October 2007 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Oct 1 00:00:46 EST 2007
Ending: Wed Oct 31 22:08:19 EST 2007
Messages: 1284

• [Elecraft] Elecraft CW Net Report for September 30th & October 1st, 2007   Kevin Rock
• [Elecraft] Analog meter   Ian Stirling
• [Elecraft] Analog meter   AJSOENKE at aol.com
• [Elecraft] Sherwood on ARRL Testing Methodology   Bill W5WVO
• [Elecraft] K rig's longevity?   David Woolley
• [Elecraft] K rig's longevity?   David Woolley
• [Elecraft] Sherwood on ARRL Testing Methodology (LONG!)   Julian G4ILO
  • [Elecraft] Sherwood on ARRL Testing Methodology (LONG!)   Stewart Baker
    • [Elecraft] Sherwood on ARRL Testing Methodology (LONG!)   Julian G4ILO
      • [Elecraft] Sherwood on ARRL Testing Methodology (LONG!)   Stewart Baker
      • [Elecraft] Sherwood on ARRL Testing Methodology (LONG!)   Simon Brown (HB9DRV)
      • [Elecraft] Sherwood on ARRL Testing Methodology (LONG!)   Simon Brown (HB9DRV)
      • [Elecraft] Sherwood on ARRL Testing Methodology (LONG!)   Stewart Baker
      • [Elecraft] Sherwood on ARRL Testing Methodology (LONG!)   Dohn
• [Elecraft] K2 Experience with SM-8 and Heil HM-I Microphones   Dr. Werner Furlan
• [Elecraft] Sherwood on ARRL Testing Methodology   Tom Hammond
  • [Elecraft] Sherwood on ARRL Testing Methodology   Goody K3NG
    • [Elecraft] Sherwood on ARRL Testing Methodology   n2ey at aol.com
• [Elecraft] Re: Elecraft Digest, Vol 41, Issue 51   Rick Wheeler
  • [Elecraft] Re: Elecraft Digest, Vol 41, Issue 51   Brett gazdzinski
    • [Elecraft] Re: Elecraft Digest, Vol 41, Issue 51   n2ey at aol.com
  • [Elecraft] Heath vs Elecraft   Fred Jensen
    • [Elecraft] Heath vs Elecraft   Dave Van Wallaghen
      • [Elecraft] Heath vs Elecraft   n2ey at aol.com
• [Elecraft] Re: FS: Elecraft AF1 audio filter *SOLD*   Andrew Moore
• [Elecraft] K rig's longevity?   Fred (FL)
• [Elecraft] Sherwood on ARRL Testing Methodology   Bill Tippett
  • [Elecraft] Sherwood on ARRL Testing Methodology   Don Wilhelm
• [Elecraft] Elecraft vs. Heath.   Darwin, Keith
  • [Elecraft] Elecraft vs. Heath.   Julian G4ILO
    • [Elecraft] Elecraft vs. Heath.   Bill W5WVO
    • [Elecraft] Elecraft vs. Heath.   Goody K3NG
  • [Elecraft] Elecraft vs. Heath.   Vic K2VCO
    • [Elecraft] Elecraft vs. Heath.   JT Croteau
      • [Elecraft] Elecraft vs. Heath.   Stephen W. Kercel
    • [Elecraft] Elecraft vs. Heath.   Darwin, Keith
    • [Elecraft] Elecraft vs. Heath.   Roelof Bakker
    • [Elecraft] Elecraft vs. Heath.   Matthew D. Fuller
• [Elecraft] Sherwood on ARRL Testing Methodology   d.cutter at ntlworld.com
• [Elecraft] K2 Reception Improvement - DSP or AF filter?   Darwin, Keith
• [Elecraft] WTB   Kevin Cozens
• [Elecraft] FS: *AGAIN* Elecraft AF1 audio filter - assembled - unused   Andrew Moore
• [Elecraft] FS: *SOLD AGAIN* Elecraft AF1 audio filter - assembled -unused   Andrew Moore
• [Fwd: [Elecraft] K2/100 Usable for Winlink 2000?]   Jim Campbell
• Fw: [Fwd: [Elecraft] K2/100 Usable for Winlink 2000?]   Bradford F Bartlett
• [Elecraft] K3 Rcv Ant question   hank.k8dd
  • [Elecraft] K3 Rcv Ant question   Lyle Johnson
    • [Elecraft] K3 Rcv Ant question   hank k8dd
• [Elecraft] Question about K3 band data on ACC connector   cw at dx.nl
  • [Elecraft] Question about K3 band data on ACC connector   Joe Subich, W4TV
• [Elecraft] K3 review for RadCom   Dave Sergeant
  • [Elecraft] K3 review for RadCom   Julian G4ILO
• [Elecraft] Heath vs Elecraft   N2EY at aol.com
• [Elecraft] Heath vs Elecraft   Bob Waddell
• [Elecraft] s/n 4276 VCO Alignment issue: SOLVED   kc4wvl
• [Elecraft] Heath vs Elecraft   k4beh at juno.com
• [Elecraft] Missing CR/LF?   Fred (FL)
  • [Elecraft] Missing CR/LF?   Joe-aa4nn
    • OT Re: [Elecraft] Missing CR/LF?   David F. Reed
  • [Elecraft] Missing CR/LF?   Fred Jensen
  • META [Elecraft] Missing CR/LF?   David Woolley
• [Elecraft] Happy Birthday N6KR!   Edward Dickinson, III
• [Elecraft] Today's HW-101?   Darwin, Keith
  • [Elecraft] Today's HW-101?   Brett gazdzinski
    • [Elecraft] Today's HW-101?   Darwin, Keith
      • [Elecraft] Today's HW-101?   michael taylor
      • [Elecraft] Today's HW-101?   Brett gazdzinski
    • [Elecraft] Today's HW-101?   n2ey at aol.com
  • [Elecraft] Today's HW-101 - Elecraft vs. Heath - What @#$%@#$   Lee Buller
  • [Elecraft] Today's HW-101?   n2ey at aol.com
    • [Elecraft] Today's HW-101?   michael taylor
• [Elecraft] Today's HW-101?   Fred (FL)
• [Elecraft] Re: Happy Birthday N6KR!   wayne burdick
  • [Elecraft] Re: Happy Birthday N6KR!   Gary D Krause
  • [Elecraft] Re: Happy Birthday N6KR!   Don Wilhelm
• [Elecraft] bday card for Wayne   Eric Swartz - WA6HHQ, Elecraft
  • [Elecraft] bday card for Wayne   Clark B. Wierda
  • [Elecraft] bday card for Wayne   Julian G4ILO
    • [Elecraft] bday card for Wayne   David Ferrington, M0XDF
• [Elecraft] Today's HW-101?   n2ey at aol.com
• [Elecraft] WTB: KIO2   john shadle
• [Elecraft] OT: removing "smoke smell" from electronics   john shadle
  • [Elecraft] OT: removing "smoke smell" from electronics   David King
  • [Elecraft] OT: removing "smoke smell" from electronics   Don Wilhelm
    • [Elecraft] OT: removing "smoke smell" from electronics   Ken N9VV
    • [Elecraft] OT: removing "smoke smell" from electronics   Edward Dickinson, III
      • [Elecraft] OT: removing "smoke smell" from electronics   Fred Jensen
      • [Elecraft] OT: removing "smoke smell" from electronics   Vic K2VCO
      • [Elecraft] OT: removing "smoke smell" from electronics   Fred Jensen
      • [Elecraft] OT: removing "smoke smell" from electronics   Edward Dickinson, III
  • [Elecraft] OT: removing "smoke smell" from electronics   Ron D'Eau Claire
• [Elecraft] my turn...   f9oj.7
• [Elecraft] Heath<>Elecraft   john.brewer at us.schneider-electric.com
• [Elecraft] OT: removing "smoke smell" from electronics   Fred (FL)
• [Elecraft] K3 Shipment to Dubai   Ruchan Ozatay
  • K3 CE Marking (was Re: [Elecraft] K3 Shipment to Dubai)   Toby Deinhardt
    • K3 CE Marking (was Re: [Elecraft] K3 Shipment to Dubai)   Julian G4ILO
• [Elecraft] OT: removing "smoke smell" from electronics   dlajr at bellsouth.net
• Fw: [Elecraft] bday card for Wayne   Ken Kopp
  • Fw: [Elecraft] bday card for Wayne   Eric Swartz - WA6HHQ, Elecraft
  • Fw: [Elecraft] bday card for Wayne   Robert Brigham
• [Elecraft] K3 Demonstrating with no available Antenna   Tony Fegan VE3QF
  • [Elecraft] K3 Demonstrating with no available Antenna   Lyle Johnson
• [Elecraft] KX1 and Straight key   Dave G.
