU -.-. --.-
• [Elecraft] K3 birdies   -.-. --.-N3TU -.-. --.-
• [Elecraft] Why Not Remove the Birdies Through a Firmware Update   -.-. --.-N3TU -.-. --.-
• [Elecraft] Ten Tec never sounded so good!   -.-. --.-N3TU -.-. --.-
• [Elecraft] Beware, Make Sure Your Amp Is In Standby If You Turn On the K3   -.-. --.-N3TU -.-. --.-
• [Elecraft] Why Not Remove the Birdies Through a Firmware Update   -.-. --.-N3TU -.-. --.-
• [Elecraft] K3 birdies   -.-. --.-N3TU -.-. --.-
• [Elecraft] RS-232 connections   2Cents
• [Elecraft] K3: Driving Data Modes Using Dell Dimension 8400   2Cents
• [Elecraft] KPA500 active devices!!   AD6XY
• [Elecraft] Electret microphone wiring   Ramiro Aceves
• [Elecraft] Electret microphone wiring   Ramiro Aceves
• [Elecraft] Electret microphone wiring   Ramiro Aceves
• [Elecraft] Strange problem last night in my K3   Ramiro Aceves
• [Elecraft] Electret microphone wiring   Ramiro Aceves
• [Elecraft] Strange problem last night in my K3   Ramiro Aceves
• [Elecraft] Remotable external tuner   Ken Alexander
• [Elecraft] Remotable external tuner   Ken Alexander
• [Elecraft] K3 RX FAULT   Robert Allbright
• [Elecraft] K3 Cooling   Brian Alsop
• [Elecraft] K3/LPBRIDGE/FLDIGI   Brian Alsop
• [Elecraft] Using "Buddi Pole" Deluxe Antenna with K3   Brian Alsop
• [Elecraft] RTTY and best IMD, cooling, etc   Brian Alsop
• [Elecraft] KPA500 active devices!!   Brian Alsop
• [Elecraft] Beware, Make Sure Your Amp Is In Standby If You Turn On the K3   Brian Alsop
• [Elecraft] K3 Power Creep   Dan Atchison
• [Elecraft] K3 Power Creep   Dan Atchison
• [Elecraft] Older Serial # K3   Fred Atchley
• [Elecraft] 2.7 vs. 2.8 vs. 1.8 & 2.1   Fred Atchley
• [Elecraft] ERR TXG problem   Fred Atchley
• [Elecraft] International Shipping Charges!!??!!   Fred Atchley
• [Elecraft] [K3] Ferrite beads on TMP cables   Mark Bayern
• [Elecraft] Woohoo, I can start!   Mark Bayern
• [Elecraft] power   Mark Bayern
• [Elecraft] KPA500   Mark Bayern
• [Elecraft] Seems to be confusion!   Mark Bayern
• [Elecraft] International Shipping Charges !!??!!   Mark Bayern
• [Elecraft] News from Visalia! (:-))   Bruce Beford
• [Elecraft] News from Visalia! (:-))   Bruce Beford
• [Elecraft] How to use external ALC with the K3   Bruce Beford
• [Elecraft] SUB Rcv'r - 'USE AUX' message   Bruce Beford
• [Elecraft] News from Visalia! (:-))   Claude Du Berger
• [Elecraft] Seems to be confusion!   Claude Du Berger
• [Elecraft] CW/CW-REV config option   Claude Du Berger
• [Elecraft] K3 KXV3A without Xverters, sub receiver or P3   Alan Bloom
• [Elecraft] Testing anti-static mats - found one that works   Alan Bloom
• [Elecraft] Prolific drivers and Mac OS   Alan Bloom
• [Elecraft] KPA500   Alan Bloom
• [Elecraft] P3 color selection (was Re: time to order your P3, design details?)   Alan Bloom
• [Elecraft] P3 color selection (was Re: time to order your P3, design details?)   Alan Bloom
• [Elecraft] K3 and Expert 1K-FA   Alan Bloom
• [Elecraft] k2 pll and ref osc issues n0xdb   Bob
• [Elecraft] KX1 Opinions PLEASE   Bob
• [Elecraft] Usefulness of the the list   Bob
• [Elecraft] K3 Notch   Merle Bone
• [Elecraft] Elecraft K2   Patrick Bourgeois
• [Elecraft] K2 S/N 05143 is on the air!   Patrick Bourgeois
• [Elecraft] Re： K2 S/N 05143 is on the air!   Patrick Bourgeois
• [Elecraft] New W2 Firmware release rev 1.00   Brian
• [Elecraft] KPA-500 Question   Jack Brindle
• [Elecraft] Mac OS X and K3 Utility Opinions?   Jack Brindle
• [Elecraft] N1MM & K3   Jim Brown
• [Elecraft] CM-500 Response (was: Heil HC-4, HC-5)   Jim Brown
• [Elecraft] CM-500 Response (was: Heil HC-4, HC-5)   Jim Brown
• [Elecraft] CM-500 Response (was: Heil HC-4, HC-5)   Jim Brown
• [Elecraft] K3 - Performance on 6M?   Jim Brown
• [Elecraft] Older Serial# K3   Jim Brown
• [Elecraft] [K3] HRD, PSK31, and Elecraft USB-Serial Cable   Jim Brown
• [Elecraft] K3, sound cards and PSK31   Jim Brown
• [Elecraft] Using "Buddi Pole" Deluxe Antenna with K3   Jim Brown
• [Elecraft] 2.7 vs 2.8   Jim Brown
• [Elecraft] Ten Tec never sounded so good!   Jim Brown
• [Elecraft] Power Outlets for Ham Shacks   Jim Brown
• [Elecraft] Snap-On Ferrites and RF Noise On 160M   Jim Brown
• [Elecraft] News from Visalia! (:-))   Jim Brown
• [Elecraft] Grounding negative side of power supply?   Jim Brown
• [Elecraft] : Re: News from Visalia! (:-))   Jim Brown
• [Elecraft] Leakage Flux from Toroidal Transformer   Jim Brown
• [Elecraft] Grounding negative side of power supply?   Jim Brown
• [Elecraft] Grounding negative side of power supply?   Jim Brown
• [Elecraft] Electret microphone wiring   Jim Brown
• [Elecraft] [K3] Line in / out socket failure   Jim Brown
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Jim Brown
• [Elecraft] k2 headphone jack   Jim Brown
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Jim Brown
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Jim Brown
• [Elecraft] Compression and noise - was W2IHY 8 band equalizer and EQ Plus   Jim Brown
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Jim Brown
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Jim Brown
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Jim Brown
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Jim Brown
• [Elecraft] 2.7 vs 2.8 Defense of 2.7   John Buck
• [Elecraft] {K-2} FS   Phillip Buckholdt
• [Elecraft] K3 Edgeport Adapter with K3 and SteppIR   Bud Governale, W3LL
• [Elecraft] K3 replaced your Pro III   Greg Buhyoff
• [Elecraft] Wow! Nice Knobs :-)   Lee Buller
• [Elecraft] K3 Memory Editor (PC application): looking for testers   Wayne Burdick
• [Elecraft] time to order your P3 >>>>   Wayne Burdick
• [Elecraft] [K3] MD3; or MD7; command changes VFO B filter settings   Wayne Burdick
• [Elecraft] K3 Beta Firmware Rev. 3.94: Enhancements to RX & TX EQ, European FM & repeater operation, etc.   Wayne Burdick
• [Elecraft] How to use external ALC with the K3 (applies to the SPE Expert or any other amplifier)   Wayne Burdick
• [Elecraft] K3 - Performance on 6M?   WILLIS COOKE
• [Elecraft] OT: Up two ?   WILLIS COOKE
• [Elecraft] K3/10 help !?   WILLIS COOKE
• [Elecraft] DC-supply for a preamp?   WILLIS COOKE
• [Elecraft] DC-supply for a preamp?   WILLIS COOKE
• [Elecraft] DC-supply for a preamp?   WILLIS COOKE
• [Elecraft] KD9SV DXPedition II and diversity   Jorge Diez - CX6VM
• [Elecraft] SUB AF = BALANCE problem   Jorge Diez - CX6VM
• [Elecraft] listening in the SUB RX   Jorge Diez - CX6VM
• [Elecraft] K3 front end protection   Jorge Diez - CX6VM
• [Elecraft] K3 ATU TUNE per band only?   Jorge Diez - CX6VM
• [Elecraft] K3 ATU TUNE per band only?   Jorge Diez - CX6VM
• [Elecraft] News from Visalia! (:-))   Duncan Carter
• [Elecraft] K3 Memory Manager - MCU 3.94   Duncan Carter
• [Elecraft] CW/CW-REV config option   Duncan Carter
• [Elecraft] Don   H. Cary
• [Elecraft] K3 and Expert 1K-FA   Franco Cazzaniga
• [Elecraft] KUSB   Peter Chamalian
• [Elecraft] multi port usb hub and k3 KUSB   Peter Chamalian
• [Elecraft] "TX IMD problem"   Kok Chen
• [Elecraft] K3, sound cards and PSK31   Kok Chen
• [Elecraft] K3, sound cards and PSK31   Kok Chen
• [Elecraft] P3   Kok Chen
• [Elecraft] P3 color selection (was Re: time to order your P3, design details?)   Kok Chen
• [Elecraft] K3 Programmer's Reference iPhone App Available   Kok Chen
• [Elecraft] K3 Programmer's Reference iPhone App Available   Kok Chen
• [Elecraft] Mac OS X and K3 Utility Opinions?   Kok Chen
• [Elecraft] 64 bit prolific driver for Snow Leopard   David Christ
• [Elecraft] Snap-On Ferrites and RF Noise On 160M   David Christ
• [Elecraft] International Shipping Charges!!??!!   David Christ
• [Elecraft] OT MFJ 259B analyzer for sale   David Christ
• [Elecraft] OT MFJ 259B analyzer SOLD pending payment   David Christ
• [Elecraft] KPA500   Paul Christensen
• [Elecraft] News from Visalia!   Paul Christensen
• [Elecraft] News from Visalia!   Paul Christensen
• [Elecraft] External Power Supply for the KPA-500   Paul Christensen
• [Elecraft] K3 and Expert 1K-FA   Paul Christensen
• [Elecraft] K3 and Expert 1K-FA   Paul Christensen
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Paul Christensen
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Paul Christensen
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Paul Christensen
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Paul Christensen
• [Elecraft] FW: QSK THUMPS?   Paul Christensen
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Paul Christensen
• [Elecraft] K2 capacitor specifications   Dave Clausen
• [Elecraft] RTTY using DATA mode on K3   Derek Cohn/WB0TUA
• [Elecraft] RTTY using DATA mode on K3 (FIXED!)   Derek Cohn/WB0TUA
• [Elecraft] ERR 12V on K3   Derek Cohn/WB0TUA
• [Elecraft] K3 - Performance on 6M?   Edward Cole
• [Elecraft] TEST   Edward Cole
• [Elecraft] Using the 12v OUT Jack   Edward Cole
• [Elecraft] 2.7 vs 2.8   Edward Cole
• [Elecraft] Ten Tec never sounded so good!   Edward Cole
• [Elecraft] News from Visalia!   Edward Cole
• [Elecraft] 300w HF amp/kit   Edward Cole
• [Elecraft] 2N2222 Final   Edward Cole
• [Elecraft] Grounding negative side of power supply?   Edward Cole
• [Elecraft] K3 Portability   Edward Cole
• [Elecraft] K3 Speaker   Edward Cole
• [Elecraft] DC-supply for a preamp?   Edward Cole
• [Elecraft] K2 filter alignment   Bill Coleman
• [Elecraft] Elecraft Amps   Bill Coleman
• [Elecraft] Grounding negative side of power supply?   Bill Coleman
• [Elecraft] K2 filter alignment question   Bill Coleman
• [Elecraft] New Power Supply   Bill Coleman
• [Elecraft] KPA500   Bill Coleman
• [Elecraft] Snap-On Ferrites and RF Noise On 160M   Bill Coleman
• [Elecraft] External Power Supply for the KPA-500   Bill Coleman
• [Elecraft] Grounding negative side of power supply?   Bill Coleman
• [Elecraft] QSK THUMPS?   Bill Coleman
• [Elecraft] K2: PSK-31 Power Settings   Bill Coleman
• [Elecraft] K3 - Performance on 6M?   Lance Collister
• [Elecraft] K3 Memory Editor (PC application): looking for testers   Lance Collister
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Lance Collister
• [Elecraft] DC-supply for a preamp?   Lance Collister
• [Elecraft] DC-supply for a preamp?   Lance Collister
• [Elecraft] DC-supply for a preamp?   Lance Collister
• [Elecraft] DC-supply for a preamp?   Lance Collister
• [Elecraft] Older Serial# K3   David and Dianne on Comcast
• [Elecraft] Ten Tec never sounded so good!   David and Dianne on Comcast
• [Elecraft] News from Visalia! (:-))   David and Dianne on Comcast
• [Elecraft] News from Visalia! (:-))   David and Dianne on Comcast
• [Elecraft] News from Visalia! (:-))   David and Dianne on Comcast
• [Elecraft] News from Visalia!   David and Dianne on Comcast
• [Elecraft] KPA500   Rick Commo
• [Elecraft] Heil HC-4, HC-5   Robert 'RC' Conley
• [Elecraft] 1sv149 diode   Robert 'RC' Conley
• [Elecraft] Fun with your P3   Pete Connors
• [Elecraft] Prolific drivers and Mac OS   Randy Cook
• [Elecraft] Usefulness of the the list   Jim Cox
• [Elecraft] Older Serial# K3   Don Cunningham
• [Elecraft] K3 Cooling   Don Cunningham
• [Elecraft] RTTY and best IMD, cooling, etc   Don Cunningham
• [Elecraft] RTTY and best IMD, cooling, etc   Don Cunningham
• [Elecraft] Ten Tec never sounded so good!   Don Cunningham
• [Elecraft] K3 Cooling   Bob Cunnings
