[Elecraft] K3 K2 Spinners

[Don Rasmussen]

The spinner (inlay) for K3 is 1.5 inches. You need one. ;-)


--- On Sun, 4/25/10, Don Rasmussen <wb8yqj at yahoo.com> wrote:
> 
> 1. Tape the spinner to the K3/K2 knob
> 2. Fix the fingerdimple to the spinner (self adhesive)
> 
> Get it here - 
> 
> http://www.fingerdimple.com/
> 
> From Charlie K3ICH:
> E-Mail: pincon at erols.com
>  
>  
>  
> Thanks, Charlie k3ICH
>