• [Elecraft] RE: Heathkit vs Elecraft   Paul Pollock
• [Elecraft] Happy Birthday N6KR   Benny Aumala
• [Elecraft] Anyone else having a problem getting a reply from sales?   Mark Hampton
  • [Elecraft] Anyone else having a problem getting a reply from sales?   Simon Lewis
    • [Elecraft] Anyone else having a problem getting a reply from sales?   Eric Swartz - WA6HHQ, Elecraft
      • [Elecraft] Anyone else having a problem getting a reply from sales?   Ian Stirling
      • [Elecraft] Anyone else having a problem getting a reply from sales?   Eric Swartz - WA6HHQ, Elecraft
      • [Elecraft] Anyone else having a problem getting a reply from sales?   Mark Hampton
• [Elecraft] K3 in B'day photo   DOUGLAS ZWIEBEL
• [Elecraft] K3 Size   Edward Dickinson, III
• [Elecraft] N2CQ QRP Contest Calendar: Oct 2007   Ken Newman
• [Elecraft] Thanks for the B-Day Pic - but....   Lee Buller
  • [Elecraft] OT: Before Elecraft, Before Hea...   Ron D'Eau Claire
    • [Elecraft] OT: Before Elecraft, Before Hea...   Bill W5WVO
  • [Elecraft] Thanks for the B-Day Pic - but....   JT Croteau
• [Elecraft] Re: Elecraft Digest, Vol 42, Issue 3   robert hammond
• [Elecraft] Updated: www.n4lcd.com/k3   Paul at N4LCD.com
• [Elecraft] Re(Elecraft) Happy Birthday Wayne N6KR   Robert C.Abell
• [Elecraft] K2 snag again   Matt Palmer
  • [Elecraft] K2 snag again   Don Wilhelm
• [Elecraft] K2 snag again   Matt Palmer
• [Elecraft] bifiliar winding issues   Matt Palmer
  • [Elecraft] bifiliar winding issues   David Woolley
• [Elecraft] Switching vs Linear Power Supplies   Jack Regan
  • [Elecraft] Switching vs Linear Power Supplies   Clark B. Wierda
• [Elecraft] Switching vs Linear Power Supplies   Joseph Reed
• [Elecraft] New Region II Band Plan - 2008   David Wilburn
• [Elecraft] Switching vs Linear Power Supplies   ae6gc at sbcglobal.net
  • [Elecraft] Switching vs Linear Power Supplies   Brett gazdzinski
• K3 CE Marking (was Re: [Elecraft] K3 Shipment to Dubai)   Julian G4ILO
  • K3 CE Marking (was Re: [Elecraft] K3 Shipment to Dubai)   dj7mgq at muenchen-mail.de
• K3 CE Marking (was Re: [Elecraft] K3 Shipment to Dubai)   d.cutter at ntlworld.com
  • K3 CE Marking (was Re: [Elecraft] K3 Shipment to Dubai)   Stewart Baker
    • K3 CE Marking (was Re: [Elecraft] K3 Shipment to Dubai)   Julian G4ILO
      • K3 CE Marking (was Re: [Elecraft] K3 Shipment to Dubai)   dj7mgq at muenchen-mail.de
• [Elecraft] (no subject)   Robert Allbright
• K3 CE Marking (was Re: [Elecraft] K3 Shipment to Dubai)   d.cutter at ntlworld.com
• [Elecraft] The State of the Art   Bob Waddell
  • [Elecraft] The State of the Art   n2ey at aol.com
    • [Elecraft] The State of the Art   Dan KB6NU
• [Elecraft] K3 and KTCXO3-1   Paul at N4LCD.com
  • [Elecraft] K3 and KTCXO3-1   Simon Brown (HB9DRV)
  • [Elecraft] K3 and KTCXO3-1   Julian G4ILO
• [Elecraft] FOR SALE: Ten Tec 238 Tuner   J. W. (Dub) Thornton
• [Elecraft] restrictive CQs? SKCC, Fists etc. - protocol on who we can play with   Brian Pepperdine
  • [Elecraft] restrictive CQs? SKCC, Fists etc. - protocol on who we can play with   David Ferrington, M0XDF
    • [Elecraft] restrictive CQs? SKCC, Fists etc. - protocol onwho we can play with   Sandy
  • [Elecraft] restrictive CQs? SKCC, Fists etc. - protocol on who we can play with   Thom LaCosta
  • [Elecraft] restrictive CQs? SKCC, Fists etc. - protocol on who we can play with   Darwin, Keith
  • [Elecraft] restrictive CQs? SKCC, Fists etc. - protocol on who we can play with   Dan KB6NU
  • [Elecraft] restrictive CQs? SKCC, Fists etc. - protocol on who we can play with   Ron D'Eau Claire
  • [Elecraft] restrictive CQs? SKCC, Fists etc. - protocol on who we can play with   Gary D Krause
  • [Elecraft] restrictive CQs? SKCC, Fists etc. - protocol on who we can play with   Lee Buller
  • [Elecraft] restrictive CQs? SKCC, Fists etc. - protocol on who we can play with   David Wilburn
    • [Elecraft] restrictive CQs? SKCC, Fists etc. - protocol on who we can play with   Ron D'Eau Claire
  • [Elecraft] restrictive CQs? SKCC, Fists etc. - protocol on who we can play with   Mark Saunders, KJ7BS
• [Elecraft] restrictive CQs? SKCC, Fists etc. - protocol on who we can play with   J F
• [Elecraft] Elecraft sign-on frequency?   Don Rasmussen
  • [Elecraft] Elecraft sign-on frequency?   Kevin Rock
• [Elecraft] FS: Fully Loaded QRP K2   Bekir Kemal Ataman
• [Elecraft] K3 Filters: 2.7 or 2.8???   George
  • [Elecraft] CW Key wiring   David King
    • [Elecraft] CW Key wiring   David King
• [Elecraft] K3 Filters: 2.7 or 2.8???   Bill Tippett
• [Elecraft] K3 very high resolution picture   Paul at N4LCD.com
  • [Elecraft] K3 very high resolution picture   Edward Dickinson, III
    • [Elecraft] K3 very high resolution picture - Correction   Edward Dickinson, III
  • [Elecraft] K3 very high resolution picture - Correction   Edward Dickinson, III
• [Elecraft] ARCI Membership Dues   Andy - GM0NWI
• [Elecraft] K2 #6123 First Contact   David Woolley
• [Elecraft] icom 7700...   Brett gazdzinski
  • [Elecraft] icom 7700...   peter gerba
  • [Elecraft] icom 7700...   Scott Manthe
    • [Elecraft] icom 7700...   Brett gazdzinski
• [elecraft] How much is a KX-1 worth?   Craig D. Smith
• [Elecraft] IC7700   DOUGLAS ZWIEBEL
• [Elecraft] KXB30 sensitivity better than KXB3080?   Martin (VA3SIE)
  • [Elecraft] KXB30 sensitivity better than KXB3080?   Don Wilhelm
• [Elecraft] Departing list ......   Fred (FL)
  • [Elecraft] Departing list ......   Dohn
    • [Elecraft] Departing list ......   R. Kevin Stover
      • [Elecraft] Departing list ......   Simon Brown (HB9DRV)
    • [Elecraft] Departing list ......   Brett gazdzinski
• [Elecraft] FOR SALE: Ten Tec 238 Tuner   J. W. (Dub) Thornton
  • [Elecraft] Re:FOR SALE: Ten Tec 238 Tuner   J. W. (Dub) Thornton
• [Elecraft] Restrictive CQs   RonSpencer
  • [Elecraft] Restrictive CQs   Terry Schieler
• [Elecraft] Very cool link to a DX contest logbook   Jay Schwisow
• [Elecraft] Hakko 936?   Ian Stirling
  • [Elecraft] Hakko 936-12   Greg Beat
  • [Elecraft] Hakko 936?   R. Kevin Stover
  • [Elecraft] Hakko 936?   Don Wilhelm
    • [Elecraft] Hakko 936?   Brett gazdzinski
• [Elecraft] RE: [QRP-L] ARCI Membership Dues   k4ahk at ix.netcom.com
• [Elecraft] ARCI Membership Dues MANY THANKS   Andy - GM0NWI
• [Elecraft] n3csy,s memborable Farewell   n4dsp
• [Elecraft] re:Restrictive CQ's   n4dsp
• [Elecraft] Re: Elecraft Digest, Vol 42, Issue 7   Dixontribe at aol.com
• [Elecraft] CQ FISTS ,SKCC ETC   Paul Webb
  • [Elecraft] CQ FISTS ,SKCC ETC   Thom LaCosta
    • [Elecraft] CQ FISTS ,SKCC ETC   Dan KB6NU
      • [Elecraft] CQ FISTS ,SKCC ETC   Darwin, Keith
      • [Elecraft] CQ FISTS ,SKCC ETC   Dan KB6NU
      • [Elecraft] CQ FISTS ,SKCC ETC   Joe-aa4nn
      • [Elecraft] CQ FISTS ,SKCC ETC   Eric Swartz - WA6HHQ, Elecraft
      • [Elecraft][OT] CQ FISTS ,SKCC ETC   Thom LaCosta
      • [Elecraft][OT] CQ FISTS ,SKCC ETC [END of Thread]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Departing list ......   KU4YP
• [Elecraft] Important Elecraft List Notes   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 shipping on Oct 08   Joseph Trombino Jr
• [Elecraft] K3 shipping on Oct 08   Dave G4AON
  • [Elecraft] K3 shipping on Oct 08   Julian G4ILO
• [Elecraft] K3 shipping on Oct 08   Dave G4AON
  • [Elecraft] K3 shipping on Oct 08   David Ferrington, M0XDF
  • [Elecraft] K3 shipping on Oct 08   Thom LaCosta
• [Elecraft] Departing list ......   Brett gazdzinski
• [Elecraft] restrictive CQs? SKCC, Fists etc. - protocol on who we can play with   Russell Ruby
• [Elecraft] K3 Manual and updated Assembly Manual?   n2zdb at aol.com
  • [Elecraft] K3 Manual and updated Assembly Manual?   Thom LaCosta
• [Elecraft] Checking K2 sensitivity...   Steve Kallal
  • [Elecraft] Checking K2 sensitivity...   Darwin, Keith
  • [Elecraft] Checking K2 sensitivity...   Ron D'Eau Claire
• [Elecraft] KAT2 aligned and working but..   JT Croteau
  • [Elecraft] KAT2 aligned and working but..   Tom Hammond
  • [Elecraft] KAT2 aligned and working but..   Don Wilhelm
• [Elecraft] Checking K2 sensitivity...   Dave G4AON
• [Elecraft] KAT2 aligned and working but..   JT Croteau
• [Elecraft] Checking K2 sensitivity...   Dave G4AON
• [Elecraft] KX1 power on problem   Mike Scott
  • [Elecraft] KX1 power on problem   Kurt Pawlikowski
• [Elecraft] New Product request ...   Paul Pollock
  • [Elecraft] New Product request ...   Don Wilhelm
  • [Elecraft] K2 SSB TX Alignment Tools Proposal (was: New Product request ...)   David Woolley
• [Elecraft] OT - Heath CW Twins   David Wilburn
  • [Elecraft] OT - Heath CW Twins   Brett gazdzinski
  • [Elecraft] OT - Heath CW Twins   Stephen W. Kercel
• [Elecraft] KPA100/KAT100 trouble   Christopher A. Kantarjiev
  • [Elecraft] KPA100/KAT100 trouble   Don Wilhelm
• [Elecraft] New Product request ...   Dave G4AON
• [Elecraft] Simple spectrum analyser for SSB TX testing   Dave G4AON
  • [Elecraft] Simple spectrum analyser for SSB TX testing   Don Wilhelm
• [Elecraft] Soldering Iron Temperature   David Robertson
  • [Elecraft] Soldering Iron Temperature   Ron D'Eau Claire
