[Elecraft] K3 KAT3 forgets settings

[K6LE]

Don, 

I guess you missed the fact that he is working with an indoor antenna...

If he has wind and water problems he is in even bigger trouble than he thinks!  :-) 

Rick
K6LE

On 4/12/2010, at 1:07 , Don Wilhelm wrote:

> LS,
> 
> If the L/C settings do not change, then the antenna load is changing.  
> Check for wind moving the antenna, loose coax connectors (especially if 
> UHF type which depend on being tight to provide a continuous path for 
> the shield), bad coax, a balun with water in it, broken wires that 
> sometimes make contact, and any other thing of that nature that you may 
> be able to think of.
> 
> 73,
> Don W3FPR
> 
> lstavenhagen wrote:
>> Well lemme do some more troubleshooting first. I got scientific on my lunch
>> break and started recording a few L/C settings. Sure enough, whilst I was
>> fiddling around, I got distinct changes in my SWR but the L/C settings were
>> remaining the same at the several frequencies. 
>>