[Elecraft] K3 KXV3A without Xverters, sub receiver or P3

[Karl Marderian]

Hi, N6XVT here,
Well also if you want general SWL lisoning. It has to do with pin  
diods in the ant 1/2, for muting during transmistion. In lower  
fequancies, the pin diods attenuant signal. There one would want the  
rx ant., KXV3A.
73

Sent from my iPhone

On Apr 6, 2010, at 1:41 PM, "Jack Regan" <ae6gc at sbcglobal.net> wrote:

> If I do not have a sub receiver, Xverter or a P3 is there any reason  
> to
> install a KXV3A?
>
>
>
> The only thing I could come up with was the possiblty to use seperate
> transmit and receive antennas under certain conditions.
>
> For example, a vertical for transmit (due take off angle) and  
> horizontal
> dipole for receive (less noisy and provides directivity).
>
>
>
> I picked this example because my small lot does not allow room for  
> beverage
> antennas which would be another case for using seperate transmit and  
> receive
> antennas.
>
>
>
> Jack, AE6GC K3 #1433.
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html