[Elecraft] K3 option request

[John E. Reiser]

C'mon.  Press XIT.  Turn the small knob until 2.0 appears in the VFO B area. 
There you go!

We don't need an "optional" feature.  There are too many already.

73,

John, W2GW


----- Original Message ----- 
From: "K6LE" <k6le at mac.com>
To: "Elecraft Reflector" <elecraft at mailman.qth.net>
Sent: Sunday, April 11, 2010 3:12 PM
Subject: Re: [Elecraft] K3 option request


>I have the Macro:
>
> SWT13;SWT13;FT1;UPB5;RT0;XT0;
>
> assigned to my PF1 key  (Split up 1)
>
> And
>
> SWT13;SWT13;FT1;UPB7;RT0;XT0;
>
> assigned to my PF2 key  (Split up 2)
>
> Several times I have been trying to work someone and they decide to go 
> split, they all of a sudden say "up 2", I press the PF2 key and I am there 
> nearly instantly.
>
> I wind up using those two macros constantly.
>
> BTW, one of the loggers I use on my Mac - RUMlog - has an info panel for 
> the K3 and above the VFO B frequency it shows your offset in red if you 
> are in split.
>
> Also, in MacLoggerDX there is a drop down menu to switch to split with 
> various offsets which I used to use extensively until I set up the macros.
>
> Rick
> K6LE
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>