• [Elecraft] K2: Using PC Microphone - How To.   David Woolley
• [Elecraft] Simple spectrum analyser for SSB TX testing   Dave G4AON
• [Elecraft] next K3 communication/update due today   DOUGLAS ZWIEBEL
• [Elecraft] OT - Heath CW Twins   John H Gibson
• [Elecraft] Re: [N1MM] Elecraft K3 with N1MM   Tom Hammond
  • [Elecraft] Re: [N1MM] Elecraft K3 with N1MM   Jay Schwisow
    • [Elecraft] Re: [N1MM] Elecraft K3 with N1MM   Ed Muns
  • [Elecraft] K3: Have any FT tried WinTest out yet?   Toby Deinhardt
    • [Elecraft] K3: Have any FT tried WinTest out yet?   AB7R
      • [Elecraft] K3: Have any FT tried WinTest out yet?   Toby Deinhardt
      • [Elecraft] K3: Have any FT tried WinTest out yet?   Ed Muns
• [Elecraft] re: next K3 communication/update due today   Mark Hampton
• [Elecraft] K3 "status" update is not the same as "when will it ship"   DOUGLAS ZWIEBEL
  • [Elecraft] K3 "status" update is not the same as "when will it ship"   Ian J Maude
    • [Elecraft] K3 "status" update is not the same as "when will it ship"   Ian J Maude
      • [Elecraft] K3 "status" update is not the same as "when will itship"   Stan Rife
      • [Elecraft] K3 "status" update is not the same as "when willitship"   Phillip Buckholdt
• [Elecraft] Comparison: K3 and SDR 5000A   John Wiener
  • [Elecraft] Comparison: K3 and SDR 5000A   John A. McCabe
• [Elecraft] KX1 power on problem   Bob Waddell
• [Elecraft] Comparison: K3 and SDR 5000A   Bill Tippett
  • [Elecraft] Comparison: K3 and SDR 5000A   David Wilburn
    • [Elecraft] Comparison: K3 and SDR 5000A   Toby Deinhardt
      • [Elecraft] Comparison: K3 and SDR 5000A   David Wilburn
  • [Elecraft] Comparison: K3 and SDR 5000A   Richard Smith
• [Elecraft] OT - Heath CW Twins   N2EY at aol.com
• [Elecraft] Comparison: K3 and SDR 5000A   Bill Tippett
  • [Elecraft] Comparison: K3 and SDR 5000A   John A. McCabe
  • [Elecraft] Comparison: K3 and SDR 5000A   Lyle Johnson
    • [Elecraft] Re: Comparison: K3 and SDR 5000A   wayne burdick
    • [Elecraft] Comparison: K3 and SDR 5000A   Joe Subich, W4TV
• [Elecraft] KX1   Mike Scott
• [Elecraft] Comparison: K3 and SDR 5000A   Randy Downs
• [Elecraft] Re: Comparison: K3 and SDR 5000A   Bill Tippett
• [Elecraft] OT - Heath CW Twins   John H Gibson
• [Elecraft] re: K3 "status" update is not the same as "when will it ship"   Mark Hampton
• [Elecraft] K2 problem with 4 MHZ calibration   Mike Scott
  • [Elecraft] K2 problem with 4 MHZ calibration   Don Wilhelm
• [Elecraft] KSB2 OP1 filter USB response...   Steve Kallal
  • [Elecraft] KSB2 OP1 filter USB response...   Don Wilhelm
  • [Elecraft] KSB2 OP1 filter USB response...   John Magliacane
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] ECN update   Kevin Rock
• [Elecraft] K2 new builder (maybe) need historical info   Martin Sole
  • [Elecraft] K2 new builder (maybe) need historical info   David Pratt
  • [Elecraft] K2 new builder (maybe) need historical info   Martin Sole
  • [Elecraft] K2 new builder (maybe) need historical info   Don Wilhelm
• [Elecraft] K2 new builder (maybe) need historical info   Dave G4AON
• [Elecraft] K2 new builder (maybe) need historical info   Dave G4AON
  • [Elecraft] K2 new builder (maybe) need historical info   Joe-aa4nn
    • [Elecraft] K2 new builder (maybe) need historical info   Toby Deinhardt
• [Elecraft] RE: 2. Re: K2 SSB TX Alignment Tools Proposal   Web Williams
  • [Elecraft] RE: 2. Re: K2 SSB TX Alignment Tools Proposal   David Woolley
  • [Elecraft] RE: 2. Re: K2 SSB TX Alignment Tools Proposal   Ron D'Eau Claire
• [Elecraft] K3 in the CQP   Vic K2VCO
• [Elecraft] K2 IF amplifier output fault   Alan Ibbetson
  • [Elecraft] K2 IF amplifier output fault   Roelof Bakker
    • [Elecraft] K2 IF amplifier output fault   Alan Ibbetson
  • [Elecraft] K2 IF amplifier output fault   Don Wilhelm
    • [Elecraft] K2 IF amplifier output fault   Alan Ibbetson
      • [Elecraft] K2 IF amplifier output fault   Don Wilhelm
      • [Elecraft] K2 IF amplifier output fault   Brett gazdzinski
• RE [Elecraft] K3 review for RadCom G3YMC   Robert Allbright
• [Elecraft] Elecraft CW Net Report for October 7th & 8th, 2007   Kevin Rock
  • [Elecraft] QSK and Monitor on the K3   Ed Muns
• [Elecraft] Need advice - which Elecraft rig for SE Asia?   Chris Wagner
  • [Elecraft] Need advice - which Elecraft rig for SE Asia?   Vic K2VCO
    • [Elecraft] Need advice - which Elecraft rig for SE Asia?   Robert Tellefsen
      • [Elecraft] Need advice - which Elecraft rig for SE Asia?   Vic K2VCO
      • [Elecraft] Need advice - which Elecraft rig for SE Asia?   Robert Tellefsen
• [Elecraft] FT report on K3 subreceiver   adamkern at uchicago.edu
  • [Elecraft] FT report on K3 subreceiver   Ed Muns
  • [Elecraft] FT report on K3 subreceiver   Tree
    • [Elecraft] FT report on K3 subreceiver   Andrew Moore
      • [Elecraft] FT report on K3 subreceiver   David Ferrington, M0XDF
      • [Elecraft] FT report on K3 subreceiver   Lyle Johnson
      • [Elecraft] FT report on K3 subreceiver   David Ferrington, M0XDF
      • [Elecraft] Re: FT report on K3 subreceiver   wayne burdick
      • [Elecraft] Re: FT report on K3 subreceiver   David Ferrington, M0XDF
      • [Elecraft] Re: FT report on K3 subreceiver   Lyle Johnson
      • [Elecraft] Re: FT report on K3 subreceiver   wayne burdick
• [Elecraft] Re: [PVRC] Today's Wall Street Journal   John D'Ausilio
  • [Elecraft] Re: [PVRC] Today's Wall Street Journal   Ken Kopp
• [Elecraft] Re: K2 IF amplifier output fault   Chris Kantarjiev
• [Elecraft] K3 simultaneous main/sub receive   Andrew Moore
  • [Elecraft] K3 simultaneous main/sub receive   Lyle Johnson
• [Elecraft] [Fwd: WSJ.com - --- -. . -- .- -. .----. ... -... .. -.. - --- ... .- ...- . -- --- .-. ... . -.-. --- -.. .]   Jeff Stai
  • [Elecraft] [Fwd: WSJ.com - --- -. . -- .- -. .----. ... -... .. -.. - --- ... .- ...- . -- --- .-. ... . -.-. --- -.. .]   Jay Schwisow
• [Elecraft] Attn: John, N8ELR   Ken Kopp
• [Elecraft] OT: looking for a ride to Pacificon   John Shadle
• [Elecraft] FS: hard-sided case (photo)   John Shadle
• [Elecraft] FS: hard-sided case for KX1   John Shadle
• [Elecraft] K2 AGC Threshold Adjustment   Jim Stoneback
  • [Elecraft] K2 AGC Threshold Adjustment   DolfinDon at msn.com
  • [Elecraft] K2 AGC Threshold Adjustment   Robert Tellefsen
  • [Elecraft] K2 AGC Threshold Adjustment   Don Wilhelm
• Fwd: [Elecraft] Comparison: K3 and SDR 5000A   Bill Tippett
  • [Elecraft] Comparison: K3 and SDR 5000A   Brett gazdzinski
  • [Elecraft] Comparison: K3 and SDR 5000A   Richard Smith
    • [Elecraft] Comparison: K3 and SDR 5000A   Joe Subich, W4TV
    • [Elecraft] Comparison: K3 and SDR 5000A   Darwin, Keith
      • [Elecraft] Comparison: K3 and SDR 5000A   Richard Thorne
    • [Elecraft] Comparison: K3 and SDR 5000A   John A. McCabe
      • [Elecraft] Comparison: K3 and SDR 5000A   Richard Smith
      • [Elecraft] PC->K3 command responsiveness   wayne burdick
      • [Elecraft] PC->K3 command responsiveness   Robert Tellefsen
      • [Elecraft] Re: PC->K3 command responsiveness   Richard Smith
      • [Elecraft] K3 and possible P3   Don Nesbitt
      • [Elecraft] Comparison: K3 and SDR 5000A   John A. McCabe
      • [Elecraft] Comparison: K3 and SDR 5000A   Richard Smith
      • [Elecraft] Comparison: K3 and SDR 5000A   Lyle Johnson
      • [Elecraft] Comparison: K3 and SDR 5000A   Richard Smith
      • [Elecraft] Comparison: K3 and SDR 5000A   Lyle Johnson
      • [Elecraft] Comparison: K3 and SDR 5000A   Richard Smith
• Fw: [Elecraft] [Fwd: WSJ.com - --- -. . -- .- -. .----. ... -... .. -.. - --- ... .- ...- . -- --- .-. ... . -.-. --- -.. .]   Ken Kopp
• [Elecraft] CW Reverse   Mike Harris
• [Elecraft] K2 headphone jack removal - a tip   Roger Stein
• [Elecraft] Attn: Dave W1EUY   Ken Kopp
• [Elecraft] Griffin EarJams   Chris Kantarjiev
  • [Elecraft] Griffin EarJams   Bill W5WVO
    • [Elecraft] Griffin EarJams   Chris Kantarjiev
      • [Elecraft] Rig Control   Thom LaCosta
• [Elecraft] XV50: Problem with Errata C-4   JT Croteau
• [Elecraft] EarJams and Fletcher-Munsen   Neal Enault
• [Elecraft] HI CUR question   Larry Naumann
  • [Elecraft] HI CUR question   Don Wilhelm
  • [Elecraft] HI CUR question   Stephen W. Kercel
• [Elecraft] Fried N-Gen - what components to reorder?   Andrew Moore
  • [Elecraft] Fried N-Gen - what components to reorder?   Don Wilhelm
    • [Elecraft] Fried N-Gen - what components to reorder?   John D'Ausilio
  • [Elecraft] Fried N-Gen - what components to reorder?   KBG Luxford
• [Elecraft] Re: CX Report   Sandy
  • [Elecraft] Re: CX Report   Joe Subich, W4TV
    • [Elecraft] Re: CX Report   Terry Myers
  • [Elecraft] Re: CX Report   hank k8dd
    • [Elecraft] Re: CX Report [END of Thread]   Eric Swartz - WA6HHQ, Elecraft
  • [Elecraft] Re: CX Report   N2TK, Tony
    • [Elecraft] Re: CX Report   Sandy
• [Elecraft] NAQCC October Sprint   Larry Makoski
• [Elecraft] Melbourne Florida hamfest this weekend   Doug Shields
• [Elecraft] K3 Shipping   Nick Henwood
  • [Elecraft] K3 Shipping   Thom LaCosta
• [Elecraft] k3 delivery   Benny Aumala
  • [Elecraft] k3 delivery   Julian G4ILO
