[Elecraft] W2IHY 8 band equalizer and EQ Plus

[ab2tc]

I am using a Heil Proset, IC element, Mic gain to LO, setting 35 and
compression set at 20. With this I can not talk the CMP reading above 10 or
the ALC reading above 7. I get good audio reports and just as importantly I
get heard remarkably well by DX stations.

AB2TC - Knut


Jim Brown-10 wrote:
> 
> On Mon, 26 Apr 2010 11:56:50 -0700 (PDT), ab2tc wrote:
> 
>>On the K3 what would be the approximate setting for 10dB compression?
> 
> Follow instructions in the K3 manual to set the meter to read 
> compression. Then follow the instructions in the manual for first 
> setting the mic gain without any compression, and then set the 
> compression with the compression control.  When you talk, you'll see the 
> compression bouncing around as you talk. It will start sounding bad when 
> it goes above 10dB on the hottest voice peaks. 
> 
> 73,
> 
> Jim Brown K9YC
> 
> <snip>
> 

-- 
View this message in context: http://elecraft.365791.n2.nabble.com/W2IHY-8-band-equalizer-and-EQ-Plus-tp4959845p4965456.html
Sent from the [K3] mailing list archive at Nabble.com.