• [Elecraft] K3 button problem question   Bob Cunnings
• [Elecraft] P3 shipping status query   Bob Cunnings
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Bob Cunnings
• [Elecraft] K3 Notch   Bob Cunnings
• [Elecraft] K2: PSK-31 Power Settings   Bob Cunnings
• [Elecraft] K2: PSK-31 Power Settings   Bob Cunnings
• [Elecraft] K1 for Sale, again.   Jim Curione
• [Elecraft] Elecraft K3 with K2 as station panadapter setup?   David Cutter
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   David Cutter
• [Elecraft] K3 Notch   David Cutter
• [Elecraft] [K3] K3DSPUPGD or K3DSPLPF   DC1RS
• [Elecraft] [K3] K3DSPUPGD or K3DSPLPF   DC1RS
• [Elecraft] XV-series Transverters and K3?   DM4iM
• [Elecraft] Re： XV-series Transverters and K3?   DM4iM
• [Elecraft] DC-supply for a preamp?   DM4iM
• [Elecraft] DC-supply for a preamp?   DM4iM
• [Elecraft] Re:KPA500   Roger Dallimore
• [Elecraft] In Reference to: k2 pll and ref osc issues n0xdb   Roger Dallimore
• [Elecraft] Current K144XV Firmware Revisions   Roger Dallimore
• [Elecraft] RE: Current K144XV Firmware Revisions   Roger Dallimore
• [Elecraft] K3 - Performance on 6M?   Dave, G4AON
• [Elecraft] Older Serial# K3   Dave, G4AON
• [Elecraft] RTTY and best IMD, cooling, etc   Dave, G4AON
• [Elecraft] K3 - KPAIO3 'Puller'   Dave, W8OV
• [Elecraft] Just installed KSUN3!   David Ferrington, M0XDF
• [Elecraft] signing stroke - getting OT now   David Ferrington, M0XDF
• [Elecraft] Prolific drivers and Mac OS   David Ferrington, M0XDF
• [Elecraft] K3 Memory Editor software application (new release)   David Ferrington, M0XDF
• [Elecraft] 2.7 vs 2.8   David Ferrington, M0XDF
• [Elecraft] 2.7 vs 2.8   David Ferrington, M0XDF
• [Elecraft] 2.7 vs 2.8   David Ferrington, M0XDF
• [Elecraft] time to order your P3 >>>>   David Ferrington, M0XDF
• [Elecraft] time to order your P3 >>>>   David Ferrington, M0XDF
• [Elecraft] [K3] K3DSPUPGD or K3DSPLPF   David Ferrington, M0XDF
• [Elecraft] time to order your P3 >>>>   David Ferrington, M0XDF
• [Elecraft] time to order your P3 >>>>   David Ferrington, M0XDF
• [Elecraft] How is the P3 Connected to the K3?   David Ferrington, M0XDF
• [Elecraft] time to order your P3 >>>>   David Ferrington, M0XDF
• [Elecraft] [K3] K3DSPUPGD or K3DSPLPF   David Ferrington, M0XDF
• [Elecraft] KPA500   David Ferrington, M0XDF
• [Elecraft] KPA500   David Ferrington, M0XDF
• [Elecraft] [K3] K3DSPUPGD or K3DSPLPF   David Ferrington, M0XDF
• [Elecraft] RS232 connectivity P3/KPA500   David Ferrington, M0XDF
• [Elecraft] External Power Supply for the KPA-500   David Ferrington, M0XDF
• [Elecraft] multi port usb hub and k3 KUSB   David Ferrington, M0XDF
• [Elecraft] Lead based solder on RoHS boards?   David Ferrington, M0XDF
• [Elecraft] multi port usb hub and k3 KUSB   David Ferrington, M0XDF
• [Elecraft] Anderson Power Pole.   David Ferrington, M0XDF
• [Elecraft] Mac OS X and K3 Utility Opinions?   David Ferrington, M0XDF
• [Elecraft] Data Modes Software for Mac   David Herring, K6DCH
• [Elecraft] Elecraft Digests   Peter Dent
• [Elecraft] [elecraft] k2 alignment testing   Dickinson, Joe
• [Elecraft] k2 headphone jack   Dickinson, Joe
• [Elecraft] K2 Popularity   Dickinson, Joe
• [Elecraft] K3: Driving Data Modes Using Dell Dimension 8400   Dickinson, Joe
• [Elecraft] k2 need transmitt trouble help from N0XDB Joe   Dickinson, Joe
• [Elecraft] Heil HC-4, HC-5   Dick Dievendorff
• [Elecraft] K3 Firmware Update.   Dick Dievendorff
• [Elecraft] K3 Utility problem   Dick Dievendorff
• [Elecraft] K3 KXV3A without Xverters, sub receiver or P3   Dick Dievendorff
• [Elecraft] K3: latest Prolific drivers for the KUSB   Dick Dievendorff
• [Elecraft] EQ per mode?   Dick Dievendorff
• [Elecraft] EQ per mode?   Dick Dievendorff
• [Elecraft] EQ per mode?   Dick Dievendorff
• [Elecraft] remote shut off   Dick Dievendorff
• [Elecraft] Future KX1 owner   Dick Dievendorff
• [Elecraft] How is the P3 Connected to the K3?   Dick Dievendorff
• [Elecraft] Another method to calibrate reference oscillator in K3.   Dick Dievendorff
• [Elecraft] Elecraft K3 Frequency Memory Editor   Dick Dievendorff
• [Elecraft] K3 not turning off   Dick Dievendorff
• [Elecraft] FS K2/10 S/N 4629   Mike Donovan
• [Elecraft] K2/10 New Lower Price   Mike Donovan
• [Elecraft] KPA500   Jerry T. Dowell
• [Elecraft] SUB Rcv'r - 'USE AUX' message   Geoffrey Downs
• [Elecraft] K3 Programmer's Reference iPhone App Available   Michael Downs
• [Elecraft] Seems to be confusion!   George Dubovsky
• [Elecraft] K3 - Performance on 6M?   James Duffey
• [Elecraft] K3 - Performance on 6M?   James Duffey
• [Elecraft] K3 - Performance on 6M?   James Duffey
• [Elecraft] CM-500 Response (was: Heil HC-4, HC-5)   David Dunn
• [Elecraft] K3 option request   David Dunn
• [Elecraft] K3Split option request   David Dunn
• [Elecraft] CM500   David Dunn
• [Elecraft] K3 birdies   Eugeni - EA3QP
• [Elecraft] CW/CW-REV config option   Juan EA5RS
• [Elecraft] Power output   Earl
• [Elecraft] OT: The knack   Ed, W9EJB
• [Elecraft] K3 - 15 Pin Y-Cable   Edward Dickinson, III
• [Elecraft] KPA500 - Modular and Upgradable..?   Edward Dickinson, III
• [Elecraft] P3 and KPA500 Photos   Edward Dickinson, III
• [Elecraft] P3 and KPA500 Photos   Edward Dickinson, III
• [Elecraft] Remotable external tuner   Edward Dickinson, III
• [Elecraft] External Power Supply for the KPA-500   Edward Dickinson, III
• [Elecraft] KPA-500 - Heat   Edward Dickinson, III
• [Elecraft] time to order your P3 >>>>   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] time to order your P3 >>>>   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] Ten Tec never sounded so good!   Steve Ellington
• [Elecraft] [Elecraft_K3] K3 Beta Firmware Rev. 3.94: Enhancements to RX & TX EQ, European FM & repeater operation, etc.   Steve Ellington
• [Elecraft] Data Modes Software for Mac   David M. Elliott
• [Elecraft] joke [END of Thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 - Performance on 6M?   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 dumb Q about PPM [END of Thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 Cooling [ END of thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] time to order your P3 >>>>   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] How is the P3 Connected to the K3?   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] News from Visalia!   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] My feelings [Edd of thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] My feelings [END of Thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] My feelings   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] News from Visalia!   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] P3 Information Page now on Elecraft Web Page   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] P3 Information Page now on Elecraft Web Page   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Usefulness of the the list [END of Thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Seems to be confusion! [END of Thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Wow! Nice Knobs :-) [END of Thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Re： International Shipping Charges !!??!! [END of Thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 Programmer's Reference iPhone App Available   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 Notch [END of Thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Fw: PR6 6 Meter Preamp Installation   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 Programmer's Reference iPhone App Available [End of thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] CW/CW-REV config option [END of Thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KPA500 active devices!!   Eric Swartz - WA6HHQ, Elecraft.
• [Elecraft] k2 pll and ref osc issues n0xdb   Eric Swartz - WA6HHQ, Elecraft.
• [Elecraft] Voice Announcement   Eric Swartz - WA6HHQ, Elecraft.
• [Elecraft] OT: Custom case for AADE L/C Meter   Mike F.
• [Elecraft] K2 S/N 05143 is on the air!   RONALD R FREEMAN
• [Elecraft] RS-232 connections   RONALD R FREEMAN
• [Elecraft] disabled controls during TX   Andrew Faber
• [Elecraft] K3 as hand luggage   Andrew Faber
• [Elecraft] Just installed KSUN3!   Pontus Falk
• [Elecraft] Just installed KSUN3!   Pontus Falk
• [Elecraft] K3 dumb Q about PPM, less dumb one about NB   Randy Farmer
• [Elecraft] External Power Supply for the KPA-500   Mel Farrer
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Mel Farrer
• [Elecraft] K3/10 help !?   Mel Farrer
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Mel Farrer
• [Elecraft] K3 PSK31 threshold/ 10W amp duty cycle.   Richard Ferch
• [Elecraft] RTTY using DATA mode on K3   Richard Ferch
• [Elecraft] K3 button problem question   Paul Ferguson
• [Elecraft] K3 button problem question   Paul Ferguson
• [Elecraft] K2 filter alignment   Ed Finn
• [Elecraft] k2 headphone jack   Ed Finn
• [Elecraft] New W2 Interface Software v1.1.4.12   David Fleming
• [Elecraft] RS232 connectivity P3/KPA500   Doug Fleming
• [Elecraft] subscribe   Foxjazz
• [Elecraft] question...   Foxjazz
• [Elecraft] k2 assembly question   Foxjazz
• [Elecraft] k2 assembly other question   Foxjazz
• [Elecraft] k2 assembly lcd   Foxjazz
• [Elecraft] k2 assembly next question.   Foxjazz
• [Elecraft] k2 rf assembly part 1 question pg 35   Foxjazz
• [Elecraft] k2 assembly tilt stand   Foxjazz
• [Elecraft] k2 pll and ref osc issues n0xdb   Foxjazz
• [Elecraft] k2 pll and ref osc issues n0xdb   Foxjazz
• [Elecraft] k2 pll and ref osc issues n0xdb   Foxjazz
• [Elecraft] k2 pll and ref osc issues n0xdb WTF   Foxjazz
• [Elecraft] k2 pll and ref osc issues n0xdb WTF   Foxjazz
• [Elecraft] News from Visalia!   John Fritze
• [Elecraft] BCD voltage   Alfred Frugoli
• [Elecraft] ERR TXG problem.   Alfred Frugoli
• [Elecraft] [K3] Line in / out socket failure   Dr. Werner Furlan
• [Elecraft] K3 on 60m in the UK?   Ian Wade G3NRW
• [Elecraft] K3: Driving Data Modes Using Dell Dimension 8400   ALAN GARD
• [Elecraft] K3 600Hz shift when A/B pressed (cw/ssb)   GM0ELP
• [Elecraft] [K3] K3DSPUPGD or K3DSPLPF   GM0ELP
• [Elecraft] KPA500   Ian White GM3SEK
• [Elecraft] In Reference to: k2 pll and ref osc issues n0xdb   T Gahagan
• [Elecraft] New Guy   Bob Garceau
• [Elecraft] New Guy   Bob Garceau
• [Elecraft] 2.7 vs 2.8   Bob Garceau
• [Elecraft] Voice Announcement   Bob Garrett
• [Elecraft] [K3] P3 and hardware updates   Gary, W7TEA
• [Elecraft] K3 P3 video   Gary, W7TEA
• [Elecraft] QSK THUMPS?   Gary, W7TEA
• [Elecraft] CW/CW-REV config option   Gary, W7TEA
• [Elecraft] Ten Tec never sounded so good!   George
• [Elecraft] 2.7 vs 2.8   Michael Germino
• [Elecraft] 12 volt PA   David Gilbert
• [Elecraft] P3   David Gilbert
• [Elecraft] P3   David Gilbert
• [Elecraft] K3 birdies   David Gilbert
• [Elecraft] External Power Supply for the KPA-500   David Gilbert
• [Elecraft] Missing Posts   David Gilbert
• [Elecraft] International Shipping Charges!!??!!   David Gilbert
• [Elecraft] CW/CW-REV config option   David Gilbert
• [Elecraft] blinking SPLIT icon   Mike Goldstein
• [Elecraft] Heil Headset with boom mic for sale.   Ron Gould
• [Elecraft] Fwd: Heil Headset with boom mic for sale.   Ron Gould