    • [Elecraft] k3 delivery   Thom LaCosta
  • [Elecraft] k3 delivery   Craig Rairdin
• [Elecraft] K3 status - Stay tuned!   Eric Swartz WA6HHQ - Elecraft
  • [Elecraft] K3 status - Stay tuned!   Simon Brown (HB9DRV)
• [Elecraft] [Fwd: One Man's Attempt To Save Morse Code]   Eric Swartz - WA6HHQ, Elecraft
  • [Elecraft] IF output bandwidth for panadaptor   Ross Stenberg
    • [Elecraft] IF output bandwidth for panadaptor   Lyle Johnson
    • [Elecraft] IF output bandwidth for panadaptor   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Comparison: K3 and SDR 5000A   Bill Tippett
• [Elecraft] K3 Shipping/Discussions/Database   Thom LaCosta
• [Elecraft] Logger32   Mike Harris
  • [Elecraft] Logger32   Don Wilhelm
    • [Elecraft] Logger32   Mike Harris
      • [Elecraft] Logger32   Joe Subich, W4TV
      • [Elecraft] Logger32   Mike Harris
      • [Elecraft] Logger32   Jack Brindle
• [Elecraft] [Fwd: One Man's Attempt To Save Morse Code]   Jerry T. Dowell
• [Elecraft] K3 status - Stay tuned!   Don Rasmussen
  • [Elecraft] K3 status - Stay tuned!   Darwin, Keith
• [Elecraft] Paying outstanding balance   John [K7SVV]
• [Elecraft] OT: Blonde CW op.   Darwin, Keith
• [Elecraft] Paying outstanding balance   Dave G4AON
• [Elecraft] KPA-1500 option for the K3?   Toby Deinhardt
• [Elecraft] K3 S/N 00011   Ed Muns
  • [Elecraft] K3 S/N 00011   Robert Friess
  • [Elecraft] K3 S/N 00011   Ed Muns
  • [Elecraft] Re: K3 S/N 00011   wayne burdick
• [Elecraft] K3 S/N 00011   Don Rasmussen
• [Elecraft] Eric or Wayne - Re: XV50: Problem with Errata C-4   JT Croteau
  • [Elecraft] Eric or Wayne - Re: XV50: Problem with Errata C-4   Mike Harris
    • [Elecraft] Eric or Wayne - Re: XV50: Problem with Errata C-4   JT Croteau
• [Elecraft] Hope Springs Eternal   w6jd at comcast.net
  • [Elecraft] Hope Springs Eternal   David Ferrington, M0XDF
• [Elecraft] Hope Springs Eternal   Don Rasmussen
• [Elecraft] K2 Seven Years Old   Steve & Anne Ray
  • [Elecraft] K2 Seven Years Old   Andy - GM0NWI
    • [Elecraft] K2 Seven Years Old   Bob Fish
  • [Elecraft] K2 Seven Years Old   Kevin Rock
  • [Elecraft] K2 Seven Years Old   TL_Netvision
• [Elecraft] Troubleshooting KAT100   Don Sandstrom
• [Elecraft] Re: CX Report   N2EY at aol.com
• [Elecraft] Could This Be Yours?   Gary Hvizdak
• [Elecraft] K3s Start Shipping!   Eric Swartz - WA6HHQ, Elecraft
  • [Elecraft] K3s Start Shipping!   k4tmc at aol.com
  • [Elecraft] K3s Start Shipping!   Stan Rife
  • [Elecraft] She's Beautiful (K3s Start Shipping! )   Darwin, Keith
  • [Elecraft] K3s Start Shipping!   Brett gazdzinski
• [Elecraft] Original K3 announouncement   David Ferrington, M0XDF
• [Elecraft] K2 S/N3068 First QSO   KBG Luxford
• [Elecraft] K3 shipping   David Douglass
  • [Elecraft] K3 shipping   Darwin, Keith
    • [Elecraft] K3 shipping   David Ferrington, M0XDF
      • [Elecraft] K3 shipping   Darwin, Keith
• [Elecraft] K3 Shipping box sizes   Ruchan Ozatay
• [Elecraft] [K3][K2] best way to work split   David Ferrington, M0XDF
  • [Elecraft] [K3][K2] best way to work split   Fred Jensen
• [Elecraft] FOR SALE   nv9z at aol.com
• [Elecraft] Magnetic Fields   Dave & Jeanne Robertson
  • [Elecraft] Magnetic Fields   Jean-François Ménard
• [Elecraft] Thanks   David Ferrington, M0XDF
• [Elecraft] How many K3's in a production run?   Michael Harvey
• [Elecraft] She's Beautiful (K3s Start Shipping! )   Don Rasmussen
• [Elecraft] K2 wanted   Mike Azzarello
• [Elecraft] Milestone Technologies   Andy - GM0NWI
  • [Elecraft] Milestone Technologies   David King
• [Elecraft] Standby for a Great Manual!   Rick Tavan N6XI
• [Elecraft] re: printing new manual   Ken N9VV
  • [Elecraft] re: printing new manual   Dan KB6NU
  • [Elecraft] re: printing new manual   Tom Hammond
  • [Elecraft] re: printing new manual   David Ferrington, M0XDF
• [Elecraft] K3 Manual Question   Craig D. Smith
  • [Elecraft] K3 Manual Question   Bill W5WVO
    • [Elecraft] K3 Manual Question   Craig Rairdin
      • [Elecraft] K3 Manual Question   Bill W5WVO
      • [Elecraft] K3 Manual Question   Julian G4ILO
      • [Elecraft] K3 Manual Question [END of thread]   Eric Swartz - WA6HHQ, Elecraft
      • [Elecraft] K3 Manual Question   Julian G4ILO
• [Elecraft] Re: KPA 100 pA issues,,,, puzzle...   Bill NY9H
  • [Elecraft] Re: KPA 100 pA issues,,,, puzzle...   Jean-François Ménard
  • [Elecraft] Re: KPA 100 pA issues,,,, puzzle...   Don Wilhelm
    • [Elecraft] Re: KPA 100 pA issues,,,, puzzle...   Bill NY9H
• [Elecraft] K3 questions   mwt at montrose.net
• [Elecraft] Re: [LP-100] Re: KPA 100 pA issues,,,, puzzle...   Larry Phipps
• Fw: [Elecraft] Magnetic Fields   Dave & Jeanne Robertson
• [Elecraft] re: printing new manual   Don Rasmussen
• [Elecraft] K3 Owner's Manual Posted   Eric Swartz - WA6HHQ, Elecraft
  • [Elecraft] K3 Owner's Manual Posted   David Ferrington, M0XDF
    • [Elecraft] K3 Owner's Manual Posted   John [K7SVV]
    • [Elecraft] K3 Owner's Manual Posted   David Pratt
• [Elecraft] K3 Schematics Posted   Eric Swartz - WA6HHQ, Elecraft
  • [Elecraft] K3 Schematics Posted   Martin Sole
• [Elecraft] K3 Manual Question   N2EY at aol.com
• [Elecraft] K3 Owner's Manual Posted   Don Rasmussen
• [Elecraft] K3 Schematics not found!   N2ZDB at aol.com
  • [Elecraft] K3 Schematics not found!   AB7R
  • [Elecraft] K3 Schematics not found!   David Ferrington, M0XDF
  • [Elecraft] K3 and MARS   Steven Pituch
• [Elecraft] Found the schematics.....   N2ZDB at aol.com
• [Elecraft] K3 Schematics Posted   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3's EQ Rececive Feature - Wow!   Lee Buller
  • [Elecraft] K3's EQ Rececive Feature - Wow!   AB7R
• [Elecraft] K3 manuals   Robert Tellefsen
  • [Elecraft] Re: K3 manuals   wayne burdick
• [Elecraft] [K3] Manual etc   David Ferrington, M0XDF
• [Elecraft] reduced-size K3 Owner's Manual now available   wayne burdick
• [Elecraft] K3 Manual   k4zm
• [Elecraft] K3 Unanswered Questons   Bill Tippett
  • [Elecraft] K3 Unanswered Questons   Vic K2VCO
  • [Elecraft] Re: K3 Unanswered Questons   wayne burdick
• [Elecraft] K2: Can the KPA100 and KAT100 Live in the same EC2 box?   KBG Luxford
  • [Elecraft] K2: Can the KPA100 and KAT100 Live in the same EC2 box?   Don Wilhelm
• [Elecraft] k3 external freq ref   stephen pearce
  • [Elecraft] k3 external freq ref   AB7R
• [Elecraft] K3 CW to Data and "ES" for ampersand?   Leigh L Klotz, Jr.
  • [Elecraft] K3 CW to Data and "ES" for ampersand?   wayne burdick
    • [Elecraft] K3 CW to Data and "ES" for ampersand?   Bob Cunnings
      • [Elecraft] K3 CW to Data and "ES" for ampersand?   Kevin Rock
      • [Elecraft] K3 CW to Data and "ES" for ampersand?   Bob Cunnings
      • [Elecraft] K3 CW to Data and "ES" for ampersand?   Ron D'Eau Claire
      • [Elecraft] K3 CW to Data and "ES" for ampersand?   Kevin Rock
      • [Elecraft] K3 CW to Data and "ES" for ampersand?   David Pratt
      • [Elecraft] K3 CW to Data and "ES" for ampersand?   Thom LaCosta
      • [Elecraft] K3 CW to Data and "ES" for ampersand?   dj7mgq at muenchen-mail.de
• [Elecraft] EU Import Duty Codes   Peter Bacon
  • [Elecraft] EU Import Duty Codes   David Ferrington, M0XDF
• [Elecraft] Ham Radio Deluxe & K3   Simon Brown (HB9DRV)
  • [Elecraft] Ham Radio Deluxe & K3   Vic K2VCO
• [Elecraft] re: printing new manual   d.cutter at ntlworld.com
  • [Elecraft] re: printing new manual   David Ferrington, M0XDF
  • [Elecraft] re: printing new manual   Ken K3IU
  • [Elecraft] re: printing new manual   Ken K3IU
  • [Elecraft] printing new manual   David Woolley
• [Elecraft] K2 as a Subreceiver   Martin
• [Elecraft] (no subject)   Gordon & Lois Duff
• [Elecraft] K3 Manual Question   N2EY at aol.com
• [Elecraft] K3: RS-232 cable   Julian G4ILO
  • [Elecraft] K3: RS-232 cable   JT Croteau
    • [Elecraft] K3: RS-232 cable   Julian G4ILO
    • [Elecraft] K3: RS-232 cable   Thom LaCosta
      • [Elecraft] K3: RS-232 cable   JT Croteau
      • [Elecraft] K3: RS-232 cable   Thom LaCosta
      • [Elecraft] K3: RS-232 cable   Ed Muns
      • [Elecraft] K3: RS-232 cable   Julian G4ILO
      • [Elecraft] K3: RS-232 cable   JT Croteau
      • [Elecraft] K3: RS-232 cable   JT Croteau
      • [Elecraft] K3: RS-232 cable   Ed Muns
      • [Elecraft] K3: RS-232 cable   Julian G4ILO
      • [Elecraft] K3: RS-232 cable   Thom LaCosta
      • [Elecraft] K3: RS-232 cable   Tree
    • [Elecraft] K3/K2: RS-232 cable   Don Wilhelm
      • [Elecraft] K3/K2: RS-232 cable   Don Wilhelm
  • [Elecraft] K3: RS-232 cable   Mark Bayern
    • [Elecraft] K3: RS-232 cable   JT Croteau
      • [Elecraft] K3: RS-232 cable   Mark Bayern
      • [Elecraft] K3: RS-232 cable   Julian G4ILO
• [Elecraft] ssb on k3   Larry Maguire
• [Elecraft] K3: DIG 0   Julian G4ILO
  • [Elecraft] K3: DIG 0   Ken K3IU
  • [Elecraft] K3: DIG 0   Ed Muns
• [Elecraft] printing new manual   Joe, aa4nn
• [Elecraft] RS-232 cable   Joe, aa4nn
  • [Elecraft] RS-232 cable   Thom LaCosta
    • [Elecraft] RS-232 cable   JT Croteau
  • [Elecraft] RS-232 cable   David Fleming
• [Elecraft] K3 CW to Data and "ES" for ampersand?   Leigh L Klotz, Jr.
