[Elecraft] K3 Notch [END of Thread]

[Eric Swartz - WA6HHQ, Elecraft]

Wayne has added this to his f/w list. Let's end the notch freq preset 
thread for now.

73, Eric


On 4/27/2010 9:17 AM, gary bartlett wrote:
> Change the firmware, or add an uncommon procedural step?
> I'm getting too old to remember stuff, Joe.  Let the radio do the work.
>
> 	73,
> 	Gary, VE1RGB
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Joe Subich, W4TV
> Sent: April 27, 2010 12:15 PM
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 Notch
>
>
> On 4/27/2010 10:50 AM, Val wrote:
>   >  I second that. There are a lot of turning to bring the notch from
>   >  2000 Hz to near my pitch of 390 Hz.
>
> Think about it for a minute ... the notch remembers its last used
> frequency except for the first time it is used after the K3 is
> turned on.  It it's that critical to you, simply turn on the notch
> and set it to 600-800 Hz when you turn on the radio.
>
> 73,
>
>      ... Joe, W4TV
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> .
>