[Elecraft] ERR TXG problem.

[Alfred Frugoli]

Hi David,

I ran into a similar problem a few weeks ago.  Are you using the latest K3
Utility?  Try using the manual calibration procedure in the K3 Manual.  Does
that work?  I had a similar problem that was related to an updated that the
K3 Utility needed.  I think the latest K3 Utility is on the web site now
though.

Good luck.

73 de Al, KE1FO

K3 #3055
K3 #4094
-----
Check out my Amateur Radio Contesting blog at ke1fo.wordpress.com.



On Sat, Apr 17, 2010 at 10:49 AM, David Quental <ct1drb at gmail.com> wrote:

> Hello a
>
> since yesterday I am at my home and have begun to assemble my Elecraft
> K3. All went fine until I have reached the ERR TXG problem. When I use
> the Elecraft K3 Utility I get always the same:
>
> Starting 5 watt calibration.
> Calibrating at 1,900 MHz
> Calibration power settled at '  0.0 W ;'
> 5 watt calibration failed.
> Elapsed time: 8,9 secs
>
> Any help will be welcome, tks in advance.
>
> CT1DRB
> David Quental
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>