[Elecraft] LP-PAN and other SDR

[Larry Phipps]

Phil, is this the case for all bands, or just 2m? If it's all bands, make sure that the little cable that connects the K3 IF buffer to the rear panel connector is seated properly. Also, make sure all the applicable modules are enabled in Setup.

Larry N8LP


>
>
> Date: Fri, 09 Apr 2010 11:25:35 -0400
> From: "Phil LaMarche" <plamarc1 at verizon.net>
> Subject: [Elecraft] LP-PAN and other SDR
> To: <Elecraft at mailman.qth.net>
> Cc: LP-PAN at yahoogroups.com
> Message-ID: <56FA9E417074492F951C1E3D263E8C3E at LaMarcheEnterpr>
> Content-Type: text/plain;	charset="US-ASCII"
>
> Got my K3 back after having the 144 module installed and all hardware
> updates done.  Works wonderful except for one aspect.  I have several SDR
> platforms to use and in every one, the panadaptor base line is below the
> -140 and I can't see the signals.  Worked fine before.  Any ideas?
>  
> Phil
>  
> Philip LaMarche
>  
> LaMarche Enterprises, Inc
>  
> 727-944-3226
> 727-937-8834 Fax
> 727-510-5038 Cell 
>  
> www.w9dvm.com <http://www.w9dvm.com/> 
>  
> K3 #1605
>  
> CCA 98-00827
> CRA 1701
> W9DVM