[Elecraft] K1-where to start

[Don Wilhelm]

Greg,

I don't understand the confusion.  Open the manual and start at the 
beginning.  Follow the stpes in order from the front of the manual to 
the back.  This is a "tried and true" method.  The resistors are on a 
strip and placed on that strip in the proper order for the assembly 
steps.  If you have the 4 band board instead of the 2 band board, the 
manual tells you when to use the assembly steps for the 4 band board 
instead of following the instructions for the 2 band board.  It should 
all be very clear if you simply start at the beginning.

73,
Don W3FPR

ki4bbl at cox.net wrote:
> Hi all,
>
> If I can't start on the filter board first, which board can I start  
> assembling?  Does it really matter?  Can I just go right to the meat  
> of the rf board?
>
> Thanks
>
> Greg Doughty
> Ki4bbl
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>