[Elecraft] Re： XV-series Transverters and K3?

[Johnny Siu]

Hello Martin,

XV144 integrates with K3 very well.  All you need are two coaxial and a interface cable.

However, XV144 is extremely hot even it is used at the rated output of 10W FM.  For light duty cycle, it should be less hot.

73

Johnny VR2XMC



----- 郵件原件 ----
寄件人﹕ DM4iM <hamradio at vr-web.de>
收件人﹕ elecraft <elecraft at mailman.qth.net>
傳送日期﹕ 2010/4/21 (三) 8:19:13 PM
主題： [Elecraft] XV-series Transverters and K3?

Elecrafters,
i don't doubt the internal Transverter perfectly integrates in the
K3 concept, but how well do the external XV-xxx Transverters
integrate? The manual describes integration with a K2 , but not
with K3.
I have a KXV3A installed in my K3 and a 15Pin cable.
A XV-144 is on its way over the pond (if the icelandic volcano permits).

Martin

-- 

73, DM4iM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html