[Elecraft] k2 assembly question

[Gary Hvizdak]

Fox,

 

    See figure 5-11 in your K2 manual.

 

    19 mm is the length of the spacers, not their thickness.

 

73,
Gary  KI4GGX

K2 #2724

 

  _____  

 

Foxjazz
<mailto:elecraft%40mailman.qth.net?Subject=Re:%20%5BElecraft%5D%20k2%20assem
bly%20question&In-Reply-To=%3C1366469632.20100401215510%40foxjazz.net%3E>  
Thu Apr 1 23:55:10 EDT 2010 

 

Hello Elecraft,
 
    I am attempting the led and backlight installation.
 
  I am using the spacers 6mm and it calls for 19mm which makes no
  sense to me. It says the diffuser must be 3mm above the pc board.
  How can you use a 19mm spacer and get 3mm. WTF
 
  It says leads may not protrude through the board, which is fine. I
  put it on and the diffuser is 10mm above the board.
 
  The problem I have is does the lcd go under or over the diffuser?
  the leads dont' reach if it's over. and I don't understand how it
  could fit under.
 
 
-- 
Best regards,
 Foxjazz                          mailto:foxr4 at foxjazz.net
<http://mailman.qth.net/mailman/listinfo/elecraft>