[Elecraft] K2: PSK-31 Power Settings

[Brett Howard]

4-5 bars of ALC is essentially the point where the ALC will begin to
engage and is thus the same thing as what Don is referring to.

~Brett

On Wed, 2010-04-28 at 21:52 -0600, Bob Cunnings wrote:
> On Wed, Apr 28, 2010 at 8:14 PM, Don Wilhelm <w3fpr at embarqmail.com> wrote:
> 
> > but the K2 (and K3) control the output level prior to the balanced
> > modulator, and will have trouble if used that way.  Set the power to the
> > level that is desired and then adjust the audio for no ALC for digital
> > modes.
> >
> 
> Except for the K3 which requires that audio be set for 4-5 bars ALC
> for digital modes.
> 
> Bob NW8L
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html