[Elecraft] K1 LED backlight anode annotation

[Don Wilhelm]

Greg,

Are you installing the backlight panel so the side marked with the "A" 
and "K" is next to the K1 board?  If not flip it over - you will not see 
the A and K markings when the backlight is installed correctly.

73,
Don W3FPR

ki4bbl wrote:
> I am at the point of installing the backlight in a new kit.  The manual says
> that the anode "A" will always be at the bottom of the backlight when the
> leads are to the left.  My backlight shows "A" on top of "K".  I did not see
> an errata sheet for the backlight.  Am I reading something wrong, or do I
> need to change something?
>
> Greg
> ki4bbl
>