• [Elecraft] Ten Tec never sounded so good!   Ron Gould
• [Elecraft] Ten Tec never sounded so good!   Ron Gould
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Ron Gould
• [Elecraft] K3 option request   Greg
• [Elecraft] News from Visalia! (:-))   Greg
• [Elecraft] test   Gary Gregory
• [Elecraft] OT Stroke   Gary Gregory
• [Elecraft] RTTY and best IMD, cooling, etc   Gary Gregory
• [Elecraft] K3 option request   Gary Gregory
• [Elecraft] OT: Up two ?   Gary Gregory
• [Elecraft] K3 KAT3 forgets settings   Gary Gregory
• [Elecraft] Ten Tec never sounded so good!   Gary Gregory
• [Elecraft] OK... what am I missing now?   Gary Gregory
• [Elecraft] KPA500   Gary Gregory
• [Elecraft] K3 Voice announcement   Gary Gregory
• [Elecraft] KPA500 active devices!!   Gary Gregory
• [Elecraft] News from Visalia! (:-))   Gary Gregory
• [Elecraft] KPA500 AMP Frequency Coverage   Gary Gregory
• [Elecraft] P3 and KPA500 Photos   Gary Gregory
• [Elecraft] OT DXpedition WFF44   Gary Gregory
• [Elecraft] Usefulness of the the list   Gary Gregory
• [Elecraft] K3 Replaced Your Pro III?   Gary Gregory
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Gary Gregory
• [Elecraft] OT: Don / Unidentified list posters   Chuck Guenther
• [Elecraft] Elecraft SSB Net   David Guernsey
• [Elecraft] K3 Voice Announcements   David Guernsey
• [Elecraft] Data Modes Software for Mac   David Guernsey
• [Elecraft] disabled controls during TX   HA3AUI
• [Elecraft] disabled controls during TX   HA3AUI
• [Elecraft] Mea culpa (KPA-500)   Richard Squire - HB9ANM
• [Elecraft] Fw: I was kicked out of biology class   NORMAN HEGYI
• [Elecraft] joke   NORMAN HEGYI
• [Elecraft] New K3   Dennis Haarsager
• [Elecraft] K3 button problem question   Dave Hachadorian
• [Elecraft] K3 Power Out   Glenn Haffly
• [Elecraft] K3 Memory Manager - MCU 3.94   Joel R. Hallas
• [Elecraft] K3 - KPAIO3 'Puller'   Tom Hammond
• [Elecraft] N0SS' KPAIO3 Puller - Updated   Tom Hammond
• [Elecraft] K3 Right Side Cover... Solution to a problem no one knew they had   Tom Hammond
• [Elecraft] 2.7 vs 2.8   Augie Hansen
• [Elecraft] KPA500   John Harper
• [Elecraft] News from Visalia! (:-))   John Harper
• [Elecraft] K3 Cooling   Jim Harris
• [Elecraft] K3 Cooling   Jim Harris
• [Elecraft] K3 Cooling   Jim Harris
• [Elecraft] PSK31   Mike Harris
• [Elecraft] K3 - Performance on 6M?   Mike Harris
• [Elecraft] KPA500   Mike Harris
• [Elecraft] RTTY using DATA mode on K3   Mike Harris
• [Elecraft] [K3] 1.0 Milliwatt Calibration   Jon K Hellan
• [Elecraft] Lead based solder on RoHS boards?   Jon K Hellan
• [Elecraft] RX/TX antenna switching   Jon K Hellan
• [Elecraft] Older Serial# K3   Jeff Herr
• [Elecraft] K3 option request   Richard Hill
• [Elecraft] External Power Supply for the KPA-500   Richard Hill
• [Elecraft] RTTY using DATA mode on K3   Gary Hinson
• [Elecraft] K3 PTT dropouts on CW   Gary Hinson
• [Elecraft] K3 CW/CW-REV config option   Gary Hinson
• [Elecraft] TX IMD problem   Jan Erik Holm
• [Elecraft] K3 ALC meter   Jan Erik Holm
• [Elecraft] RX/TX antenna switching   Kjeld Holm
• [Elecraft] Lead based solder on RoHS boards?   David Honey
• [Elecraft] disabled controls during TX   Brett Howard
• [Elecraft] K3 Cooling   Brett Howard
• [Elecraft] 2.7 vs 2.8 vs 1.8 & 2.1   Brett Howard
• [Elecraft] P3   Brett Howard
• [Elecraft] K3 600Hz shift when A/B pressed (cw/ssb)   Brett Howard
• [Elecraft] K3 600Hz shift when A/B pressed (cw/ssb)   Brett Howard
• [Elecraft] [K3] K3DSPUPGD or K3DSPLPF   Brett Howard
• [Elecraft] K3 not turning off   Brett Howard
• [Elecraft] K2: PSK-31 Power Settings   Brett Howard
• [Elecraft] tuning range 80 khz or 150 khz?   Brett Howard
• [Elecraft] K3 power output on SSB   Ruben Navarro Huedo
• [Elecraft] time to order your P3 >>>>   Ruben Navarro Huedo
• [Elecraft] How is the P3 Connected to the K3?   Ruben Navarro Huedo
• [Elecraft] Your K2 Questions   Paul Huff
• [Elecraft] k2 assembly tilt stand   Paul Huff
• [Elecraft] K2 displayed power during final part 3 alignment   Paul Huff
• [Elecraft] k2 assembly question   Gary Hvizdak
• [Elecraft] k2 rf assembly part 1 question pg 35   Gary Hvizdak
• [Elecraft] "How are you measuring resistance?" -- was "Testing anti-static mats ..."   Gary Hvizdak
• [Elecraft] power   Gary Hvizdak
• [Elecraft] any advice to fix it?   Gary Hvizdak
• [Elecraft] "ea3qp at yahoo.es " -- was "any advice to fix it?"   Gary Hvizdak
• [Elecraft] Lead based solder on RoHS boards?   Gary Hvizdak
• [Elecraft] [K3] Firmware Update via K3 USB Utility   Phil Hystad
• [Elecraft] K3 dumb Q about PPM, less dumb one about NB   Phil Hystad
• [Elecraft] Older Serial# K3   Phil Hystad
• [Elecraft] [K3] HRD, PSK31, and Elecraft USB-Serial Cable   Phil Hystad
• [Elecraft] QRP, Portable, and Compromise Antennas   Phil Hystad
• [Elecraft] QRP, Portable, and Compromise Antennas   Phil Hystad
• [Elecraft] time to order your P3 >>>>   Phil Hystad
• [Elecraft] P3   Phil Hystad
• [Elecraft] External Power Supply for the KPA-500   Phil Hystad
• [Elecraft] N0SS' KPAIO3 Puller - Updated   Phil Hystad
• [Elecraft] Seems to be confusion!   Phil Hystad
• [Elecraft] [K3] CW Sidetone Pitch Change Problem   Phil Hystad
• [Elecraft] [K3] CW Sidetone Pitch Change Problem   Phil Hystad
• [Elecraft] [K3] CW Sidetone Pitch Change Problem   Phil Hystad
• [Elecraft] K3 Programmer's Reference iPhone App Available   Phil Hystad
• [Elecraft] K3 PA Power Loss with Subreceiver Install   Ipman IP
• [Elecraft] K3 Keying Up For A Split Second When Power Button, IsPushed (Tom W8JI)   Ignacy
• [Elecraft] K2 full power delay on CW   J.A. Wolf, MD, K6JW
• [Elecraft] K2 power delay on CW   J.A. Wolf, MD, K6JW
• [Elecraft] [K3] CTCSS deviation setting in new firmware   Steve Jackson
• [Elecraft] Using the 12v OUT Jack   George & Jan
• [Elecraft] K3 Notch   George & Jan
• [Elecraft] kio2   Rolf Jansson
• [Elecraft] KRC2 and the Kenwood TS950   JayKay
• [Elecraft] K3 Utility problem   Fred Jensen
• [Elecraft] K3 option request   Fred Jensen
• [Elecraft] 2.7 vs 2.8   Fred Jensen
• [Elecraft] [K3] K3DSPUPGD or K3DSPLPF   Fred Jensen
• [Elecraft] KPA500   Fred Jensen
• [Elecraft] time to order your P3, design details?   Fred Jensen
• [Elecraft] Mea culpa (KPA-500)   Fred Jensen
• [Elecraft] Mea culpa (KPA-500)   Fred Jensen
• [Elecraft] Seems to be confusion!   Fred Jensen
• [Elecraft] Heil HC-4, HC-5   Joe Subich, W4TV
• [Elecraft] Heil HC-4, HC-5   Joe Subich, W4TV
• [Elecraft] CM-500 Response (was: Heil HC-4, HC-5)   Joe Subich, W4TV
• [Elecraft] CM-500 Response (was: Heil HC-4, HC-5)   Joe Subich, W4TV
• [Elecraft] CM-500 Response (was: Heil HC-4, HC-5)   Joe Subich, W4TV
• [Elecraft] K3 - Performance on 6M?   Joe Subich, W4TV
• [Elecraft] K3 - Performance on 6M?   Joe Subich, W4TV
• [Elecraft] K3, sound cards and PSK31   Joe Subich, W4TV
• [Elecraft] OT Sound Card and USB to Serial Port Hub   Joe Subich, W4TV
• [Elecraft] K3, sound cards and PSK31   Joe Subich, W4TV
• [Elecraft] K3/LPBRIDGE/FLDIGI   Joe Subich, W4TV
• [Elecraft] OT Sound Card and USB to Serial Port Hub   Joe Subich, W4TV
• [Elecraft] K3 - 15 Pin Y-Cable   Joe Subich, W4TV
• [Elecraft] K3 option request   Joe Subich, W4TV
• [Elecraft] 2.7 vs 2.8   Joe Subich, W4TV
• [Elecraft] time to order your P3 >>>>   Joe Subich, W4TV
• [Elecraft] Ten Tec never sounded so good!   Joe Subich, W4TV
• [Elecraft] time to order your P3 >>>>   Joe Subich, W4TV
• [Elecraft] KPA500   Joe Subich, W4TV
• [Elecraft] KPA500 active devices!!   Joe Subich, W4TV
• [Elecraft] KPA500 active devices!!   Joe Subich, W4TV
• [Elecraft] : Re: News from Visalia! (:-))   Joe Subich, W4TV
• [Elecraft] : Re: News from Visalia! (:-))   Joe Subich, W4TV
• [Elecraft] KPA-500 Question   Joe Subich, W4TV
• [Elecraft] K3 Notch   Joe Subich, W4TV
• [Elecraft] K3 Notch   Joe Subich, W4TV
• [Elecraft] K3 Notch   Joe Subich, W4TV
• [Elecraft] K3: Driving Data Modes Using Dell Dimension 8400   Joe Subich, W4TV
• [Elecraft] K3: Driving Data Modes Using Dell Dimension 8400   Joe Subich, W4TV
• [Elecraft] Data Modes Software for Mac   Joe Subich, W4TV
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Joe Subich, W4TV
• [Elecraft] CW/CW-REV config option   Joe Subich, W4TV
• [Elecraft] CW/CW-REV config option   Joe Subich, W4TV
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Joe Subich, W4TV
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Joe Subich, W4TV
• [Elecraft] K3 Cooling   John
• [Elecraft] K3 not turning off   JohnK1JD
• [Elecraft] -- SPAM -- RE: K3 not turning off   JohnK1JD
• [Elecraft] How to pronounce the "/"?   O. Johns
• [Elecraft] Older Serial# K3   Lyle Johnson
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Lyle Johnson
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Lyle Johnson
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Lyle Johnson
• [Elecraft] [K3] CW Sidetone Pitch Change Problem   Rick Johnson
• [Elecraft] Fw: PR6 6 Meter Preamp Installation   Doug Joyce
• [Elecraft] P3 weak sig detection / 2m internal transverter   Bill Davis Jr
• [Elecraft] CW speed is diferent in N1MM and in K3   Julian, G4ILO
• [Elecraft] K3 / FLDIGI problem...   Julian, G4ILO
• [Elecraft] How to pronounce the "/"?   Julian, G4ILO
• [Elecraft] [Elecraft K3] Serial port test   Julian, G4ILO
• [Elecraft] K3 Firmware Update.   Julian, G4ILO
• [Elecraft] Older Serial# K3   Julian, G4ILO
• [Elecraft] K3: latest Prolific drivers for the KUSB   Julian, G4ILO
• [Elecraft] EQ per mode?   Julian, G4ILO
• [Elecraft] [K3] 1.0 Milliwatt Calibration   Julian, G4ILO
• [Elecraft] [K3] Line in / out socket failure   Julian, G4ILO
• [Elecraft] OT Sound Card and USB to Serial Port Hub   Jim Rhodes K0XU
• [Elecraft] K3 Split option idea   Rich - K1HTV
• [Elecraft] CW/CW-REV config option   Rich - K1HTV
• [Elecraft] K3 PSK31 threshold/ 10W amp duty cycle.   K1LI
• [Elecraft] K3 Keying Up For A Split Second When Power Button Is Pushed   Guy Olinger K2AV
• [Elecraft] disabled controls during TX   Guy Olinger K2AV
• [Elecraft] K3 dumb Q about PPM, less dumb one about NB   Guy Olinger K2AV
• [Elecraft] K3 Firmware Update.   Guy Olinger K2AV
• [Elecraft] K3 AGC changes from SLOW to FAST on scan/stop transition   Guy Olinger K2AV
• [Elecraft] K3 Cooling   Guy Olinger K2AV
• [Elecraft] K3 Cooling   Guy Olinger K2AV
• [Elecraft] K3: latest Prolific drivers for the KUSB   Guy Olinger K2AV
• [Elecraft] RTTY and best IMD, cooling, etc   Guy Olinger K2AV
• [Elecraft] K3 option request   Guy Olinger K2AV
• [Elecraft] PBT Macros   Guy Olinger K2AV
• [Elecraft] K3 power reduction after using TEST mode   Guy Olinger K2AV
• [Elecraft] K3 power reduction after using TEST mode   Guy Olinger K2AV
• [Elecraft] K3 ATU TUNE per band only?   Guy Olinger K2AV
• [Elecraft] time to order your P3 >>>>   Guy Olinger K2AV
• [Elecraft] P3   Guy Olinger K2AV
• [Elecraft] KPA500   Guy Olinger K2AV
• [Elecraft] [K3] K3DSPUPGD or K3DSPLPF   Guy Olinger K2AV
• [Elecraft] KPA500 active devices!!   Guy Olinger K2AV
• [Elecraft] k2 pll and ref osc issues n0xdb   Guy Olinger K2AV
• [Elecraft] News from Visalia!   Guy Olinger K2AV
• [Elecraft] KPA500 active devices!!   Guy Olinger K2AV
• [Elecraft] : Re: News from Visalia! (:-))   Guy Olinger K2AV
• [Elecraft] K3 birdies   Guy Olinger K2AV