• [Elecraft] Put [K3] etc. on all product specific subject lines   Eric Swartz - WA6HHQ Elecraft
• [Elecraft] K3: RS-232 cable   Greg - AB7R
• [Elecraft] ssb on k3   Tom Hammond
• [Elecraft] K3: DIG 0   Greg - AB7R
  • [Elecraft] K3: DIG 0   Julian G4ILO
• [Elecraft] K3 Manual error   Ian J Maude
  • [Elecraft] K3 Manual error   David Ferrington, M0XDF
  • [Elecraft] K3 Manual error   Tom Hammond
• [Elecraft] [K3] K3 Rcv Ant Question   hank k8dd
• [Elecraft] [K3] KDVR3   Bruce Beford
  • [Elecraft] [K3] KDVR3   David Ferrington, M0XDF
• [Elecraft] re: printing new manuale: Elecraft Digest, Vol 42, Issue 18   Giancarlo Moda
  • [Elecraft][OT] re: printing new manuale: Elecraft Digest, Vol 42, Issue 18   Thom LaCosta
• [Elecraft] K3 AGC Adjustment Parameters   dhhdeh at comcast.net
  • [Elecraft] K3 AGC Adjustment Parameters   Vic K2VCO
• [Elecraft] test   Phillip Buckholdt
• [Elecraft] Soldering stations   gregory.beat at comcast.net
• [Elecraft] K3 - keying an amp   Stewart Rolfe
  • [Elecraft] Re: K3 - keying an amp   Stewart Rolfe
    • [Elecraft] Re: K3 - keying an amp   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] PL-259 modification   Sandy
  • [Elecraft] PL-259 modification   Ken Kopp
• [Elecraft] K3 AGC Adjustment Parameters   Don Rasmussen
  • [Elecraft] Re: K3 AGC Adjustment Parameters   wayne burdick
    • [Elecraft] Re: K3 AGC Adjustment Parameters   David Ferrington, M0XDF
      • [Elecraft] Re: K3 AGC Adjustment Parameters   wayne burdick
    • [Elecraft] Re: K3 AGC Adjustment Parameters   Don Rasmussen
      • [Elecraft] Re: K3 AGC Adjustment Parameters   Brett gazdzinski
      • [Elecraft] Re: K3 AGC Adjustment Parameters   Julian G4ILO
      • [Elecraft] AM signals in SSB mode w/6 kHz filte   wayne burdick
      • [Elecraft] AM signals in SSB mode w/6 kHz filte   Brett gazdzinski
    • [Elecraft] Re: K3 AGC Adjustment Parameters   Scott Manthe
• [Elecraft] K3 AGC Adjustment Parameters   Greg - AB7R
• [Elecraft] K3 AGC Adjustment Parameters   David and Dianne on Comcast
• [Elecraft] [K3] ACC Connector   Mike Harris
  • [Elecraft] [K3] ACC Connector   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Re: K3 - keying an amp   Phil & Debbie Salas
• [Elecraft] K3 SSB TX BP Adjust   Ray Kiesel
  • [Elecraft] K3 SSB TX BP Adjust   Eric Swartz - WA6HHQ, Elecraft
    • [Elecraft] K3 SSB TX BP Adjust   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] PL-259 modification pix posted (Thanks WE0H!)   Sandy
• [Elecraft] Any K3s this weekend   Mike McCown
• [Elecraft] Re: K3 AGC Adjustment Parameters   adamkern at uchicago.edu
  • [Elecraft] Re: K3 AGC Adjustment Parameters   Vic K2VCO
    • [Elecraft] Re: K3 AGC Adjustment Parameters   wayne burdick
      • [Elecraft] [K3] CE Marking, Update Software   Toby Deinhardt
      • [Elecraft] [K3] CE Marking, Update Software   Julian G4ILO
      • [Elecraft] [K3] CE Marking, Update Software   David Pratt
      • [Elecraft] [K3] CE Marking, Update Software   Julian G4ILO
      • [Elecraft] [K3] CE Marking, Update Software   Brett gazdzinski
      • [Elecraft] [K3] CE Marking, Update Software   David Woolley
      • [Elecraft] [K3] CE Marking, Update Software   Julian G4ILO
      • [Elecraft] [K3] CE Marking, Update Software   dj7mgq at muenchen-mail.de
    • [Elecraft] Re: K3 AGC Adjustment Parameters   Doug Faunt N6TQS +1-510-655-8604
      • [Elecraft] Re: K3 AGC Adjustment Parameters   Julian G4ILO
      • [Elecraft] Re: K3 AGC Adjustment Parameters   Alexandr Kobranov
      • [Elecraft] Re: K3 AGC Adjustment Parameters   Vic K2VCO
      • [Elecraft] K3 Param editor?   Darwin, Keith
      • [Elecraft] K3 Param editor?   Simon Brown (HB9DRV)
      • [Elecraft] K3 Param editor?   Vic K2VCO
      • [Elecraft] Re: K3 AGC Adjustment Parameters   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] Mono v. Stereo Headphones?   Howard W. Ashcraft
• [Elecraft] Re: K3 AGC Adjustment Parameters   Bill Tippett
  • [Elecraft] Re: K3 AGC Adjustment Parameters   Brendan Minish
• [Elecraft] N2CQ QRP Contest Calendar: Oct 13 - Nov 11, 2007   Ken Newman
• [Elecraft] FW: K3 AGC Adjustment Parameters   Ed Muns
• [Elecraft] K3 - keying an amp   Dave G4AON
• [Elecraft] T1-K case mods....   Jonathan
• [Elecraft] ALC voltage needed at pin 15 of ACC   cw at dx.nl
• [Elecraft] What is this stuff??   n0jrn
  • [Elecraft] What is this stuff??   Roelof Bakker
  • [Elecraft] What is this stuff??   Peter PA0PJE
  • [Elecraft] What is this stuff??   n2zdb at aol.com
    • [Elecraft] What is this stuff??   Trevor Jacobs
      • [Elecraft] What is this stuff??   John Payne
  • [Elecraft] What is this stuff??   Robert Tellefsen
• [Elecraft] K3: what voltage is needed for ALC input (p.15 of ACC)   cw at dx.nl
• [Elecraft] Re: K3 AGC Adjustment Parameters   Greg - AB7R
• [Elecraft] Re: K3 - keying an amp   Joe, aa4nn
• Fw: [Elecraft] What is this stuff??   n0jrn
  • Fw: [Elecraft] What is this stuff??   KBG Luxford
    • Fw: [Elecraft] What is this stuff??   Brett gazdzinski
• [Elecraft] K3 Sideband - Clipping or Compression ?   Stewart Baker
  • [Elecraft] K3 Sideband - Clipping or Compression ?   Greg
    • [Elecraft] K3 Sideband - Clipping or Compression ?   lyle johnson
• [Elecraft] K3 Param editor?   Greg - AB7R
  • [Elecraft] K3 Param editor?   Leigh L Klotz, Jr.
• [Elecraft] OT: 40' mast on Ebay dirt cheap.   Stephen Przepiora
  • [Elecraft] OT: 40' mast on Ebay dirt cheap.   Thom LaCosta
    • [Elecraft] OT: 40' mast on Ebay dirt cheap.   Jim Sheldon
      • [Elecraft] OT: 40' mast on Ebay dirt cheap.   Robert Tellefsen
  • [Elecraft] OT: 40' mast on Ebay dirt cheap.   k4tmc at aol.com
  • [Elecraft] Re: [QRP-L] OT: 40' mast on Ebay dirt cheap.   Jim Campbell
    • [Elecraft] OT: 40' mast on Ebay dirt cheap.   Darwin, Keith
      • [Elecraft] OT: 40' mast on Ebay dirt cheap.   Darwin, Keith
      • [Elecraft] OT: 40' mast on Ebay dirt cheap.   David Ferrington, M0XDF
• [Elecraft] [K3] Building   Mike Harris
  • [Elecraft] [K3] Building   Julian G4ILO
• [Elecraft] regarding external ALC   wayne burdick
  • [Elecraft] regarding external ALC   Ham
• [Elecraft] K3 owner's manual updated (revision A3)   wayne burdick
• [Elecraft] E3 Owner's Manual Error   AE4CW at att.net
• [Elecraft] CQ K3 first run recipients in NNJ   DOUGLAS ZWIEBEL
• [Elecraft] What is this stuff??   F5UL
  • [Elecraft] What is this stuff??   Greg Beat
  • [Elecraft] KESTER "SOLID" wire solder   Greg Beat
• [Elecraft] K3 Programmer's Reference   Gordon & Lois Duff
  • [Elecraft] K3 Programmer's Reference   David Pratt
    • [Elecraft] K3 Programmer's Reference   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3: 60 metres - modes   David Pratt
  • [Elecraft] K3: 60 metres - modes   wayne burdick
• [Elecraft] [K3] Building   Julian G4ILO
• [Elecraft] K3 stupid humor follows   DOUGLAS ZWIEBEL
• [Elecraft] KAT100 Question on SWR/Operation   Lee Buller
  • [Elecraft] KAT100 Question on SWR/Operation   Thom LaCosta
  • [Elecraft] KAT100 Question on SWR/Operation   Jack Brindle
  • [Elecraft] KAT100 Question on SWR/Operation   Don Wilhelm
• [Elecraft] K3 AGC Tutorial?   cx7tt at 4email.net
• [Elecraft] K3 AGC Tutorial?   Don Rasmussen
• [Elecraft] K2: VFO stuck on 15M   JT Croteau
  • [Elecraft] K2: VFO stuck on 15M   Don Wilhelm
• [Elecraft] Can't acess KDSP2 menus...   Steve Kallal
• [Elecraft] [K3] Wine & Update Software   David Wilburn
  • [Elecraft] [K3] Wine & Update Software   Toby Deinhardt
    • [Elecraft] [K3] Wine & Update Software   Julian G4ILO
      • [Elecraft] [K3] Wine & Update Software   Vic K2VCO
      • [Elecraft] [K3] Wine & Update Software   Julian G4ILO
      • [Elecraft] [K3] Wine & Update Software   David Ferrington, M0XDF
      • [Elecraft] [K3] Wine & Update Software   Bob Nielsen
      • [Elecraft] [K3] Wine & Update Software   Ian J Maude
      • [Elecraft] [K3] Wine & Update Software   Julian G4ILO
      • [Elecraft] [K3] Wine & Update Software   Nick Lidakis
  • [Elecraft] [K3] Wine & Update Software   Leigh L. Klotz, Jr.
