[Elecraft] K3 KAT3 forgets settings

[Don Wilhelm]

LS,

If the L/C settings do not change, then the antenna load is changing.  
Check for wind moving the antenna, loose coax connectors (especially if 
UHF type which depend on being tight to provide a continuous path for 
the shield), bad coax, a balun with water in it, broken wires that 
sometimes make contact, and any other thing of that nature that you may 
be able to think of.

73,
Don W3FPR

lstavenhagen wrote:
> Well lemme do some more troubleshooting first. I got scientific on my lunch
> break and started recording a few L/C settings. Sure enough, whilst I was
> fiddling around, I got distinct changes in my SWR but the L/C settings were
> remaining the same at the several frequencies. 
>
>