• [Elecraft] KUSB   Guy Olinger K2AV
• [Elecraft] multi port usb hub and k3 KUSB   Guy Olinger K2AV
• [Elecraft] Grounding negative side of power supply?   Guy Olinger K2AV
• [Elecraft] K3 and Expert 1K-FA   Guy Olinger K2AV
• [Elecraft] (no subject)   Guy Olinger K2AV
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Guy Olinger K2AV
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Guy Olinger K2AV
• [Elecraft] Wow! Nice Knobs :-)   Guy Olinger K2AV
• [Elecraft] K3 Beta Firmware ??   Guy Olinger K2AV
• [Elecraft] Why Not Remove the Birdies Through a Firmware Update   Guy Olinger K2AV
• [Elecraft] Beware, Make Sure Your Amp Is In Standby If You Turn On the K3   Guy Olinger K2AV
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Guy Olinger K2AV
• [Elecraft] [K3] CW Sidetone Pitch Change Problem   Guy Olinger K2AV
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Guy Olinger K2AV
• [Elecraft] [K3] CW Sidetone Pitch Change Problem   Guy Olinger K2AV
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Guy Olinger K2AV
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Guy Olinger K2AV
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Guy Olinger K2AV
• [Elecraft] QSK THUMPS?   Guy Olinger K2AV
• [Elecraft] [K3] K3DSPUPGD or K3DSPLPF   Larry - K2GN
• [Elecraft] Usefulness of the the list   Larry - K2GN
• [Elecraft] multi port usb hub and k3 KUSB   Howard K2HK
• [Elecraft] K3 option request   K2MK
• [Elecraft] K3 power reduction after using TEST mode   Mike K2MK
• [Elecraft] K3 power reduction after using TEST mode   Mike K2MK
• [Elecraft] K3 birdies   Mike K2MK
• [Elecraft] disabled controls during TX   Vic K2VCO
• [Elecraft] K3 keying at turn-on   Vic K2VCO
• [Elecraft] KPA500 AMP Frequency Coverage   Vic K2VCO
• [Elecraft] KPA500   Vic K2VCO
• [Elecraft] External Power Supply for the KPA-500   Vic K2VCO
• [Elecraft] K3 Beta Firmware ??   Vic K2VCO
• [Elecraft] K3 RF Gain calibration   Ken K3IU
• [Elecraft] K3 Speaker toggle macro   Ken K3IU
• [Elecraft] 2nd Receiver Perceived Problem   K3RWN
• [Elecraft] K3 Cooling   Bob McGraw - K4TAX
• [Elecraft] K3, sound cards and PSK31   Bob McGraw - K4TAX
• [Elecraft] Using "Buddi Pole" Deluxe Antenna with K3   Bob McGraw - K4TAX
• [Elecraft] OT- 60 m band - 5 Mhz   Bob McGraw - K4TAX
• [Elecraft] Prolific drivers and Mac OS   Bob McGraw - K4TAX
• [Elecraft] Ten Tec never sounded so good!   Bob McGraw - K4TAX
• [Elecraft] Ten Tec never sounded so good!   Bob McGraw - K4TAX
• [Elecraft] Ten Tec never sounded so good!   Bob McGraw - K4TAX
• [Elecraft] KPA500   Bob McGraw - K4TAX
• [Elecraft] P3   Bob McGraw - K4TAX
• [Elecraft] KPA500   Bob McGraw - K4TAX
• [Elecraft] Grounding negative side of power supply?   Bob McGraw - K4TAX
• [Elecraft] Grounding negative side of power supply?   Bob McGraw - K4TAX
• [Elecraft] multi port usb hub and k3 KUSB   Bob McGraw - K4TAX
• [Elecraft] K3 Replaced Your Pro III?   Bob McGraw - K4TAX
• [Elecraft] K3 Replaced Your Pro III?   Bob McGraw - K4TAX
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Bob McGraw - K4TAX
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Bob McGraw - K4TAX
• [Elecraft] DC-supply for a preamp?   Bob McGraw - K4TAX
• [Elecraft] [K3] CW Sidetone Pitch Change Problem   Bob McGraw - K4TAX
• [Elecraft] CW/CW-REV config option   Bob McGraw - K4TAX
• [Elecraft] CW/CW-REV config option   Bob McGraw - K4TAX
• [Elecraft] K2 Popularity   K5RC
• [Elecraft] News from Visalia!   K5WA
• [Elecraft] K3 Cooling   K6LE
• [Elecraft] K3, sound cards and PSK31   K6LE
• [Elecraft] Prolific drivers and Mac OS   K6LE
• [Elecraft] K3 option request   K6LE
• [Elecraft] OT: Up two ?   K6LE
• [Elecraft] K3 KAT3 forgets settings   K6LE
• [Elecraft] K3 KAT3 forgets settings   K6LE
• [Elecraft] P3   K6LE
• [Elecraft] Elecraft K3 Frequency Memory Editor   K6LE
• [Elecraft] K3 - Performance on 6M?   Lew Phelps K6LMP
• [Elecraft] K3 as hand luggage   Lew Phelps K6LMP
• [Elecraft] External Power Supply for the KPA-500   Lew Phelps K6LMP
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Lew Phelps K6LMP
• [Elecraft] PR6 6 meter antenna connections   Lew Phelps K6LMP
• [Elecraft] K3 Keying Up For A Split Second When Power Button, IsPushed (Tom W8JI)   Art K6XT
• [Elecraft] KTCX03-1 FS   Art K6XT
• [Elecraft] K3 dumb Q about PPM   Art K6XT
• [Elecraft] Elecraft Digest, Vol 72, Issue 5   Art K6XT
• [Elecraft] K3 birdies   Dale Harding K7DNH
• [Elecraft] K3 - Performance on 6M?   Bill K9YEQ
• [Elecraft] 64 bit prolific driver for Snow Leopard   Bill K9YEQ
• [Elecraft] 2.7 vs 2.8 vs 1.8 & 2.1   Bill K9YEQ
• [Elecraft] 2.7 vs 2.8 vs 1.8 & 2.1   Bill K9YEQ
• [Elecraft] 2.7 vs. 2.8 vs. 1.8 & 2.1   Bill K9YEQ
• [Elecraft] 2.7 vs. 2.8 vs. 1.8 & 2.1   Bill K9YEQ
• [Elecraft] News from Visalia! (:-))   Bill K9YEQ
• [Elecraft] Don   Bill K9YEQ
• [Elecraft] Don   Bill K9YEQ
• [Elecraft] Wow! Nice Knobs :-)   Bill K9YEQ
• [Elecraft] K3/10 help !?   Bill K9YEQ
• [Elecraft] Fw: PR6 6 Meter Preamp Installation   Bill K9YEQ
• [Elecraft] K3 Programmer's Reference iPhone App Available   Jeff KB2M
• [Elecraft] Using "Buddi Pole" Deluxe Antenna with K3   KC2VNI
• [Elecraft] RS232 connectivity P3/KPA500   KF4VTT
• [Elecraft] 2.7 vs 2.8   Jim Miller KG0KP
• [Elecraft] K3 Voice announcement   Jim Miller KG0KP
• [Elecraft] Wow! Nice Knobs :-)   Jim Miller KG0KP
• [Elecraft] tuning range 80 khz or 150 khz?   Byron KI6NUL
• [Elecraft] K1 - Moving the range of 40 meters from 7.100 up to 7.125?   Byron KI6NUL
• [Elecraft] K3 Replaced Your Pro III?   KM4VX
• [Elecraft] KPA500 active devices!!   Dave KQ3T
• [Elecraft] K3 Replaced Your Pro III?   KU5Q
• [Elecraft] K3 Replaced Your Pro III?   KU5Q
• [Elecraft] Elecraft SSB Net Announcement   Phil Kane
• [Elecraft] OT Sound Card and USB to Serial Port Hub   Phil Kane
• [Elecraft] Ten Tec never sounded so good!   Phil Kane
• [Elecraft] Ten Tec never sounded so good!   Phil Kane
• [Elecraft] 12 volt PA   Phil Kane
• [Elecraft] multi port usb hub and k3 KUSB   Phil Kane
• [Elecraft] multi port usb hub and k3 KUSB   Phil Kane
• [Elecraft] Seems to be confusion!   Phil Kane
• [Elecraft] FS: K1 with all the trimmings   Chris Kantarjiev
• [Elecraft] Compression and noise - was W2IHY 8 band equalizer and EQ Plus   John King
• [Elecraft] LP-PAN and other SDR   Adam Koczarski
• [Elecraft] K3 keying at turn-on   Ken Kopp
• [Elecraft] K3 option request   Ken Kopp
• [Elecraft] OT: Up two ?   Ken Kopp
• [Elecraft] OT: Marconi Station, Glace Bay, NS   Ken Kopp
• [Elecraft] News from Visalia! (:-))   Ken Kopp
• [Elecraft] KPA500 - A bit more info   Ken Kopp
• [Elecraft] OT: Don / Unidentified list posters   Ken Kopp
• [Elecraft] multi port usb hub and k3 KUSB   Ken Kopp
• [Elecraft] Mea culpa (KPA-500)   Ken Kopp
• [Elecraft] How to use external ALC with the K3   Ken Kopp
• [Elecraft] K3 Replaced Your Pro III?   Ken Kopp
• [Elecraft] Fw: PR6 6 Meter Preamp Installation   Ken Kopp
• [Elecraft] K3 - SPE Expert 1K-FA and ALC   LA8AW
• [Elecraft] Older Serial# K3   Phil LaMarche
• [Elecraft] Older Serial# K3   Phil LaMarche
• [Elecraft] LP-PAN and other SDR   Phil LaMarche
• [Elecraft] Wow! Nice Knobs :-)   Phil LaMarche
• [Elecraft] Wow! Nice Knobs :-)   Phil LaMarche
• [Elecraft] Seems to be confusion!   Phil LaMarche
• [Elecraft] Seems to be confusion!   Phil LaMarche
• [Elecraft] K3 Programmer's Reference iPhone App Available   Darin Land
• [Elecraft] Data Modes Software for Mac   Darin Land
• [Elecraft] K3 Programmer's Reference iPhone App Available   Darin Land
• [Elecraft] Mac OS X and K3 Utility Opinions?   Darin Land
• [Elecraft] time to order your P3 >>>>   David Lankshear
• [Elecraft] Elecraft International Shipping Charges   David Lankshear
• [Elecraft] RX/TX antenna switching   Fred Lauricella
• [Elecraft] FOR SALE: ELecraft W1 Wattmeter Kit   Elliott Lawrence
• [Elecraft] FOR SALE: ELecraft W1 Wattmeter Kit--SOLD   Elliott Lawrence
• [Elecraft] PR6 6 meter antenna connections   Elliott Lawrence
• [Elecraft] Voice Announcement   Gary Lee
• [Elecraft] switching from vfo a to b in sync am   Gary Lee
• [Elecraft] at1 attenuator questions   Gary Lee
• [Elecraft] 30m DX report with KX1 and K3   Leigh L. Klotz, Jr WA5ZNU
• [Elecraft] P3   Richard S. Lindzen
• [Elecraft] P3   Richard S. Lindzen
• [Elecraft] RESOLVED: Peak SSB Output vs. "Tune" output   Brian Linn
• [Elecraft] PBT Macros   Al Lorona
• [Elecraft] [OT]: Antenna Tuners - one more reason   Al Lorona
• [Elecraft] time to order your P3, design details?   Al Lorona
• [Elecraft] Future KX1 owner   Mike M
• [Elecraft] Future KX1 owner   Mike M
• [Elecraft] K3: latest Prolific drivers for the KUSB   Chris M0PSK
• [Elecraft] Just installed KSUN3!   KARL MARDERIAN
• [Elecraft] Just installed KSUN3!   KARL MARDERIAN
• [Elecraft] OT: The knack   KARL MARDERIAN
• [Elecraft] [K3] Ferrite beads on TMP cables   Brian Machesney
• [Elecraft] [K3] Ferrite beads on TMP cables   Brian Machesney
• [Elecraft] Ten Tec never sounded so good!   Geoffrey Mackenzie-Kennedy
• [Elecraft] K2 Encoder problems continue.   Geoffrey Mackenzie-Kennedy
• [Elecraft] Why Not Remove the Birdies Through a Firmware Update   Geoffrey Mackenzie-Kennedy
• [Elecraft] Need Toroids!   Bill Maddock
• [Elecraft] K3 KXV3A without Xverters, sub receiver or P3   Karl Marderian
• [Elecraft] usb/serial Edgeport (linux)   Mike Markowski
• [Elecraft] Voice Announcement   Mike Markowski
• [Elecraft] UK Elecraft Net Cancellation   Ian Maude
• [Elecraft] K3 RF Gain calibration   Ian Maude
• [Elecraft] K3 RF Gain calibration   Ian Maude
• [Elecraft] K3 RF Gain calibration   Ian Maude
• [Elecraft] K3 not turning off   Ian Maude
• [Elecraft] UK Elecraft SSB net   Ian Maude
• [Elecraft] K3 600Hz shift when A/B pressed (cw/ssb)   Douglas Maxwell
• [Elecraft] K3 600Hz shift when A/B pressed (cw/ssb)   Douglas Maxwell
• [Elecraft] Strange things a happening   Rob May
• [Elecraft] P3 color selection (was Re: time to order your P3, design details?)   Jeremy McDermond
• [Elecraft] [K3] Line in / out socket failure   Jim McDonald
• [Elecraft] Odd power/ALC problem   Bruce McLaughlin
• [Elecraft] K3 power output on SSB   Bruce McLaughlin
• [Elecraft] Grounding negative side of power supply?   Robert Mcgraw
• [Elecraft] Grounding negative side of power supply?   Robert Mcgraw
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Robert Mcgraw
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Robert Mcgraw
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Robert Mcgraw
• [Elecraft] K2: PSK-31 Power Settings   Robert Mcgraw
• [Elecraft] OT: Identify Transistor   Paul Meier
• [Elecraft] 2.7 vs 2.8   Mike
• [Elecraft] K3 Memory Editor software application version 1.0.102.0 (4/12 version)   Mike
• [Elecraft] Seems to be confusion!   Mike
• [Elecraft] K3 Speaker toggle macro   Mike
• [Elecraft] KX1 Wanted   G. Jude Miller
• [Elecraft] K3/10 w/ sub current draw?   Jim Miller
• [Elecraft] K3/10 w/ sub current draw?   Jim Miller
• [Elecraft] News from Visalia!   Jim Miller
• [Elecraft] Wow! Nice Knobs :-)   Bill Miner
• [Elecraft] [K3] 1.0 Milliwatt Calibration   Bill Miner
• [Elecraft] Irish / Northern Irish Elecraft events   Brendan Minish
• [Elecraft] [K3] Line in / out socket failure   Brendan Minish
