[Elecraft] Question on the BL2 with the KX-1

[Don Wilhelm]

Peter,

You would connect the radiator to terminal A and the radials to terminal 
B.  If you want to connect to a ground (it is not necessary), then it 
will connect to the GND terminal.

The NorCal doublet is a complete antenna for parallel transmission line, 
and that has nothing to do with radials as you stated in the first part 
of the question.  Please clarify if you are asking about 2 different 
situations or did I misinterpret your question.

73,
Don W3FPR

Peter N. Spotts wrote:
> Hi Folks,
>
> Odd question as I get ready to take my KX-1 into the field: Can the BL2
> in effect replace the BNC-to-binding-post connectors for a random-wire
> antenna? As I looked at the BL2's circuit diagram, it appeared as though
> hooking the antenna to the A screw terminal, any radials to GND, and
> setting the switch to 1:1 might do the trick. But I wonder what the
> inductance present in that side's transformer windings might do to wreck
> this idea.
>
> Is this out to lunch, or can I leave the binding posts behind and take
> the balun assembly for more versatility in antenna choices? I'm also
> thinking of whipping up a version of the Norcal doublet. BTW, I have the
> auto tuner installed in the KX-1.
>
> With best regards,
>
> Pete "rusty on antenna stuff" Spotts
>