[Elecraft] No transmitter gain.

[john]

On 4/17/2010 11:30 PM, David Quental wrote:
> Hello again,
>
> apart I do not get the transmitter gain on K3 Utility, doing the
> transmitter gain on page 49 from Owner's Manual I get 0.0 watts in all
> frequencies, however when I press ATU TUNE I get 5.0 watts.
>
> Any help will be welcome.
>
> Best 73.
>
> CT1DRB
> David Quental
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>    
David-
     Have tried to adjust the WMTR LP or HP in the Config menu?  I had 
email Elecraft about using low power for QRP Contest and they advised me 
to adjust this setting for low power.  They told me that
the normal setting is 70 but to achieve what I wanted I have my WMTR LP 
setting on 180 and my WMTR HP setting on 145.  I did this because the 
power reading from radio was not the same as what showed
on my external watt meter.  Now they are pretty close.  Not for sure if 
this helps in your question but maybe.

John
KM5PS