[Elecraft] K2 low power

[Don Wilhelm]

Let me know if the LPF turns are the problem.  If not, I will have to 
ask you to use an RF Probe (or preferrably an oscilloscope) to make some 
comparative Signal Tracing reading between a band that works and one 
that does not.

73,
Don W3FPR

Conway Yee wrote:
>> If the low power and high current are only on 160, 80, 40, 20, 15, and
>> 10 meters, then check the number of turns on the Low Pass Filter
>> toroids.
>>     
>
> It appears to be 80,40,10,12 only.  15 and 20 are OK.  I am in the middle
> of checking the turns.
>
>   
>