[Elecraft] K3 + RTTY

[Wes Stewart]

Two audio cables from the K3 Line In - Line out to a sound card In/Out.  MMTTY on computer.  K3 Mode "AFSK-A".  VOX "on".  Set K3 "pitch" to match MMTTY mark freq. 

Some experimentation is necessary to set K3 input/output levels and soundcard output/input levels for proper operation, but that is all you need in the way of software and hardware.

Enjoy. 

--- On Wed, 4/21/10, giuseppesolimano at libero.it <giuseppesolimano at libero.it> wrote:

> From: giuseppesolimano at libero.it <giuseppesolimano at libero.it>
> Subject: [Elecraft] K3 + RTTY
> To: elecraft at mailman.qth.net
> Date: Wednesday, April 21, 2010, 11:37 AM
> hi everybody,
> any suggests using K3 in RTTY?
> software, hardware if needed, etc.
> 
> thanks in advance
> 
> 73 de Peppe, I8UZA  
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>