[Elecraft] K1 - Moving the range of 40 meters from 7.100 up to 7.125?

[Byron KI6NUL]

Don Wilhelm-4 wrote:
> 
> It is easier to move all 4 bands upward.  Just spread the turns on L1 to 
> obtain the low frequency end point that you want.
> You will likely loose 30 meter coverage unless you change the crystal to 
> the one normally used for the 150 kHz VFO range.
> 

This is what I did.  The VFO range on my K1 is roughly 102 khz, and moving
L1 to a wider spacing, I ended up with:

40 : 7014 - 7117
30 : 10109 - 10212
20 : 14008 - 14111
15 : 21009 - 21112

So, as a general, I need to be careful at the low end of 40, 20, 15 and the
upper end of 30. So, not quite what you were asking for, but I hope it helps
anyway.

73,

Byron KI6NUL
-- 
View this message in context: http://elecraft.365791.n2.nabble.com/K1-Moving-the-range-of-40-meters-from-7-100-up-to-7-125-tp4987271p4987798.html
Sent from the [K1] mailing list archive at Nabble.com.