[Elecraft] W2IHY 8 band equalizer and EQ Plus

[Mel Farrer]

Yes, and watch the ALC level while you are doing it.  I found that you can increase the compression and not trip the 5-7 bars of ALC, but it will sound terrible.  Stay below 10 dB of compression and under 5 bars of ALC for the smoothest sound and lack of splatter.  FWIW.

Mel, K6KBE

--- On Mon, 4/26/10, Jim Brown <jim at audiosystemsgroup.com> wrote:

From: Jim Brown <jim at audiosystemsgroup.com>
Subject: Re: [Elecraft] W2IHY 8 band equalizer and EQ Plus
To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
Date: Monday, April 26, 2010, 3:02 PM

On Mon, 26 Apr 2010 11:56:50 -0700 (PDT), ab2tc wrote:

>On the K3 what would be the approximate setting for 10dB compression?

Follow instructions in the K3 manual to set the meter to read 
compression. Then follow the instructions in the manual for first 
setting the mic gain without any compression, and then set the 
compression with the compression control.  When you talk, you'll see the 
compression bouncing around as you talk. It will start sounding bad when 
it goes above 10dB on the hottest voice peaks. 

73,

Jim Brown K9YC


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html