    • [Elecraft] [K3] Wine & Update Software   Jeff Stai
    • [Elecraft] [K3] Wine & Update Software   Jack Brindle
      • [Elecraft] [K3] Wine & Update Software   Mike S
• [Elecraft] Re: Soldering Temperature   Ian Stirling
• [Elecraft] Can't acess KDSP2 menus...   Steve Kallal
• [Elecraft] [BL1] Seems lossy in all useful configurations   David Woolley
  • [Elecraft] [BL1] Seems lossy in all useful configurations   Vic K2VCO
    • [Elecraft] [BL1] Seems lossy in all useful configurations   David Woolley
      • [Elecraft] [BL1] Seems lossy in all useful configurations   Vic K2VCO
      • [Elecraft] [BL1] Seems lossy in all useful configurations   Don Wilhelm
      • [Elecraft] [BL1] Seems lossy in all useful configurations   Ron D'Eau Claire
• [Elecraft] K3 S/N 66   Ed K1EP
• [Elecraft] K3 S/N 66   Joe, aa4nn
  • [Elecraft] K3 S/N 66   JT Croteau
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
  • [Elecraft] Elecraft CW Net Announcement   Ron Polityka
    • [Elecraft] Elecraft CW Net Announcement   Gary Bartlett VE1RGB
• [Elecraft] K2: VFO stuck on 15M   JT Croteau
  • [Elecraft] K2: VFO stuck on 15M   JT Croteau
• [Elecraft] please be considered - postings to the reflector   Andrey Stoev
  • [Elecraft] please be considered - postings to the reflector   Julian G4ILO
    • [Elecraft] please be considered - postings to the reflector   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 S/N 66   Don Rasmussen
• [Elecraft] please be considered - postings to the reflector   Dave G4AON
  • [Elecraft] please be considered - postings to the reflector   Thom LaCosta
• [Elecraft] [K3] K3 Assembly Advice/Comments   Ed K1EP
• [Elecraft] [BL1] Seems lossy in all useful configurations   N2EY at aol.com
  • [Elecraft] [BL1] Seems lossy in all useful configurations   Vic K2VCO
• [Elecraft] please be considered - postings to the reflector   Andrey Stoev
• [Elecraft] K2   bob conley
  • [Elecraft] K2   Don Wilhelm
• [Elecraft] Re: [SEDXC] Hi Tech SEDX Club Meeting   JT Croteau
  • [Elecraft] Re: [SEDXC] Hi Tech SEDX Club Meeting   JT Croteau
• [Elecraft] [K2] Is TX frequency susceptible to RF on chassis?   David Woolley
  • [Elecraft] [K2] Is TX frequency susceptible to RF on chassis?   Don Wilhelm
    • [Elecraft] [K2] Is TX frequency susceptible to RF on chassis?   David Woolley
      • [Elecraft] [K2] Is TX frequency susceptible to RF on chassis?   Don Wilhelm
      • [Elecraft] [K2] Is TX frequency susceptible to RF on chassis?   Alexander Ponomarenko
      • [Elecraft] [K2] Is TX frequency susceptible to RF on chassis?   michael taylor
    • [Elecraft] [K2] Is TX frequency susceptible to RF on chassis?   David Woolley
  • [Elecraft] [K2] Is TX frequency susceptible to RF on chassis?   Julian G4ILO
• [Elecraft] Elecraft CW Net early report   Kevin Rock
• [Elecraft] Call for Winter QRP Foxes   Larry Makoski
• [Elecraft] [K3] CW via serial cable question   vk2nu at bigpond.net.au
  • [Elecraft] [K3] CW via serial cable question   Ed Muns
  • [Elecraft] [K3] CW via serial cable question   Vic K2VCO
    • [Elecraft] [K3] CW via serial cable question   Joe Subich, W4TV
      • [Elecraft] [K3] CW via serial cable question   Julian G4ILO
  • [Elecraft] [K3] CW via serial cable question   Ed K1EP
    • [Elecraft] [K3] CW via serial cable question   Don Nesbitt
      • [Elecraft] [K3] CW via serial cable question   Ed Muns
  • [Elecraft] [K3] CW via serial cable question   Don Nesbitt
    • [Elecraft] [K3] CW via serial cable question   Julian G4ILO
      • [Elecraft] [K3] CW via serial cable question   Don Nesbitt
• [Elecraft] [K3] CW via serial cable question   vk2nu at bigpond.net.au
  • [Elecraft] [K3] CW via serial cable question   Ed Muns
    • [Elecraft] [K3] CW via serial cable question   David Douglass
      • [Elecraft] [K3] CW via serial cable question   Ed Muns
• [Elecraft] K3 15khz 2nd IF?   Brett gazdzinski
  • [Elecraft] K3 15khz 2nd IF?   n2ey at aol.com
    • [Elecraft] K3 15khz 2nd IF?   David Woolley
  • [Elecraft] K3 15khz 2nd IF?   David Toepfer
• [Elecraft] K3: Front/Bottom accessory connector usage?   Chuck Catledge
  • [Elecraft] K3: Front/Bottom accessory connector usage?   Edward Dickinson, III
    • [Elecraft] K3: Front/Bottom accessory connector usage?   Ed Muns
      • [Elecraft] K3: Front/Bottom accessory connector usage?   David Ferrington, M0XDF
  • [Elecraft] K3: Front/Bottom accessory connector usage?   Julian G4ILO
    • [Elecraft] K3: Front/Bottom accessory connector usage?   Edward Dickinson, III
• [Elecraft] K3: Front/Bottom accessory connector usage?   Greg - AB7R
  • [Elecraft] K3: Front/Bottom accessory connector usage?   Julian G4ILO
• [Elecraft] K3 question   rattray
  • [Elecraft] K3 question   Julian G4ILO
  • [Elecraft] K3 question   Ian J Maude
    • [Elecraft] K3 question   David Ferrington, M0XDF
      • [Elecraft] K3 question   rattray
• [Elecraft] Elecraft CW Net Report for October 14th & 15th, 2007   Kevin Rock
• [Elecraft] ANNOUNCEMENT: QRP-ARCI FALL QSO PARTY   Jeff Hetherington
  • [Elecraft] K2 #5723 is alive but got a few problems   KU4YP
• [Elecraft] Resolution: KPA Error 080   Joe Hetrick
• [Elecraft] FM Filter Specs?   Joe Subich, W4TV
• [Elecraft] K3: power supply for K3/100? solid suggestions?   Brian Pepperdine
  • [Elecraft] K3: power supply for K3/100? solid suggestions?   Jeff Stai
  • [Elecraft] K3: power supply for K3/100? solid suggestions?   Lee Buller
    • [Elecraft] K3: power supply for K3/100? solid suggestions?   Tony Morgan
    • [Elecraft] K3: power supply for K3/100? solid suggestions?   Paul at N4LCD.com
  • [Elecraft] K3: power supply for K3/100? solid suggestions?   Greg Beat
• [Elecraft] K160RX WANTED   BYRON ALLEN
• [Elecraft] [K3] - how option loaded can it get?   David F. Reed
  • [Elecraft] [K3] - how option loaded can it get?   Todd J Gahagan
  • [Elecraft] [K3] - how option loaded can it get?   David Ferrington, M0XDF
• [Elecraft] WA3WSJ's Place : new website!   Edward R. Breneiser
  • [Elecraft] WA3WSJ's Place : new website!   Julian G4ILO
• [Elecraft] CW: Best low cost iambic key?   Rob Lundahl
  • [Elecraft] CW: Best low cost iambic key?   Ken Kopp
  • [Elecraft] CW: Best low cost iambic key?   Fred Jensen
  • [Elecraft] CW: Best low cost iambic key?   Jeff Kinzli N6GQ
    • [Elecraft] CW: Best low cost iambic key?   John D'Ausilio
      • [Elecraft] CW: Best low cost iambic key?   Darwin, Keith
  • [Elecraft] CW: Best low cost iambic key?   Dan KB6NU
  • [Elecraft] CW: Best low cost iambic key?   John
  • [Elecraft] CW: Best low cost iambic key?   Lee Buller
  • [Elecraft] CW: Best low cost iambic key?   John [K7SVV]
  • [Elecraft] CW: Best low cost iambic key?   Michael Baker
  • [Elecraft] CW: Best low cost iambic key?   Lamb, Dick & Judy
    • [Elecraft] CW: Best low cost iambic key?   Bert Craig
• [Elecraft] Have we gone Off Track?   n4dsp
  • [Elecraft] Have we gone Off Track?   Darwin, Keith
    • [Elecraft] Have we gone Off Track?   Dave Martin
    • [Elecraft] Have we gone Off Track?   David Wilburn
      • [Elecraft] XV50: Off by 2.3 KHz   David Wilburn
    • [Elecraft] Have we gone Off Track?   Fred Jensen
    • [Elecraft] Have we gone Off Track?   Julian G4ILO
• [Elecraft] K2 - DSP - Impressive   David Wilburn
  • [Elecraft] K2 - DSP - Impressive   Steve Kallal
• FW: [Elecraft] CW: Best low cost iambic key?   RJD
  • FW: [Elecraft] CW: Best low cost iambic key?   David Wilburn
• [Elecraft] K3 Time?   Don Rasmussen
  • [Elecraft] K3 Time?   Gary D Krause
• [Elecraft] CW: Best low cost iambic key?   David Woolley
• [Elecraft] [K3] clarification on VFO and 2nd Rx   David Ferrington, M0XDF
  • [Elecraft] [K3] clarification on VFO and 2nd Rx   Don Wilhelm
    • [Elecraft] [K3] clarification on VFO and 2nd Rx   David Ferrington, M0XDF
    • [Elecraft] [K3] clarification on VFO and 2nd Rx - erratum   David Ferrington, M0XDF
      • [Elecraft] [K3] clarification on VFO and 2nd Rx - erratum   Don Wilhelm
    • [Elecraft] [K3] clarification on VFO and 2nd Rx   Vic K2VCO
      • [Elecraft] [K3] clarification on VFO and 2nd Rx   Bob Cunnings
• [Elecraft] [K3] clarification on VFO and 2nd Rx   Barry N1EU
  • [Elecraft] [K3] clarification on VFO and 2nd Rx   David Ferrington, M0XDF
    • [Elecraft] [K3] clarification on VFO and 2nd Rx   Barry N1EU
• [Elecraft] Iambic keys   JACrux
• [Elecraft] RE: CW: Best low cost iambic key   Joe Hetrick
  • [Elecraft] RE: CW: Best low cost iambic key   RJD
• [Elecraft] how about a touch key?   rlpend
• [Elecraft] off topic, Wanted Yaesu SP5 with Timewave dsp   Ed Rodriguez
• [Elecraft] CW: Best low cost iambic key?   Clark Macaulay
  • [Elecraft] CW: Best low cost iambic key?   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] CW Net Announcement   wd4lst at windstream.net
• [Elecraft] Re: K3: power supply for K3/100?   Benny Aumala
• FW: [Elecraft] CW: Best low cost iambic key?   Jerry T. Dowell
• [Elecraft] Re: CW: Best low cost iambic key?   Benny Aumala
• [Elecraft] CW: Best low cost iambic key?   Paul at N4LCD.com
• [Elecraft] [K2] No RTTY Output   Ken Alexander
  • [Elecraft] [K2] No RTTY Output   Don Wilhelm
    • [Elecraft] [K2] No RTTY Output   Ken Alexander
• [Elecraft] Jota   Richard Kent
  • [Elecraft] Jota   Jon Robert Pellant
• [Elecraft] [K2] K2/100 - where does all the hot air go?   Stephen Prior
