[Elecraft] RS232 connectivity P3/KPA500

[KF4VTT]

Hi Doug,

I hoped the cables would connect the way you described, but was not sure the
serial communications would pass through each device.  Since each auxiliary
piece of equipment is labeled with ports for PC and XCVR, which would be the
first connected to the PC and which would be connected to the K3.  I'm sure
this has been thought out, but since we do not have manuals for the KPA500
and P3, I wanted to check.

73,
Doug
KF4VTT
Doug Faunt N6TQS +1-510-655-8604 wrote:
> 
> Note that the KPA500 has them labeled "PC" and "xcvr", and that we
> already know that the P3 has a pass-through RS232 connection, so it
> appears the configurations are computer to KPA500, then another cable
> to the P3(if you have one) then another cable to the K3.
> 
> N6TV's photo is good and the labels are readable:
> http://picasaweb.google.com/rawilson/2010VisaliaInternationalDXConvention#5461795493258994210
> 
> 73, doug
> 
>    From: Doug Fleming <kf4vtt at mebtel.net>
>    Date: Tue, 20 Apr 2010 13:51:49 -0400
> 
>    I noticed the P3 and KPA500 both have RS232 interconnection to the  
>    K3.  I wonder if it will it be possible to have all three connected  
>    simultaneously and still have PC RS232 connectivity? ...or would that  
>    even be beneficial?
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> 

-- 
View this message in context: http://elecraft.365791.n2.nabble.com/RS232-connectivity-P3-KPA500-tp4934093p4940370.html
Sent from the [QRO] mailing list archive at Nabble.com.