[Elecraft] No transmitter gain.

[David Quental]

Hello John and other Elecrafters,
 
tks for your email. I did what you advice me but no luck, still no power
except when use ATU, there is really 5 watts output, on XMIT no power in
all bands.

Best 73 to all.

CT1DRB
David Quental

> On 4/17/2010 11:30 PM, David Quental wrote:
>   
>> Hello again,
>>
>> apart I do not get the transmitter gain on K3 Utility, doing the
>> transmitter gain on page 49 from Owner's Manual I get 0.0 watts in all
>> frequencies, however when I press ATU TUNE I get 5.0 watts.
>>
>> Any help will be welcome.
>>
>> Best 73.
>>
>> CT1DRB
>> David Quental
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>    
>>     
> David-
>      Have tried to adjust the WMTR LP or HP in the Config menu?  I had 
> email Elecraft about using low power for QRP Contest and they advised me 
> to adjust this setting for low power.  They told me that
> the normal setting is 70 but to achieve what I wanted I have my WMTR LP 
> setting on 180 and my WMTR HP setting on 145.  I did this because the 
> power reading from radio was not the same as what showed
> on my external watt meter.  Now they are pretty close.  Not for sure if 
> this helps in your question but maybe.
>
> John
> KM5PS
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>