  • [Elecraft] [K2] K2/100 - where does all the hot air go?   Darwin, Keith
    • [Elecraft] [K2] Problem with MH2 and K2/100   jmalloy
      • [Elecraft] [K2] Problem with MH2 and K2/100   Don Wilhelm
    • [Elecraft] [K2] K2/100 - where does all the hot air go?   Stephen Prior
  • [Elecraft] [K2] K2/100 - where does all the hot air go?   Don Wilhelm
• [Elecraft] XV50: Off by 2.3 KHz   JT Croteau
  • [Elecraft] XV50: Off by 2.3 KHz   James C. Hall, MD
  • [Elecraft] XV50: Off by 2.3 KHz   Ken K3IU
• [Elecraft] K3 Wiki   Don Rasmussen
  • [Elecraft] K3 Wiki   David Ferrington, M0XDF
  • [Elecraft] K3 Wiki   Thom LaCosta
    • [Elecraft] K3 Wiki   lyle johnson
      • [Elecraft] K3 Wiki   David Ferrington, M0XDF
• [Elecraft] Have we gone Off Track?   Ralph Tyrrell
• [Elecraft] Re: CW: Best low cost iambic key?   Ken Miller, K6CTW
• [Elecraft] RE: CW: Best low cost iambic key   Arnie Grubbs
• [Elecraft] T1 connections/Fridge Full of Beer   Jonathan
  • [Elecraft] T1 connections   Don Wilhelm
• [Elecraft] Very Sad News   J F
• [Elecraft] K3 with Yaesu Quadra?   Joe Subich, W4TV
  • [Elecraft] K3 with Yaesu Quadra?   David Ferrington, M0XDF
    • [Elecraft] K3 with Yaesu Quadra?   Dave Martin
      • [Elecraft] K3 with Yaesu Quadra?   Craig
• [Elecraft] K3 with Yaesu Quadra?   Dave G4AON
• [Elecraft] External speaker jack K2   Matt Palmer
  • [Elecraft] External speaker jack K2   James C. Hall, MD
  • [Elecraft] External speaker jack K2   David Woolley
• [Elecraft] Summary of iambic key websites   Roger Stein
• [Elecraft] [XG-2] A little help with math   Ken Bessler
  • [Elecraft] [XG-2] A little help with math   Don Wilhelm
• [Elecraft] [K3] The Wait is A Little Easier   k4tmc at aol.com
  • [Elecraft] Re: [K3] The Wait is A Little Easier   wayne burdick
• [Elecraft] K3 Option Manuals up on Web Page   Eric Swartz - WA6HHQ, Elecraft
  • [Elecraft] K3 Option Manuals up on Web Page   Brett gazdzinski
    • [Elecraft] K3 Option Manuals up on Web Page   Ron D'Eau Claire
• [Elecraft] (K3) RSGB HF convention - Eric WA6HHQ   Robert Allbright
  • [Elecraft] (K3) RSGB HF convention - Eric WA6HHQ   Julian G4ILO
    • [Elecraft] (K3) RSGB HF convention - Eric WA6HHQ   David Ferrington, M0XDF
      • [Elecraft] K3 Porch Watch 2007   Craig Rairdin
• [Elecraft] K3 Porch Watch 2007   Don Rasmussen
  • [Elecraft] K3 Build   Ed Muns
    • [Elecraft] K3 Build   Stan Rife
• [Elecraft] [K3] Missing from Wikipedia Entry   Jeff T. Casey
  • [Elecraft] [K3] Missing from Wikipedia Entry   Clark B. Wierda
  • [Elecraft] [K3] Missing from Wikipedia Entry   David Woolley
• [Elecraft] RE: K3 Build [now ... Screw Counts]   Ed Muns
• [Elecraft] W1FB Tuna Tin Circuit   Andy - GM0NWI
  • [Elecraft] W1FB Tuna Tin Circuit   Joe Subich, W4TV
    • [Elecraft] W1FB Tuna Tin Circuit   Ken Kopp
• [Elecraft] W1FB Tuna Tin Circuit FOUND   Andy - GM0NWI
• [Elecraft] WTB   jpgabbard
• [Elecraft] K3 Status Update - 10/17/2007   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] test   Joe Fowler
• [Elecraft] Sidetone   Joe Fowler
  • [Elecraft] Sidetone   Don Wilhelm
• [Elecraft] OT: W1FB Tuna Tin Circuit   AJSOENKE at aol.com
• [Elecraft] OT: News Article on "Tin Whiskers" Ruining Electronics   Dick & Judy Lamb
  • [Elecraft] OT: News Article on "Tin Whiskers" Ruining Electronics   Don Wilhelm
    • [Elecraft] OT: News Article on "Tin Whiskers" Ruining Electronics   Mike S
      • [Elecraft] OT: News Article on "Tin Whiskers" Ruining Electronics   Don Wilhelm
      • [Elecraft] OT: News Article on "Tin Whiskers" Ruining Electronics   Matt Palmer
      • [Elecraft] OT: News Article on "Tin Whiskers" Ruining Electronics   Don Wilhelm
• [Elecraft] K3 SO2R   Ed Muns
• [Elecraft] [OT] Software for Learning Morse Code   Corboy-Poteet
  • [Elecraft] [OT] Software for Learning Morse Code   Ian J Maude
    • [Elecraft] [OT] Software for Learning Morse Code   Dan KB6NU
  • [Elecraft] [OT] Software for Learning Morse Code   Julian G4ILO
  • [Elecraft] [OT] Software for Learning Morse Code   David Ferrington, M0XDF
  • [Elecraft] [OT] Software for Learning Morse Code   Brendan Minish
  • [Elecraft] [OT] Software for Learning Morse Code   Andrey Stoev
  • [Elecraft] [OT] Software for Learning Morse Code   David Wilburn
• [Elecraft] [K3} K3's on the air   Ed K1EP
• [Elecraft] OT: News Article on "Tin Whiskers" Ruining Electronics   N2EY at aol.com
• [Elecraft] K2/K3 Scientific Attention to Detail   Bill Tippett
  • [Elecraft] K2/K3 Scientific Attention to Detail   Julian G4ILO
  • [Elecraft] K2/K3 Scientific Attention to Detail   David Woolley
• [Elecraft] KAT2: Can't Get Bridge Null Adjustment (C55) Below 012 mV   Michael Linden
  • [Elecraft] KAT2: Can't Get Bridge Null Adjustment (C55) Below 012 mV   Julian G4ILO
  • [Elecraft] KAT2: Can't Get Bridge Null Adjustment (C55) Below 012 mV   Don Wilhelm
• [Elecraft] Re: [OT] Software for Learning Morse Code   Chris Kantarjiev
• [Elecraft] OT - Two learnig the code tips   Ken Kopp
  • [Elecraft] OT - Two learnig the code tips   Ian Stirling
    • [Elecraft] OT - Two learnig the code tips   Ian Stirling
• [Elecraft] [OT] Software for Learning Morse Code   ae6gc at sbcglobal.net
• [Elecraft] ** KX1 K1 K2 and K3, What the hecks a Wiki? **   Don Rasmussen
• [Elecraft] W1: Extending Range to cover 50 MHz   JT Croteau
• [Elecraft] OT: News Article on "Tin Whiskers" Ruining Electronics   d.cutter at ntlworld.com
• [Elecraft] OT - Two learnig the code tips   d.cutter at ntlworld.com
• [Elecraft] [K2] : s/n 5,636 on the air   Raymond METZGER
• [Elecraft] OT: tin whiskers videos   DOUGLAS ZWIEBEL
• [Elecraft] OT: re 2 learning the code tips   DOUGLAS ZWIEBEL
  • [Elecraft] first K2 problem   f6dro
    • [Elecraft] first K2 problem   Don Wilhelm
    • [Elecraft] first K2 problem   Tom Arntzen
• [Elecraft] Morse code trainers   rlpend
• [Elecraft] XV50: Birdie Problem   JT Croteau
• [Elecraft] Just Wonderin'...   Andy - GM0NWI
  • [Elecraft] Just Wonderin'...   Ed Lambert
  • [Elecraft] Just Wonderin'...   Ed Lambert
  • [Elecraft] Just Wonderin'...   John A. Ross [Ecraft]
• [Elecraft] [K3] Pacificon Elecraft Pix   Leigh L Klotz, Jr.
• [Elecraft] Just Wonderin'...   w6jd at comcast.net
  • [Elecraft] Just Wonderin'...   Robert Dorchuck W6VY
    • [Elecraft] Just Wonderin'...   rrkrr
      • [Elecraft] Just Wonderin'...   peter gerba
  • [Elecraft] Just Wonderin'...   peter gerba
• [Elecraft] N2CQ QRP Contest Calendar: Oct 20 - Nov 19, 2007   Ken Newman
• [Elecraft] October RFTB   Larry Makoski
• [Elecraft] Elecraft CW Net on hold unless ...   Kevin Rock
• [Elecraft] first K2 problem   lbailey at aep.com
• [Elecraft] [K2] Spectrum analyzer plots for K1 and K2   Dave G4AON
• [Elecraft] [K2] Frequency Counter Gate Time Short   David Woolley
  • [Elecraft] [K2] Frequency Counter Gate Time Short   Don Wilhelm
• [Elecraft] K2 - DSP - Impressive   David Wilburn
  • [Elecraft] K2 - DSP - Impressive   Steve Kallal
  • [Elecraft] K2 - DSP - Impressive   Stewart Baker
• [Elecraft] New Polar Bear Season   Ron Polityka
• [Elecraft] K2 "strange" Rx tuning effect   Denis Jackson
  • [Elecraft] K2 "strange" Rx tuning effect   Don Wilhelm
• [Elecraft] OT: WTB 2030 and MMR-40   Chris Wagner
• [Elecraft] K2 - DSP - Impressive   David Wilburn
  • [Elecraft] K2 - DSP - Impressive   johnny
• [Elecraft] Just Wonderin'...   John A. Ross [Ecraft]
• [Elecraft] My K3 was delivered yesterday   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] For Sale: XV50   JT Croteau
  • [Elecraft] Re: For Sale: XV50   JT Croteau
• [Elecraft] K3 Question   Edward Dickinson, III
  • [Elecraft] K3 Question   Vic K2VCO
• [Elecraft] My K3 was delivered yesterday   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] [K2] AF Gain Control   KBG Luxford
  • [Elecraft] [K2] AF Gain Control   David Woolley
    • [Elecraft] [K2] AF Gain Control   KBG Luxford
• [Elecraft] K2 Problem and new elecraft kit proposal   f6dro
  • [Elecraft] K2 Problem and new elecraft kit proposal   Craig Rairdin
    • [Elecraft] K2 Problem and new elecraft kit proposal   Darwin, Keith
      • [Elecraft] K2 Problem and new elecraft kit proposal   John D'Ausilio
      • [Elecraft] K2 Problem and new elecraft kit proposal   Robert Lupo
• [Elecraft]K2 Problem and new elecraft.kit.proposal   Bryan
  • [Elecraft]K2 Problem and new elecraft.kit.proposal   John Payne
• [Elecraft]K2 Problem and new elecraft,ki.propasal   Bryan
• [Elecraft] My K3 was delivered yesterday   Don Rasmussen
  • [Elecraft] My K3 was delivered yesterday   Vic K2VCO
    • [Elecraft] My K3 was delivered yesterday   Thom LaCosta
• [Elecraft] (no subject)   Radio
  • [Elecraft] Re: RFC15 &C91   Denis Jackson
• [Elecraft] No Sun Spot DX   W7is at aol.com
  • [Elecraft] No Sun Spot DX   Tree
  • [Elecraft] No Sun Spot DX   Gary D Krause
    • [Elecraft] No Sun Spot DX   Ron Polityka
      • [Elecraft] No Sun Spot DX   Julian G4ILO
      • [Elecraft] No Sun Spot DX   Paul Fletcher
  • [Elecraft] No Sun Spot DX   Bill W5WVO
    • [Elecraft] No Sun Spot DX -- QSL Cards!   Mark J. Schreiner
• [Elecraft] K3 review   Gary D Krause
• [Elecraft] My K3 was delivered yesterday   Greg - AB7R
• [Elecraft] OT -- San Diego wild fires   wayne burdick
  • [Elecraft] OT -- San Diego wild fires   Thom LaCosta
  • [Elecraft] OT -- San Diego wild fires   Leigh L Klotz, Jr.
