[Elecraft] RS-232 connections

[2Cents]

A standard RS232 cable won't work.  The cable must be wired as shown in the
K2 manual.

Chuck
NN7U

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of RONALD R FREEMAN
Sent: Wednesday, April 21, 2010 11:50 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] RS-232 connections


Hello to all:

Just looking for some advise or help on setting up Ham Radio Deluxe with the
K2/100.  I've plugged in the RS-232 cable and set up the K2 defaults in HRD.
I also set up the COM port to 8, none, 2 with no Hardware.  The only "fly in
the ointment" is that I am using a Prolific Serial to USB converter cable.
I know the Prolific works because I have used it with other rigs.  I have
set the port to "on" and the sidetone to U8-4.  I am using the K2 in the low
power mode with +13.5 to the mini jack on the K2 and no power supply
connected to the K100.

My K2 will not connect with HRD or visa versa.  It seems to communicate
somewhat, but always fails on "read frequency".  I want to run PSK-31 and my
PC has NO serial port (seems like none of the newer one's do).  Any ideas??

Ron W0LPZ

 		 	   		  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 9.0.814 / Virus Database: 271.1.1/2823 - Release Date: 04/21/10
04:09:00