• [Elecraft] CW/CW-REV config option   Brendan Minish
• [Elecraft] internet remote to K3   Björn Mohr
• [Elecraft] K3 Programmer's Reference iPhone App Available   Jon Moody
• [Elecraft] FS: Rigblaster Plus   Randy Moore
• [Elecraft] FS: Rigblaster Plus   Randy Moore
• [Elecraft] OT: Test   Randy Moore
• [Elecraft] ESD wriststrap and gloves question   Sam Morgan
• [Elecraft] K3 #4123 now radio active   Sam Morgan
• [Elecraft] OT WTB Softrock for K3 pan   Sam Morgan
• [Elecraft] OT WTB Softrock for K3 pan   Sam Morgan
• [Elecraft] Elecraft K3 with K2 as station panadapter setup?   Sam Morgan
• [Elecraft] Elecraft K3 with K2 as station panadapter setup?   Sam Morgan
• [Elecraft] Elecraft K3 with K2 as station panadapter setup?   Sam Morgan
• [Elecraft] Elecraft K3 with K2 as station panadapter setup?   Sam Morgan
• [Elecraft] K3 Utility error codes?   Sam Morgan
• [Elecraft] k2 pll and ref osc issues n0xdb   Sam Morgan
• [Elecraft] Elecraft K3 Frequency Memory Editor   Sam Morgan
• [Elecraft] OT: Identify Transistor   Sam Morgan
• [Elecraft] Wow! Nice Knobs :-)   Sam Morgan
• [Elecraft] Wow! Nice Knobs :-)   Sam Morgan
• [Elecraft] Firmware upgrade problem using Elecraft K3 Utility V 1.3.4.3   Sam Morgan
• [Elecraft] Firmware upgrade problem using Elecraft K3 Utility V 1.3.4.3   Sam Morgan
• [Elecraft] K3 option request   Tony Morgan
• [Elecraft] Wow! Nice Knobs :-)   Tony Morgan
• [Elecraft] Elecraft] Wow! Nice Knobs :-)   Tony Morgan
• [Elecraft] Seems to be confusion!   Tony Morgan
• [Elecraft] Older Serial number K3   Roy Morris
• [Elecraft] CONFIG: WMTR Settings   Roy Morris
• [Elecraft] time to order your P3 >>>>   Ed Muns
• [Elecraft] News from Visalia! (:-))   Ed Muns
• [Elecraft] 2.7 vs 2.8   Barry N1EU
• [Elecraft] K3 Notch   N1JM
• [Elecraft] K3 Notch   N1JM
• [Elecraft] K3 Notch   N1JM
• [Elecraft] [K3] K3DSPUPGD or K3DSPLPF   N2TK, Tony
• [Elecraft] K3 as hand luggage   N2TK, Tony
• [Elecraft] K3 Notch   N2TK, Tony
• [Elecraft] External Power Supply for the KPA-500   ANTNEE N3ANT
• [Elecraft] K3 PA Power Loss with Subreceiver Install   N3CAQ
• [Elecraft] time to order your P3 >>>>   Paul at N4LCD.com
• [Elecraft] KPA-500 Question   Dave Perry N4QS
• [Elecraft] internet remote to K3   Tom Azlin N4ZPT
• [Elecraft] Just installed KSUN3!   Radio Amateur N5GE
• [Elecraft] K3 option request   Radio Amateur N5GE
• [Elecraft] EQ per mode?   Radio Amateur N5GE
• [Elecraft] Mea culpa (KPA-500)   Radio Amateur N5GE
• [Elecraft] Usefulness of the the list   Radio Amateur N5GE
• [Elecraft] K3 Beta Firmware ??   Radio Amateur N5GE
• [Elecraft] [K3] CW Sidetone Pitch Change Problem   Radio Amateur N5GE
• [Elecraft] K3 - 15 pin Y   Iain MacDonnell - N6ML
• [Elecraft] Using the 12v OUT Jack   Iain MacDonnell - N6ML
• [Elecraft] remote shut off   Iain MacDonnell - N6ML
• [Elecraft] K3 Programmer's Reference iPhone App Available   Rick Tavan N6XI
• [Elecraft] NAQCC Sprint Tuesday night!   NAQCC
• [Elecraft] time to order your P3 >>>>   Bill NY9H
• [Elecraft] time to order your P3 >>>>   Bill NY9H
• [Elecraft] KPA500   Bill NY9H
• [Elecraft] equalizer   Bill NY9H
• [Elecraft] CM-500 Response (was: Heil HC-4, HC-5)   Bob Naumann
• [Elecraft] K3 and Expert 1K-FA   Bob Naumann
• [Elecraft] K3 and Expert 1K-FA   Bob Naumann
• [Elecraft] K3 and Expert 1K-FA   Bob Naumann
• [Elecraft] N2CQ QRP Contest Caledar: April 2010   Ken Newman
• [Elecraft] N2CQ QRP Contest Calendar: April 20 - May 20, 2010   Ken Newman
• [Elecraft] N2CQ QRP Contest Calendar: May 2010   Ken Newman
• [Elecraft] International Shipping Charges!!??!!   Bob Nielsen
• [Elecraft] K3 power output on SSB   Arthur Nienhouse
• [Elecraft] K3 power output on SSB   Arthur Nienhouse
• [Elecraft] Voice Announcement   Thomas Norff
• [Elecraft] Elecraft K3 Frequency Memory Editor   Thomas Norff
• [Elecraft] EQ per mode?   OE5CSP-Chris
• [Elecraft] [K3] MD3; or MD7; command changes VFO B filter settings   Frank R. Oppedijk
• [Elecraft] 2.7 vs 2.8   Arie Kleingeld PA3A
• [Elecraft] the easy panadapter   Arie Kleingeld PA3A
• [Elecraft] KPA500   Arie Kleingeld PA3A
• [Elecraft] News from Visalia! (:-))   Arie Kleingeld PA3A
• [Elecraft] K3 and Expert 1K-FA   Arie Kleingeld PA3A
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Arie Kleingeld PA3A
• [Elecraft] Anderson Power Pole.   Henk Remijn PA5KT
• [Elecraft] How to pronounce the "/"?   PD2R
• [Elecraft] K3 as hand luggage   Felipe Ceglia - PY1NB
• [Elecraft] K3 as hand luggage   Felipe Ceglia - PY1NB
• [Elecraft] Heil HC-4, HC-5   Hector Padron
• [Elecraft] Heil HC-4, HC-5   Hector Padron
• [Elecraft] CM-500 Response (was: Heil HC-4, HC-5)   Hector Padron
• [Elecraft] 2.7 vs 2.8   Hector Padron
• [Elecraft] My feelings   Hector Padron
• [Elecraft] K3 Memory Manager - MCU 3.94   Hector Padron
• [Elecraft] Beware, Make Sure Your Amp Is In Standby If You Turn On the K3   Hector Padron
• [Elecraft] K3 Replaced Your Pro III?   Hector Padron
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Hector Padron
• [Elecraft] OT Sound Card and USB to Serial Port Hub   Matt Palmer
• [Elecraft] OT Sound Card and USB to Serial Port Hub   Matt Palmer
• [Elecraft] Testing anti-static mats - found one that works   Matt Palmer
• [Elecraft] KPA500 active devices!!   Matt Palmer
• [Elecraft] KPA500   Matt Palmer
• [Elecraft] K3 Programmer's Reference iPhone App Available   Matt Palmer
• [Elecraft] K3 Programmer's Reference iPhone App Available   Matt Palmer
• [Elecraft] CW/CW-REV config option   Ralph Parker
• [Elecraft] CW/CW-REV config option   Ralph Parker
• [Elecraft] Voice Announcement   Toby Pennington
• [Elecraft] Voice Announcement   Toby Pennington
• [Elecraft] Qsk Thumps   Toby Pennington
• [Elecraft] K2: PSK-31 Power Settings   Jon Perelstein
• [Elecraft] K2: PSK-31 Power Settings   Jon Perelstein
• [Elecraft] K2 Power levels.   Pete.Milsom
• [Elecraft] OT WTB Softrock Lite II   Peter
• [Elecraft] Elecraft K3 with K2 as station panadapter, setup?   Larry Phipps
• [Elecraft] LP-PAN and other SDR   Larry Phipps
• [Elecraft] LP-PAN and other SDR   Larry Phipps
• [Elecraft] time to order your P3, design details?   Larry Phipps
• [Elecraft] Older Serial# K3   Joe Planisky
• [Elecraft] K3 Cooling   Joe Planisky
• [Elecraft] K3 Cooling   Joe Planisky
• [Elecraft] K3 power reduction after using TEST mode   Joe Planisky
• [Elecraft] KPA500   Joe Planisky
• [Elecraft] k2 pll and ref osc issues n0xdb   Joe Planisky
• [Elecraft] My goodness!   Joe Planisky
• [Elecraft] KPA500   Joe Planisky
• [Elecraft] My feelings   Joe Planisky
• [Elecraft] KPA500   Joe Planisky
• [Elecraft] K3 RF Gain calibration   Joe Planisky
• [Elecraft] Just got a K1 4 band K1 kit   Rob at Peg Pohorence
• [Elecraft] News from Visalia! (:-))   Terry Posey
• [Elecraft] K3 Cooling   Rick Prather
• [Elecraft] K3 option request   Rick Prather
• [Elecraft] Data Modes Software for Mac   Rick Prather
• [Elecraft] [K3] CW Sidetone Pitch Change Problem   Rick Prather
• [Elecraft] [K3] CW Sidetone Pitch Change Problem   Rick Prather
• [Elecraft] How to pronounce the "/"?   David Pratt
• [Elecraft] Older Serial# K3   David Pratt
• [Elecraft] OT- 60 m band - 5 Mhz   David Pratt
• [Elecraft] K3 power reduction after using TEST mode   David Pratt
• [Elecraft] XV-series Transverters and K3?   David Pratt
• [Elecraft] Wow! Nice Knobs :-) [END OF THREAD]   David Pratt
• [Elecraft] k2 headphone jack   David Pratt
• [Elecraft] Electret microphone wiring   David Pratt
• [Elecraft] My feelings   Alan Price
• [Elecraft] K1 No power out on 2 of 4 bands   K Price
• [Elecraft] K1 No power out on 2 of 4 bands   K Price
• [Elecraft] K1 No power out on 2 of 4 bands   K Price
• [Elecraft] K1 - # 2793 is on the air!   K Price
• [Elecraft] K1 - Moving the range of 40 meters from 7.100 up to 7.125?   K Price
• [Elecraft] KX-1: slightly deaf on 20m   Stephen Prior
• [Elecraft] ERR TXG problem.   David Quental
• [Elecraft] No transmitter gain.   David Quental
• [Elecraft] Another method to calibrate reference oscillator in K3.   David Quental
• [Elecraft] No transmitter gain.   David Quental
• [Elecraft] Another method to calibrate reference oscillator in K3.   David Quental
• [Elecraft] CONFIG: WMTR Settings   David Quental
• [Elecraft] ERR TXG problem - PROBLEM SOLVED.   David Quental
• [Elecraft] Anderson Power Pole.   David Quental
• [Elecraft] trashed COM ports...   John Ragle
• [Elecraft] K3, sound carfds, and PSK (any speed).   John Ragle
• [Elecraft] K3, sound cards and PSK31   John Ragle
• [Elecraft] Older Serial# K3   Don Rasmussen
• [Elecraft] K3 Cooling   Don Rasmussen
• [Elecraft] K3 Cooling   Don Rasmussen
• [Elecraft] OT: The knack   Don Rasmussen
• [Elecraft] OT: FS - OMNI C / Pics   Don Rasmussen
• [Elecraft] OT: FS - OMNI C / Pics   Don Rasmussen
• [Elecraft] OT: FS SCAF-1 Filter Idiom press   Don Rasmussen
• [Elecraft] OT: Need Help with Transistor Substitution ;-)   Don Rasmussen
• [Elecraft] OT: Identify Transistor   Don Rasmussen
• [Elecraft] OT: HT SMA Antenna   Don Rasmussen
• [Elecraft] Wow! Nice Knobs :-)   Don Rasmussen
• [Elecraft] Wow! Nice Knobs :-)   Don Rasmussen
• [Elecraft] OT: Seems to be confusion!   Don Rasmussen
• [Elecraft] K3 Portability   Don Rasmussen
• [Elecraft] K3 Replaced Your Pro III?   Don Rasmussen
• [Elecraft] K3 K2 Spinners   Don Rasmussen
• [Elecraft] K3 K2 Spinners   Don Rasmussen
• [Elecraft] K3 Notch   Don Rasmussen
• [Elecraft] K2 CAT Control   Don Rasmussen
• [Elecraft] OT: Sunspots   Don Rasmussen
• [Elecraft] Elecraft K3 with K2 as station panadapter setup?   David F. Reed
• [Elecraft] P3 shipping status query   David F. Reed
• [Elecraft] K3 KXV3A without Xverters, sub receiver or P3   Jack Regan
• [Elecraft] K3 option request   John E. Reiser
• [Elecraft] Help on a K3/10   Richard
• [Elecraft] K3/10 help !?   Richard
• [Elecraft] OK... what am I missing now?   Cortland Richmond
• [Elecraft] OK... what am I missing now?   Cortland Richmond
• [Elecraft] K1 ,2 filter board needed   Rick/WA6ES
• [Elecraft] K3 - 15 Pin Y-Cable   Ken Roberson
• [Elecraft] K3 - 15 pin Y   Ken Roberson
• [Elecraft] K3 - 15 pin Y-Cable - Thanks info   Ken Roberson
• [Elecraft] K3 Firmware Update.   Dave & Jeanne Robertson
• [Elecraft] K3 Firmware Update.   Dave & Jeanne Robertson
• [Elecraft] Elcraft W2 Sensor Head   Dave & Jeanne Robertson
• [Elecraft] K3 AM   Dave & Jeanne Robertson
• [Elecraft] Elecraft K3 RS232   David Robertson
• [Elecraft] K3 Firmware Update.   David Robertson
• [Elecraft] [Elecraft K3] Serial port test   David Robertson
• [Elecraft] Elecraft W2   David Robertson
• [Elecraft] K3 AM Split Operation   David Robertson
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft CW Net Report for April 4th & 5th, 2010   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft CW Net Report for April 11th & 12th, 2010   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft CW Net Report for April 18th & 19th, 2010   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft CW Net Report for April 25th & 26th, 2010   Kevin Rock
• [Elecraft] disabled controls during TX   Lu Romero
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Lu Romero
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Lu Romero
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Lu Romero
