[Elecraft] Another method to calibrate reference oscillator in K3.

[Dick Dievendorff]

It sounds like you might be confusing TX Gain cal with Ref  
Calibration. All you need for TX gain calibration is a dummy load. Can  
you perform the TX gain cal on all bands manually? This is the manual  
procedure where you press tune on all bands.

I'm away from home now without the Owners Manual to refer to.

Dick, K6KR


Sent from my iPhone

On Apr 18, 2010, at 3:52 AM, David Quental <ct1drb at gmail.com> wrote:

> Hello all,
>
> I still get ERR TXG and at same time, because lack of external  
> antennas,
> I could not get the melthod 2 (zero-beating) on page 50 of Owner's
> Manual. Is there any other method to calibrate the Reference  
> Oscillator
> using a computer ???
>
> Any help will be welcome here, tks.
>
> CT1DRB
> David Quental
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html