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Lu Romero
• [Elecraft] News from Visalia! (:-))   Luis V. Romero
• [Elecraft] : Re: News from Visalia! (:-))   Luis V. Romero
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Luis V. Romero
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Luis V. Romero
• [Elecraft] How to pronounce the "/"?   Maarten van Rossum
• [Elecraft] Elecraft SSB Net Announcement   Maarten van Rossum
• [Elecraft] K3 Split option idea   Ted Roycraft
• [Elecraft] K3 option request   Ted Roycraft
• [Elecraft] K3 option request   Ted Roycraft
• [Elecraft] K3 option request   Ted Roycraft
• [Elecraft] K3 option request   Ted Roycraft
• [Elecraft] Ten Tec never sounded so good!   Ted Roycraft
• [Elecraft] time to order your P3, design details?   Ted Roycraft
• [Elecraft] SUB Rcv'r - 'USE AUX' message   Ted Roycraft
• [Elecraft] CW/CW-REV config option   Ted Roycraft
• [Elecraft] K3 Beta Firmware ??   Russo, John
• [Elecraft] KPA500 active devices!!   S Sacco
• [Elecraft] K3 birdies   S Sacco
• [Elecraft] News from Visalia! (:-))   Phil & Debbie Salas
• [Elecraft] News from Visalia!   Phil & Debbie Salas
• [Elecraft] K3 and Expert 1K-FA   Phil & Debbie Salas
• [Elecraft] K1 - # 2793 is on the air!   Sandy
• [Elecraft] Just got a K1 4 band K1 kit   Sandy
• [Elecraft] [K3] 1.0 Milliwatt Calibration   Tony Scesny
• [Elecraft] N0SS' KPAIO3 Puller - Updated   Terry Schieler
• [Elecraft] Seems to be confusion!   Terry Schieler
• [Elecraft] PR6 6 Meter Preamp Installation   Terry Schieler
• [Elecraft] PR6 6 Meter Preamp Installation   Terry Schieler
• [Elecraft] Fw: PR6 6 Meter Preamp Installation   Terry Schieler
• [Elecraft] K3 Filters looking for.   Merv Schweigert
• [Elecraft] Snap-On Ferrites and RF Noise On 160M   Merv Schweigert
• [Elecraft] [K3] Ferrite beads on TMP cables   Mike Scott
• [Elecraft] K3 KXV3A without Xverters, sub receiver or P3   Mike Scott
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Mike Scott
• [Elecraft] Mac OS X and K3 Utility Opinions?   John Seney
• [Elecraft] K1-where to start   Byron Servies
• [Elecraft] K2: K2KSB2XTLS installation question   John Shadle
• [Elecraft] K3 dumb Q about PPM, less dumb one about NB   Garry Shapiro
• [Elecraft] K3 dumb Q about PPM, less dumb one about NB   Garry Shapiro
• [Elecraft] K3 dumb Q about PPM, less dumb one about NB   Garry Shapiro
• [Elecraft] 2.7 vs 2.8   Garry Shapiro
• [Elecraft] 2.7 vs 2.8   Garry Shapiro
• [Elecraft] News from Visalia! (:-))   Garry Shapiro
• [Elecraft] Elecraft SSB Net Announcement   Phil Shepard
• [Elecraft] Elecraft SSB Net Announcement   Phil Shepard
• [Elecraft] Elecraft SSB Net Announcement   Phillip Shepard
• [Elecraft] Elecraft SSB Net results (4-4-10)   Phillip Shepard
• [Elecraft] Elecraft SSB net results (4-11-10)   Phillip Shepard
• [Elecraft] Elecraft SSB net results (4-18-10)   Phillip Shepard
• [Elecraft] Elecraft SSB Net Announcement   Phillip Shepard
• [Elecraft] Elecraft SSB net results (4-25-10)   Phillip Shepard
• [Elecraft] FW: P3 order form   Mike Short
• [Elecraft] [K3] Line in / out socket failure   Mike Short
• [Elecraft] AFSK in DATA A mode   Monty Shultes
• [Elecraft] News from Visalia!   Monty Shultes
• [Elecraft] [K3] Line in / out socket failure   Monty Shultes
• [Elecraft] [K3] Line in / out socket failure   Monty Shultes
• [Elecraft] K3 Programmer's Reference iPhone App Available   Monty Shultes
• [Elecraft] Using "Buddi Pole" Deluxe Antenna with K3   Jay Sissom
• [Elecraft] Using "Buddi Pole" Deluxe Antenna with K3   Jay Sissom
• [Elecraft] Using "Buddi Pole" Deluxe Antenna with K3   Jay Sissom
• [Elecraft] P3   Jay Sissom
• [Elecraft] FS: KX1 & K1   Jay Sissom
• [Elecraft] FS: KX1 & K1   Jay Sissom
• [Elecraft] OT- 60 m band - 5 Mhz   Johnny Siu
• [Elecraft] Re： K2 S/N 05143 is on the air!   Johnny Siu
• [Elecraft] Re： 2.7 vs 2.8   Johnny Siu
• [Elecraft] Re： News from Visalia! (:-))   Johnny Siu
• [Elecraft] News from Visalia! (:-))   Johnny Siu
• [Elecraft] Re： XV-series Transverters and K3?   Johnny Siu
• [Elecraft] Re： K3 Replaced Your Pro III?   Johnny Siu
• [Elecraft] Re： K3 Replaced Your Pro III?   Johnny Siu
• [Elecraft] Re： International Shipping Charges !!??!!   Johnny Siu
• [Elecraft] Older Serial# K3   Gary Slagel
• [Elecraft] Older Serial# K3 - Thanks for comments.   Gary Slagel
• [Elecraft] multi port usb hub and k3 KUSB   Gary Slagel
• [Elecraft] multi port usb hub and k3 KUSB   Gary Slagel
• [Elecraft] KX1 #2374 On the air.   Gary Slagel
• [Elecraft] K2 Encoder problems continue.   Nidge (Nigel Smith)
• [Elecraft] K2 Encoder problems continue.   Nidge (Nigel Smith)
• [Elecraft] K2 filter alignment   Nidge (Nigel Smith)
• [Elecraft] K2 filter alignment   Nidge (Nigel Smith)
• [Elecraft] International Shipping Charges !!??!!   Nidge (Nigel Smith)
• [Elecraft] International Shipping Charges!!??!!   Nidge (Nigel Smith)
• [Elecraft] News from Visalia! (:-))   Craig D. Smith
• [Elecraft] K2 VFO / Encoder Problem   Nigel (Nidge) Smith
• [Elecraft] K2 VFO / Encoder Problem   Nigel (Nidge) Smith
• [Elecraft] K2 VFO / Encoder Problem   Nigel (Nidge) Smith
• [Elecraft] K2 Encoder problems continue.   Nigel (Nidge) Smith
• [Elecraft] time to order your P3 >>>>   Trevor Smithers
• [Elecraft] k2 pll and ref osc issues n0xdb   The Smiths
• [Elecraft] Don   The Smiths
• [Elecraft] My feelings   The Smiths
• [Elecraft] FW: QSK THUMPS?   The Smiths
• [Elecraft] QSK THUMPS?   The Smiths
• [Elecraft] Reality check on KX-1 initial rcvr adjustments   Peter N. Spotts
• [Elecraft] Thanks, Elecraft, for the KX-1   Peter N. Spotts
• [Elecraft] Question on the BL2 with the KX-1   Peter N. Spotts
• [Elecraft] Knob?   Roger Stein
• [Elecraft] Elecraft K2   L. T. Stem
• [Elecraft] K2AV Comments RE: W3FPR   L. T. Stem
• [Elecraft] Heil Traveler Headset w/K2??   Steve_wG0AT
• [Elecraft] Heil Traveler Headset w/K2??   Steve_wG0AT
• [Elecraft] Stroke or Slash   Stewart
• [Elecraft] [K3] Line in / out socket failure   Stewart
• [Elecraft] [K3] Line in / out socket failure   Stewart
• [Elecraft] K3 - Performance on 6M?   Wes Stewart
• [Elecraft] Older Serial# K3   Wes Stewart
• [Elecraft] K3, sound cards and PSK31   Wes Stewart
• [Elecraft] K3 option request   Wes Stewart
• [Elecraft] K3 option request   Wes Stewart
• [Elecraft] Ten Tec never sounded so good!   Wes Stewart
• [Elecraft] [OT]: Antenna Tuners - one more reason   Wes Stewart
• [Elecraft] time to order your P3 >>>>   Wes Stewart
• [Elecraft] Ten Tec never sounded so good!   Wes Stewart
• [Elecraft] News from Visalia! (:-))   Wes Stewart
• [Elecraft] RTTY using DATA mode on K3   Wes Stewart
• [Elecraft] News from Visalia!   Wes Stewart
• [Elecraft] Good photos of KPA500   Wes Stewart
• [Elecraft] K3 birdies   Wes Stewart
• [Elecraft] P3 Information Page now on Elecraft Web Page   Wes Stewart
• [Elecraft] External Power Supply for the KPA-500   Wes Stewart
• [Elecraft] KPA-500; meets many needs   Wes Stewart
• [Elecraft] K3 and Expert 1K-FA   Wes Stewart
• [Elecraft] K3 + RTTY   Wes Stewart
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Wes Stewart
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Wes Stewart
• [Elecraft] Usefulness of the the list   Wes Stewart
• [Elecraft] K3 birdies   Wes Stewart
• [Elecraft] K3 Notch   Wes Stewart
• [Elecraft] DC-supply for a preamp?   Wes Stewart
• [Elecraft] K3: Driving Data Modes Using Dell Dimension 8400   Wes Stewart
• [Elecraft] P3   Kevin Stover
• [Elecraft] Elecraft K2   Robert G. Strickland
• [Elecraft] KPA-500 Question   Eric Swartz
• [Elecraft] KPA500   Richard Thorne
• [Elecraft] News from Visalia!   Richard Thorne
• [Elecraft] [K3] Firmware Update via K3 USB Utility   George A. Thornton
• [Elecraft] K3 dumb Q about PPM, less dumb one about NB   George A. Thornton
• [Elecraft] K3, sound cards and PSK31   George A. Thornton
• [Elecraft] K3, sound cards and PSK31   George A. Thornton
• [Elecraft] Using "Buddi Pole" Deluxe Antenna with K3   George A. Thornton
• [Elecraft] PSK31 setup   George A. Thornton
• [Elecraft] PSK31 setup   George A. Thornton
• [Elecraft] 12 volt PA   George A. Thornton
• [Elecraft] K3: Driving Data Modes Using Dell Dimension 8400   George A. Thornton
• [Elecraft] P3   Richard Thorpe
• [Elecraft] Data Modes Software for Mac   Tom, DL2RUM
• [Elecraft] K3 1mW Calibration problem.   Glen Torr
• [Elecraft] K3 1 mW calibration problem   Glen Torr
• [Elecraft] World Amateur Radio Day   Philippe Trottet
• [Elecraft] K3 and Expert 1K-FA   Philippe Trottet
• [Elecraft] K3 and Expert 1K-FA   Philippe Trottet
• [Elecraft] Wow! Nice Knobs :-)   Philippe Trottet
• [Elecraft] Elecraft SSB net results (4-25-10)   Philippe Trottet
• [Elecraft] P3   Doug Turnbull
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Doug Turnbull
• [Elecraft] Wow! Nice Knobs :-)   Doug Turnbull
• [Elecraft] K3 KXV3-RXA Mod   VE3NFK
• [Elecraft] K3 KXV3-RXA Mod   VE3NFK
• [Elecraft] P3 and KPA500 Photos   Tony Fegan VE3QF
• [Elecraft] K3 - 2 x Ant sockets without the ATU?   Jeff Cochrane - VK4BOF
• [Elecraft] K3 - Performance on 6M?   Jeff Cochrane - VK4BOF
• [Elecraft] K3 - Performance on 6M?   Jeff Cochrane - VK4BOF
• [Elecraft] K3 - Performance on 6M?   Jeff Cochrane - VK4BOF
• [Elecraft] CW/CW-REV config option   Jeff Cochrane - VK4BOF
• [Elecraft] K3 not turning off   Glenn VK4FZ
• [Elecraft] K3 not turning off   Glenn VK4FZ
• [Elecraft] K3 Notch   Val
• [Elecraft] K2 full power delay on CW   Vic, K2VCO
• [Elecraft] K3 option request   W0FK
• [Elecraft] K3 - INRAD 1500Hz filters are back in stock.   Bob - W0GI
• [Elecraft] remote shut off   W2XB
• [Elecraft] remote ON/OFF   W2XB
• [Elecraft] Remote success   W2XB
• [Elecraft] remote   W2XB
• [Elecraft] RES: [K3] K3DSPUPGD   John W2XS
• [Elecraft] time to order your P3 >>>>   W4CCS
• [Elecraft] External Power Supply for the KPA-500   W4GRJ
• [Elecraft] K3 and Expert 1K-FA   W4GRJ
• [Elecraft] SUB Rcv'r - 'USE AUX' message   W4GRJ
• [Elecraft] K3 KXV3A without Xverters, sub receiver or P3   Bill W4ZV
• [Elecraft] QRP, Portable, and Compromise Antennas   Bill W4ZV
• [Elecraft] time to order your P3 >>>>   Bill W4ZV
• [Elecraft] News from Visalia! (:-))   Bill W4ZV
• [Elecraft] CONFIG: WMTR Settings   Bill W4ZV
• [Elecraft] Voice Announcement   Bill W4ZV
• [Elecraft] K3 Replaced Your Pro III?   Bill W4ZV
• [Elecraft] K3 not turning off   Bill W4ZV
• [Elecraft] [K3] CW Sidetone Pitch Change Problem   Bill W4ZV
• [Elecraft] [K3] CW Sidetone Pitch Change Problem   Bill W4ZV
• [Elecraft] KDSP2 F/S or trade   Mark - W5EZY
• [Elecraft] My feelings   Mark - W5EZY
• [Elecraft] Loss of normal LIN OUT functionality   Bill VanAlstyne W5WVO
• [Elecraft] K3 - Performance on 6M?   Bill VanAlstyne W5WVO
• [Elecraft] New Guy   Bill VanAlstyne W5WVO
• [Elecraft] 2.7 vs 2.8   Bill VanAlstyne W5WVO
• [Elecraft] KAT3 kit documentation   Bill VanAlstyne W5WVO
• [Elecraft] Why manual setting for FLTX?   Bill VanAlstyne W5WVO
• [Elecraft] Why manual setting for FLTX?   Bill VanAlstyne W5WVO
• [Elecraft] RTTY using DATA mode on K3   Bill VanAlstyne W5WVO
• [Elecraft] RTTY using DATA mode on K3   Bill VanAlstyne W5WVO
• [Elecraft] In Reference to: k2 pll and ref osc issues n0xdb   Bill VanAlstyne W5WVO
• [Elecraft] K3 - KPAIO3 'Puller'   Bill VanAlstyne W5WVO
• [Elecraft] K3 birdies   Bill VanAlstyne W5WVO
• [Elecraft] Wow! Nice Knobs :-)   Bill VanAlstyne W5WVO
• [Elecraft] Seems to be confusion!   Bill VanAlstyne W5WVO
• [Elecraft] ERR 12V on K3   Bill VanAlstyne W5WVO
• [Elecraft] K3 option request   W6NEK
• [Elecraft] K3 Keying Up For A Split Second When Power Button IsPushed   Tom W8JI
• [Elecraft] K3 Keying Up For A Split Second When Power ButtonIs Pushed   Tom W8JI
• [Elecraft] K3 Keying Up For A Split Second When Power Button, IsPushed (Tom W8JI)   Tom W8JI
• [Elecraft] K3 keying at turn-on   Tom W8JI
• [Elecraft] K3 - Performance on 6M?   Tom W8JI
• [Elecraft] K3 Cooling   Tom W8JI
• [Elecraft] K3 Cooling   Tom W8JI
• [Elecraft] Using "Buddi Pole" Deluxe Antenna with K3   Tom W8JI
• [Elecraft] Second receiver options ??   Tom W8JI
• [Elecraft] 2.7 vs 2.8   Tom W8JI
• [Elecraft] Ten Tec never sounded so good!   Tom W8JI
• [Elecraft] [OT]: Antenna Tuners - one more reason   Tom W8JI
• [Elecraft] KPA500 active devices!!   Tom W8JI
• [Elecraft] KPA500 active devices!!   Tom W8JI
• [Elecraft] Grounding negative side of power supply?   Tom W8JI
• [Elecraft] News from Visalia!   Tom W8JI
• [Elecraft] KPA500   Tom W8JI
• [Elecraft] KPA500` (flux leakage)   Tom W8JI
• [Elecraft] Grounding negative side of power supply?   Tom W8JI
• [Elecraft] K3 birdies   Tom W8JI
• [Elecraft] K3 birdies   Tom W8JI
• [Elecraft] Grounding negative side of power supply?   Tom W8JI
• [Elecraft] K3 and Expert 1K-FA   Tom W8JI
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Tom W8JI
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Tom W8JI
• [Elecraft] K3 - SPE Expert 1K-FA and ALC   Tom W8JI
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Tom W8JI
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   Tom W8JI
• [Elecraft] Wow! Nice Knobs :-)   Tom W8JI
• [Elecraft] KPA500   Tom W8JI
• [Elecraft] Electret microphone wiring   Tom W8JI
• [Elecraft] Electret microphone wiring   Tom W8JI
• [Elecraft] Beware, Make Sure Your Amp Is In Standby If You Turn On the K3   Tom W8JI
• [Elecraft] k2 headphone jack   Tom W8JI
• [Elecraft] K3 Notch   Tom W8JI
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Tom W8JI
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Tom W8JI
• [Elecraft] WANTED - KXPD1 paddle   Ken - WA4SQM
• [Elecraft] PR6 6 meter antenna connections   Gil WA5YKK
• [Elecraft] Using "Buddi Pole" Deluxe Antenna with K3   Leigh L. Klotz Jr WA5ZNU
• [Elecraft] K3 Speaker toggle macro   Leigh L. Klotz Jr WA5ZNU
• [Elecraft] KPA500   Mike WA8BXN
• [Elecraft] at1 attenuator questions   Mike WA8BXN
• [Elecraft] Remotable external tuner   WB5BKL
• [Elecraft] tuning range 80 khz or 150 khz?   WB8ENE
• [Elecraft] Seems to be confusion!   Philip Leonard WVØT
• [Elecraft] Seems to be confusion!   Philip Leonard WVØT
• [Elecraft] voltage drop   Dennis Watkins
• [Elecraft] power   Dennis Watkins
• [Elecraft] FS: K2 plus many options for sale.   Paul Webb
• [Elecraft] FS: K2 Full of Options for Sale   Paul Webb
• [Elecraft] K3 for sale   Peter Wierach
• [Elecraft] k2 assembly tilt stand   Alan D. Wilcox
• [Elecraft] K1-where to start   Alan D. Wilcox
• [Elecraft] K1-where to start   Alan D. Wilcox
• [Elecraft] K3 Replaced Your Pro III?   Alan D. Wilcox
• [Elecraft] Re： K3 Replaced Your Pro III?   Alan D. Wilcox
• [Elecraft] Pro3 Going, K3 Coming!   Alan D. Wilcox
• [Elecraft] K3 dumb Q about PPM, less dumb one about NB   Jim Wiley
• [Elecraft] OT- 60 m band - 5 Mhz   Jim Wiley
• [Elecraft] K2 Pwr Out Problems   Don Wilhelm
• [Elecraft] K3 dumb Q about PPM, less dumb one about NB   Don Wilhelm
• [Elecraft] Just installed KSUN3!   Don Wilhelm
• [Elecraft] K1 No power out on 2 of 4 bands   Don Wilhelm
• [Elecraft] [K3] Firmware Update via K3 USB Utility   Don Wilhelm
• [Elecraft] K1 Front Panel resistance checks   Don Wilhelm
• [Elecraft] K3 - 2 x Ant sockets without the ATU?   Don Wilhelm
• [Elecraft] BCD voltage   Don Wilhelm
• [Elecraft] k2 assembly question   Don Wilhelm
• [Elecraft] KD9SV DXPedition II and diversity   Don Wilhelm
• [Elecraft] K1 No power out on 2 of 4 bands   Don Wilhelm
• [Elecraft] k2 assembly next question.   Don Wilhelm
• [Elecraft] Just installed KSUN3!   Don Wilhelm
• [Elecraft] How to pronounce the "/"?   Don Wilhelm
• [Elecraft] K3 dumb Q about PPM, less dumb one about NB   Don Wilhelm
• [Elecraft] k2 rf assembly part 1 question pg 35   Don Wilhelm
• [Elecraft] K2: K2KSB2XTLS installation question   Don Wilhelm
• [Elecraft] K3 Firmware Update.   Don Wilhelm
• [Elecraft] K2 Power levels.   Don Wilhelm
• [Elecraft] K2 low power   Don Wilhelm
• [Elecraft] Older Serial# K3   Don Wilhelm
• [Elecraft] K3 Utility problem   Don Wilhelm
• [Elecraft] K3 Cooling   Don Wilhelm
• [Elecraft] k2 assembly tilt stand   Don Wilhelm
• [Elecraft] K3 PA Power Loss with Subreceiver Install   Don Wilhelm
• [Elecraft] K3, sound cards and PSK31   Don Wilhelm
• [Elecraft] K3 Cooling   Don Wilhelm
• [Elecraft] sound card recommendations   Don Wilhelm
• [Elecraft] K3 Cooling   Don Wilhelm
• [Elecraft] Elecraft K3 with K2 as station panadapter setup?   Don Wilhelm
• [Elecraft] K1 test supplies   Don Wilhelm
• [Elecraft] K3 KXV3-RXA Mod   Don Wilhelm
• [Elecraft] K2 VFO / Encoder Problem   Don Wilhelm
• [Elecraft] K2 VFO / Encoder Problem   Don Wilhelm
• [Elecraft] K2 dead   Don Wilhelm
• [Elecraft] K3 KXV3-RXA Mod   Don Wilhelm
• [Elecraft] PSK31 setup   Don Wilhelm
• [Elecraft] K CW-to-data wierdness   Don Wilhelm
• [Elecraft] OT: Up two ?   Don Wilhelm
• [Elecraft] K3 KAT3 forgets settings   Don Wilhelm
• [Elecraft] K3 KAT3 forgets settings   Don Wilhelm
• [Elecraft] 2.7 vs 2.8   Don Wilhelm
• [Elecraft] K1-where to start   Don Wilhelm
• [Elecraft] K1-where to start   Don Wilhelm
• [Elecraft] Future KX1 owner   Don Wilhelm
• [Elecraft] Ten Tec never sounded so good!   Don Wilhelm
• [Elecraft] Ten Tec never sounded so good!   Don Wilhelm
• [Elecraft] Ten Tec never sounded so good!   Don Wilhelm
• [Elecraft] Ten Tec never sounded so good!   Don Wilhelm
• [Elecraft] time to order your P3, design details?   Don Wilhelm
• [Elecraft] time to order your P3, design details?   Don Wilhelm
• [Elecraft] time to order your P3, design details?   Don Wilhelm
• [Elecraft] KPA500   Don Wilhelm
• [Elecraft] P3   Don Wilhelm
• [Elecraft] KPA500   Don Wilhelm
• [Elecraft] K3 600Hz shift when A/B pressed (cw/ssb)   Don Wilhelm
• [Elecraft] K1 LED backlight anode annotation   Don Wilhelm
• [Elecraft] K2 Encoder problems continue.   Don Wilhelm
• [Elecraft] K2 filter alignment   Don Wilhelm
• [Elecraft] K2 filter alignment   Don Wilhelm
• [Elecraft] k2 pll and ref osc issues n0xdb   Don Wilhelm
• [Elecraft] k2 pll and ref osc issues n0xdb   Don Wilhelm
• [Elecraft] K2 Encoder problems continue.   Don Wilhelm
• [Elecraft] K3 button problem question   Don Wilhelm
• [Elecraft] k2 pll and ref osc issues n0xdb   Don Wilhelm
• [Elecraft] k2 pll and ref osc issues n0xdb   Don Wilhelm
• [Elecraft] K3: Driving Data Modes Using Dell Dimension 8400   Don Wilhelm
• [Elecraft] K2: PSK-31 Power Settings   Don Wilhelm
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Don Wilhelm
• [Elecraft] K2: PSK-31 Power Settings   Don Wilhelm
• [Elecraft] K2: PSK-31 Power Settings   Don Wilhelm
• [Elecraft] K2: PSK-31 Power Settings   Don Wilhelm
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Don Wilhelm
• [Elecraft] K2: PSK-31 Power Settings   Don Wilhelm
• [Elecraft] CW/CW-REV config option   Don Wilhelm
• [Elecraft] CW/CW-REV config option   Don Wilhelm
• [Elecraft] CW/CW-REV config option   Don Wilhelm
• [Elecraft] tuning range 80 khz or 150 khz?   Don Wilhelm
• [Elecraft] k2 need transmitt trouble help from N0XDB Joe   Don Wilhelm
• [Elecraft] K1 - Moving the range of 40 meters from 7.100 up to 7.125?   Don Wilhelm
• [Elecraft] Question on the BL2 with the KX-1   Don Wilhelm
• [Elecraft] K3 AGC changes from SLOW to FAST on scan/stop transition   David Windisch
• [Elecraft] K3 AGC changes from SLOW to FAST on scan/stop transition   David Windisch
• [Elecraft] K3 AGC changes from SLOW to FAST on scan/stop transition   David Windisch
• [Elecraft] K3: Mike input no longer works.   Donald Wines
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   Andy Wood
• [Elecraft] K3 dumb Q about PPM, less dumb one about NB   David Woolley
• [Elecraft] RS232 connectivity P3/KPA500   Craig WØLV
• [Elecraft] K2 low power   Conway Yee
• [Elecraft] Older Serial# K3   Grant Youngman
• [Elecraft] K3 Cooling   Grant Youngman
• [Elecraft] 12 volt PA   Grant Youngman
• [Elecraft] time to order your P3 >>>>   Grant Youngman
• [Elecraft] KPA500   Grant Youngman
• [Elecraft] News from Visalia! (:-))   Grant Youngman
• [Elecraft] K3/10 w/ sub current draw?   Matt Zilmer
• [Elecraft] [K3] P3 and hardware updates   Matt Zilmer
• [Elecraft] Strange problem last night in my K3   Matt Zilmer
• [Elecraft] [K3] Ferrite beads on TMP cables   Matthew Zilmer
• [Elecraft] K3 Split option idea   Richard Zwirko
• [Elecraft] Second receiver options ??   Richard Zwirko
• [Elecraft] Elecraft Digest, Vol 72, Issue 18   Len [K4IWL]
• [Elecraft] K1 Where to start.   Len [K4IWL]
• [Elecraft] test   je1trv at a1club.net
• [Elecraft] KPA500   ab2tc
• [Elecraft] News from Visalia! (:-))   ab2tc
• [Elecraft] News from Visalia! (:-))   ab2tc
• [Elecraft] k2 pll and ref osc issues n0xdb   ab2tc
• [Elecraft] Wow! Nice Knobs :-)   ab2tc
• [Elecraft] K3 RF Gain calibration   ab2tc
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   ab2tc
• [Elecraft] K3 Notch   ab2tc
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   ab2tc
• [Elecraft] W2IHY 8 band equalizer and EQ Plus   ab2tc
• [Elecraft] K3 Notch   ab2tc
• [Elecraft] Stroke or Slash   alan
• [Elecraft] N1MM & K3   K4IA at aol.com
• [Elecraft] K-3 Display Brightness   RLVZ at aol.com
• [Elecraft] (no subject)   W0WOI at aol.com
• [Elecraft] FS: LP-PAN (K3 version) & E-MU 0202   W0WOI at aol.com
• [Elecraft] SOLD: LP-PAN and E-MU 0202 Package   W0WOI at aol.com
• [Elecraft] K2 dead   W2bpi1 at aol.com
• [Elecraft] KPA500 AMP Frequency Coverage   W3cmp at aol.com
• [Elecraft] KPA500 Option Request   k4tmc at aol.com
• [Elecraft] time to order your P3, design details?   sfbonk at aol.com
• [Elecraft] KPA-500; meets many needs   ynkedragon at aol.com
• [Elecraft] Mea culpa (KPA-500)   ynkedragon at aol.com
• [Elecraft] Strange things a happening   Telegrapher at att.net
• [Elecraft] K3 Keying Up For A Split Second When Power Button Is Pushed   gary bartlett
• [Elecraft] K3 Notch   gary bartlett
• [Elecraft] K3 Notch   gary bartlett
• [Elecraft] K3 Notch   gary bartlett
• [Elecraft] disabled controls during TX   k6rb at baymoon.com
• [Elecraft] How to pronounce the "/"?   k6rb at baymoon.com
• [Elecraft] sound card recommendations   k6rb at baymoon.com
• [Elecraft] K3 Replaced Your Pro III?   Jim bennett
• [Elecraft] K3 Replaced Your Pro III?   Jim bennett
• [Elecraft] International Shipping Charges!!??!!   Jim bennett
• [Elecraft] International Shipping Charges!!??!!   Jim bennett
• [Elecraft] Pro3 Going, K3 Coming!   Jim bennett
• [Elecraft] Mac OS X and K3 Utility Opinions?   Jim bennett
• [Elecraft] Mac OS X and K3 Utility Opinions?   Jim bennett
• [Elecraft] ELECRAFT K3 & SG 500 AMPLIFIER   bill wade, sr.
• [Elecraft] Grounding negative side of power supply?   briana
• [Elecraft] [K3] CW Sidetone Pitch Change Problem   briana
• [Elecraft] Peak SSB Output vs. "Tune" output   brian at brianlinn.com
• [Elecraft] News from Visalia!   n4cc at cableone.net
• [Elecraft] Second receiver options ??   callen1155
• [Elecraft] Second receiver options ??   callen1155
• [Elecraft] N1MM & K3   dalspaugh at comcast.net
• [Elecraft] Peak SSB Output vs. "Tune" output   dalspaugh at comcast.net
• [Elecraft] K1 test supplies   ki4bbl at cox.net
• [Elecraft] Woohoo, I can start!   ki4bbl at cox.net
• [Elecraft] K1-where to start   ki4bbl at cox.net
• [Elecraft] TX IMD problem   chen dave
• [Elecraft] TX IMD problem   chen dave
• [Elecraft] K-3 Display Brightness   drewko
• [Elecraft] k2 headphone jack   drewko
• [Elecraft] KPA500 active devices!!   elecraft at g4fre.com
• [Elecraft] P3 color selection (was Re: time to order your P3, design details?)   dave.wilburn at gmail.com
• [Elecraft] attenuator in amp was Re: K3 and Expert 1K-FA   dave.wilburn at gmail.com
• [Elecraft] EQ per mode?   rfenabled at gmail.com
• [Elecraft] disabled controls during TX   jeff herr
• [Elecraft] K1 Front Panel resistance checks   egernet at hushmail.com
• [Elecraft] K1 Front Panel resistance checks   egernet at hushmail.com
• [Elecraft] No transmitter gain.   john
• [Elecraft] Ten Tec never sounded so good!   juergen
• [Elecraft] time to order your P3, design details?   juergen
• [Elecraft] KPA500   juergen
• [Elecraft] Ten Tec never sounded so good!   juergen
• [Elecraft] KPA500   juergen
• [Elecraft] KPA500 active devices!!   juergen
• [Elecraft] KPA500 active devices!!   juergen
• [Elecraft] K3:Beta 3.94 filter selection bug?   juergen
• [Elecraft] P3 Information Page now on Elecraft Web Page   k6osx
• [Elecraft] KX1 #2374 On the air.   k6tt
• [Elecraft] Knobs for the K3   k9sd
• [Elecraft] K1-where to start   ki4bbl
• [Elecraft] K1-where to start   ki4bbl
• [Elecraft] K1 LED backlight anode annotation   ki4bbl
• [Elecraft] K1-Something interesting about the inventory   ki4bbl
• [Elecraft] K1 LED backlight anode annotation   ki4bbl
• [Elecraft] K1-Something interesting about the inventory   ki4bbl
• [Elecraft] tuning range 80 khz or 150 khz?   ki4bbl
• [Elecraft] tuning range 80 khz or 150 khz?   ki4bbl
• [Elecraft] K3 Portability   knesbitt
• [Elecraft] K3 + RTTY   giuseppesolimano at libero.it
• [Elecraft] K3 dumb Q about PPM, less dumb one about NB   lstavenhagen
• [Elecraft] K3 dumb Q about PPM, less dumb one about NB   lstavenhagen
• [Elecraft] K3 dumb Q about PPM, less dumb one about NB   lstavenhagen
• [Elecraft] K3 dumb Q about PPM   lstavenhagen
• [Elecraft] k2 assembly question   lstavenhagen
• [Elecraft] k2 assembly lcd   lstavenhagen
• [Elecraft] joke   lstavenhagen
• [Elecraft] k2 assembly next question.   lstavenhagen
• [Elecraft] How to pronounce the "/"?   lstavenhagen
• [Elecraft] Elecraft K2   lstavenhagen
• [Elecraft] Your K2 Questions   lstavenhagen
• [Elecraft] K3 PSK-D sidetone pitch - adjustable?   lstavenhagen
• [Elecraft] K3, sound cards and PSK31   lstavenhagen
• [Elecraft] blinking SPLIT icon   lstavenhagen
• [Elecraft] K3 Cooling   lstavenhagen
• [Elecraft] 64 bit prolific driver for Snow Leopard   lstavenhagen
• [Elecraft] 64 bit prolific driver for Snow Leopard   lstavenhagen
• [Elecraft] Using "Buddi Pole" Deluxe Antenna with K3   lstavenhagen
• [Elecraft] K3: latest Prolific drivers for the KUSB   lstavenhagen
• [Elecraft] Prolific drivers and Mac OS   lstavenhagen
• [Elecraft] Prolific drivers and Mac OS   lstavenhagen
• [Elecraft] K CW-to-data wierdness   lstavenhagen
• [Elecraft] Prolific drivers and Mac OS   lstavenhagen
• [Elecraft] K CW-to-data wierdness   lstavenhagen
• [Elecraft] RTTY and best IMD, cooling, etc   lstavenhagen
• [Elecraft] K3 option request   lstavenhagen
• [Elecraft] K3 option request   lstavenhagen
• [Elecraft] K3 option request   lstavenhagen
• [Elecraft] K3 option request   lstavenhagen
• [Elecraft] 2.7 vs 2.8   lstavenhagen
• [Elecraft] K3 KAT3 forgets settings   lstavenhagen
• [Elecraft] K3 KAT3 forgets settings   lstavenhagen
• [Elecraft] K3 KAT3 forgets settings   lstavenhagen
• [Elecraft] K3 KAT3 forgets settings   lstavenhagen
• [Elecraft] K3 KAT3 forgets settings   lstavenhagen
• [Elecraft] K1-where to start   lstavenhagen
• [Elecraft] Ten Tec never sounded so good!   lstavenhagen
• [Elecraft] Ten Tec never sounded so good!   lstavenhagen
• [Elecraft] Ten Tec never sounded so good!   lstavenhagen
• [Elecraft] time to order your P3, design details?   lstavenhagen
• [Elecraft] time to order your P3, design details?   lstavenhagen
• [Elecraft] time to order your P3, design details?   lstavenhagen
• [Elecraft] time to order your P3, design details?   lstavenhagen
• [Elecraft] News from Visalia! (:-))   lstavenhagen
• [Elecraft] News from Visalia! (:-))   lstavenhagen
• [Elecraft] P3   lstavenhagen
• [Elecraft] P3   lstavenhagen
• [Elecraft] P3   lstavenhagen
• [Elecraft] P3   lstavenhagen
• [Elecraft] P3   lstavenhagen
• [Elecraft] k2 pll and ref osc issues n0xdb   lstavenhagen
• [Elecraft] k2 pll and ref osc issues n0xdb   lstavenhagen
• [Elecraft] KAT3 kit documentation   lstavenhagen
• [Elecraft] k2 pll and ref osc issues n0xdb   lstavenhagen
• [Elecraft] KPA500 - A bit more info   lstavenhagen
• [Elecraft] P3   lstavenhagen
• [Elecraft] P3   lstavenhagen
• [Elecraft] Good photos of KPA500   lstavenhagen
• [Elecraft] K3 birdies   lstavenhagen
• [Elecraft] Wow! Nice Knobs :-)   lstavenhagen
• [Elecraft] K3 Portability   lstavenhagen
• [Elecraft] Usefulness of the the list   lstavenhagen
• [Elecraft] K3 Beta Firmware ??   lstavenhagen
• [Elecraft] K3 birdies   lstavenhagen
• [Elecraft] K3 Replaced Your Pro III?   lstavenhagen
• [Elecraft] K3 birdies   lstavenhagen
• [Elecraft] K3 Replaced Your Pro III?   lstavenhagen
• [Elecraft] Data Modes Software for Mac   lstavenhagen
• [Elecraft] QSK THUMPS?   lstavenhagen
• [Elecraft] Data Modes Software for Mac   lstavenhagen
• [Elecraft] Pro3 Going, K3 Coming!   lstavenhagen
• [Elecraft] K3 Programmer's Reference iPhone App Available   lstavenhagen
• [Elecraft] K3 Programmer's Reference iPhone App Available   lstavenhagen
• [Elecraft] CW/CW-REV config option   lstavenhagen
• [Elecraft] CW/CW-REV config option   lstavenhagen
• [Elecraft] Mac OS X and K3 Utility Opinions?   lstavenhagen
• [Elecraft] k2 power control fault   luca
• [Elecraft] K3, sound cards and PSK31   wb6rse1 at mac.com
• [Elecraft] KPA500 AMP Frequency Coverage   wb6rse1 at mac.com
• [Elecraft] CW/CW-REV config option   wb6rse1 at mac.com
• [Elecraft] QSK THUMPS?   eric manning
• [Elecraft] K1 for sale   mike.short at mchsi.com
• [Elecraft] Need Resistors   n0jrn
• [Elecraft] k2 pll and ref osc issues n0xdb WTF   n0jrn
• [Elecraft] My feelings   n0jrn
• [Elecraft] Heil HC-4, HC-5   Julius Fazekas n2wn
• [Elecraft] Just installed KSUN3!   Julius Fazekas n2wn
• [Elecraft] K2 accessories For Sale   Julius Fazekas n2wn
• [Elecraft] OT Sound Card and USB to Serial Port Hub   Julius Fazekas n2wn
• [Elecraft] OT Sound Card and USB to Serial Port Hub   Julius Fazekas n2wn
• [Elecraft] sound card recommendations   Julius Fazekas n2wn
• [Elecraft] Dayton Contest Dinner   Julius Fazekas n2wn
• [Elecraft] Dayton Contest Dinner   Julius Fazekas n2wn
• [Elecraft] Dayton Contest Dinner   Julius Fazekas n2wn
• [Elecraft] P3   eric norris
• [Elecraft] XV-432 power instability in SSB   eric norris
• [Elecraft] External Power Supply for the KPA-500   ny9h
• [Elecraft] OT: PC Monitor resolution   ny9h
• [Elecraft] K3 Auto Notch distortion   oe9fwv
• [Elecraft] thanks for feedback on k2 + kpa100 + kat100   paulb
• [Elecraft] [K3] CW Sidetone Pitch Change Problem - key clicks   paulb
• [Elecraft] EQ per mode?   pd0psb
• [Elecraft] EQ per mode?   pd0psb
• [Elecraft] K144XV European bandplan raster?   pd0psb
• [Elecraft] Want to buy K3   keg23 at poczta.onet.pl
• [Elecraft] RES: [K3] K3DSPUPGD   py5eg
• [Elecraft] RES: K3 birdies   py5eg
• [Elecraft] Elecraft SSB Net Announcement   phils at rio.com
• [Elecraft] Elecraft SSB Net Announcement   phils at rio.com
• [Elecraft] Ignore message sent in error.   phils at rio.com
• [Elecraft] Ignore message sent in error   phils at rio.com
• [Elecraft] P3 internal Power Supply Question   n6ax at speakeasy.net
• [Elecraft] How to pronounce the "/"?   gdaught6 at stanford.edu
• [Elecraft] How is the P3 Connected to the K3?   rmthorne at suddenlink.net
• [Elecraft] Knob?   srife at swbell.net
• [Elecraft] [K3] New Amp   srife at swbell.net
• [Elecraft] (no subject)   nq5t at tx.rr.com
• [Elecraft] k2 power control fault   uniroma
• [Elecraft] K3 and Expert 1K-FA   harrytheham at verizon.net
• [Elecraft] In praise of the K3   vk4cmv
• [Elecraft] K3 Replaced Your Pro III?   w5ov at w5ov.com
• [Elecraft] KPA500 - Full power on 6M   w4sec at windstream.net
• [Elecraft] KPA500 - Full power on 6M   w4sec at windstream.net
• [Elecraft] SCAF-1   palindrome3993 at yahoo.com

Last message date: Fri Apr 30 23:54:33 EDT 2010
Archived on: Fri Apr 30 23:55:48 EDT 2010

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...