    • [Elecraft] OT -- San Diego wild fires   Bruce Osterberg
• [Elecraft] no spots? just wait until the weekend!   DOUGLAS ZWIEBEL
• [Elecraft] Re: For Sale: XV50   JT Croteau
• [Elecraft] [KX1] Sunspotless QRP/P mojo   Michael Madden
• [Elecraft] fires   Robert Paull
• [Elecraft] K2 Problem and new elecraft kit proposal   VR2BrettGraham
• [Elecraft] K2 still got the mojo   J F
• [Elecraft] [KX1] Sunspotless QRP/P mojo‏   Bob Waddell
• [Elecraft] RE K2 Problem and new elecraft kit proposal   David N.
  • [Elecraft] RE K2 Problem and new elecraft kit proposal   bob conley
• [Elecraft] RE K2 Problem and new elecraft kit proposal   Dominique DEHAYS
  • [Elecraft] RE K2 Problem and new elecraft kit proposal   Mike Harris
• [Elecraft] Why a K3?   KU4YP
  • [Elecraft] Why a K3?   Julian G4ILO
  • [Elecraft] Why a K3?   Brett gazdzinski
• [Elecraft] Why a K3?   Joe, aa4nn
• [Elecraft] k3 on fire?   Brett gazdzinski
  • [Elecraft] k3 on fire?   Julian G4ILO
    • [Elecraft] k3 on fire?   Kenneth E. Harker
      • [Elecraft] k3 on fire?   Brett gazdzinski
      • [Elecraft] k3 on fire?   Eric Swartz - WA6HHQ, Elecraft
  • [Elecraft] k3 on fire?   Doug Faunt N6TQS +1-510-655-8604
  • [Elecraft] k3 on fire?   Fred Jensen
• [Elecraft] K2 still got the mojo   J F
• [Elecraft] MOJO   Benny Aumala
• [Elecraft] k3 on fire?   Richard Hill
• [Elecraft] k3 on fire?   Don Rasmussen
  • [Elecraft] k3 on fire?   Richard HIll
    • [Elecraft] k3 on fire?   Thom LaCosta
• [Elecraft] k3 on fire?   Don Rasmussen
• [Elecraft] K3: supplied power cable specs?   Mike B
  • [Elecraft] K3: supplied power cable specs?   Eric Swartz - WA6HHQ, Elecraft
    • [Elecraft] K3: supplied power cable specs?   k4tmc at aol.com
      • [Elecraft] K3: supplied power cable specs?   Dave Martin
      • [Elecraft] K3: supplied power cable specs?   KBG Luxford
      • [Elecraft] K3: supplied power cable specs?   Jay Rutherford
      • [Elecraft] K3: supplied power cable specs?   Darwin, Keith
      • [Elecraft] K3: supplied power cable specs?   Tom Hammond
      • [Elecraft] K3: supplied power cable specs?   Bill Coleman N2BC
      • [Elecraft] K3: supplied power cable specs?   Ed Muns
      • [Elecraft] K3: supplied power cable specs?   Doug Faunt N6TQS +1-510-655-8604
      • [Elecraft] K3: supplied power cable specs?   David Ferrington, M0XDF
      • [Elecraft] K3: supplied power cable specs?   Ken K3IU
      • [Elecraft] K3: supplied power cable specs?   David Ferrington, M0XDF
      • [Elecraft] K3: supplied power cable specs?   Doug Faunt N6TQS +1-510-655-8604
      • [Elecraft] K3: supplied power cable specs?   Ed Muns
      • [Elecraft] K3: supplied power cable specs?   Doug Faunt N6TQS +1-510-655-8604
      • [Elecraft] K3: supplied power cable specs?   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] OT -- San Diego wild fires   Don Rasmussen
• [Elecraft] proposal: why not design a monoband CW/SSB QRP TRX   Chris Wagner
  • [Elecraft] proposal: why not design a monoband CW/SSB QRP TRX   Rick Dettinger
    • [Elecraft] proposal: why not design a monoband CW/SSB QRP TRX   Brett gazdzinski
      • [Elecraft] proposal: why not design a monoband CW/SSB QRP TRX   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] K3 & KRC2   John Reilly
  • [Elecraft] Re: K3 & KRC2   wayne burdick
    • [Elecraft] Re: K3 & KRC2   Jack Brindle
      • [Elecraft] Re: K3 & KRC2   Darrell Bellerive
      • [Elecraft] Re: K3 & KRC2   Jack Brindle
  • [Elecraft] K3 & KRC2   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] Vermin   Jeremiah McCarthy
• [Elecraft] Re:Elecraft K2 Two problems   Bryan
• [Elecraft] Re:Elecraft K2 Two problems   garyhvizdak at cfl.rr.com
• [Elecraft] K3: supplied power cable specs?   Bill Tippett
  • [Elecraft] K3: supplied power cable specs? [END of THREAD]   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Polar Bear QRP Hunt!   Edward R. Breneiser
• [Elecraft] The white box   w6jd at comcast.net
  • [Elecraft] The white box   James C. Hall, MD
• [Elecraft] [K3] Unanswered Questions ...   Joe Subich, W4TV
• [Elecraft] Videos   Luis E Aguilar
• [Elecraft] [K3] Unanswered Questions ...   Greg - AB7R
  • [Elecraft] [K3] Unanswered Questions ...   Joe Subich, W4TV
    • [Elecraft] [K3] Unanswered Questions ...   Lyle Johnson
      • [Elecraft] [K3] Unanswered Questions ...   Joe Subich, W4TV
      • [Elecraft] [K3] Unanswered Questions ...   Lyle Johnson
      • [Elecraft] [K3] Unanswered Questions ...   Joe Subich, W4TV
• [Elecraft] The white box   James C. Hall, MD
  • [Elecraft] The white box   David Ferrington, M0XDF
• [Elecraft] The white box   Don Rasmussen
  • [Elecraft] The white box   hank k8dd
• [Elecraft] OT: DSP linked to schizophrenia   DOUGLAS ZWIEBEL
  • [Elecraft] OT: DSP linked to schizophrenia   Doug Faunt N6TQS +1-510-655-8604
  • [Elecraft] OT: DSP linked to schizophrenia   Joe Subich, W4TV
    • [Elecraft] OT: DSP linked to schizophrenia   Carl Clawson
      • [Elecraft] OT: DSP linked to schizophrenia   Robert Brigham
  • [Elecraft] OT: DSP linked to schizophrenia   Tom Hammond
    • [Elecraft] OT: DSP linked to schizophrenia   michael taylor
    • [Elecraft] OT: DSP linked to schizophrenia   Ron D'Eau Claire
      • [Elecraft] OT: DSP linked to schizophrenia   Ralph Tyrrell
• [Elecraft] KAT2 Query   Matt Palmer
• PS: [Elecraft] Re:Elecraft K2 Two problems   Gary Hvizdak
• [Elecraft] Re:Elecraft K2 Two problems   Bryan
• [Elecraft] K3 - Assembly Manual Errata A-4   David Pratt
  • [Elecraft] Re: K3 - Assembly Manual Errata A-4   wayne burdick
  • [Elecraft] K3 - Assembly Manual Errata A-4   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Soldering APP's   Jeremiah McCarthy
• [Elecraft] Kit or Assembled?   Rick Tavan N6XI
  • [Elecraft] Kit or Assembled?   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] [K3] Speaker magnetic shield sticky pad?   Dave G4AON
  • [Elecraft] [K3] Speaker magnetic shield sticky pad?   Edward Dickinson, III
  • [Elecraft] [K3] Speaker magnetic shield sticky pad?   Don Wilhelm
• [Elecraft] K3 Rev B owners manual on web page   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 scanning   Tom Hall
• [Elecraft] N2CQ QRP Contest Calendar: Oct 27 - Nov 24 2007   Ken Newman
• [Elecraft] how to run KAT100 and control software - re. two control cables   Brian Pepperdine
  • [Elecraft] how to run KAT100 and control software - re. two controlcables   Mike Heitmann
    • [Elecraft] how to run KAT100 and control software re. two control cables   Brian Pepperdine
• [Elecraft] CW: Best low cost iambic key?   Nick Waterman
• [Elecraft] O-T(Three-Legged Antenna)   Thom LaCosta
• [Elecraft] recommendation of a low cost iambic paddle / Beengali Simplex shipping with gold contacts   Chris Wagner
  • [Elecraft] recommendation of a low cost iambic paddle / Beengali Simplex shipping with gold contacts   Vic K2VCO
    • [Elecraft] recommendation of a low cost iambic paddle / BeengaliSimplex shipping with gold contacts   Joe Subich, W4TV
      • [Elecraft] recommendation of a low cost iambic paddle / BeengaliSimplex shipping with gold contacts   Rich Ardolino
    • [Elecraft] recommendation of a low cost iambic paddle / BeengaliSimplex shipping with gold contacts   Joe-aa4nn
      • [Elecraft] recommendation of a low cost iambic paddle / BeengaliSimplex shipping with gold contacts   Paul at N4LCD.com
• [Elecraft] [K3}AM Receive BW   Joel R. Hallas
  • [Elecraft] [K3}AM Receive BW   Lyle Johnson
    • [Elecraft] [K3}AM Receive BW   Eric Swartz - WA6HHQ, Elecraft
      • [Elecraft] Re: [K3] AM Receive BW w/FM filter is OK   wayne burdick
      • [Elecraft] Re: [K3] AM Receive BW w/FM filter is OK   Bill NY9H
• [Elecraft] [K3] Tune with dits feature desired   Carl Clawson
  • [Elecraft] [K3] Tune with dits feature desired   Ed Muns
• [Elecraft] KPA100 Problem   Jim Stoneback
  • [Elecraft] K2 power control loop damping (was 'KPA100 Problem')   Don Wilhelm
• [Elecraft] [K3}AM Receive BW   Greg - AB7R
• [Elecraft] PC Boards   Matt Palmer
  • [Elecraft] PC Boards   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 KFL3B-FM Change?   Joe Subich, W4TV
  • [Elecraft] K3 KFL3B-FM Change?   Eric Swartz - WA6HHQ, Elecraft
    • [Elecraft] K3 KFL3B-FM Change?   Joe Subich, W4TV
      • [Elecraft] K3 KFL3B-FM Change?   Eric Swartz - WA6HHQ, Elecraft
      • [Elecraft] K3 KFL3B-FM Change?   Brett gazdzinski
      • [Elecraft] K3 KFL3B-FM Change?   David Woolley
• [Elecraft] [K3] @ Tokyo Ham Fair   Steve Sacco NN4X
  • [Elecraft] [K3] @ Tokyo Ham Fair   Thom LaCosta
• [Elecraft] Pactor I via soundcard   Phil Kane
  • [Elecraft] Pactor I via soundcard   R. Kevin Stover
    • [Elecraft] Pactor I via soundcard   Rick Kunath
      • [Elecraft] Pactor I via soundcard   Phil Kane
    • [Elecraft] Pactor I via soundcard   Lyle Johnson
      • [Elecraft] Pactor I via soundcard   Phil Kane
    • [Elecraft] Pactor I via soundcard   Phil Kane
      • [Elecraft] Pactor I via soundcard   Dr. Werner Furlan
• [Elecraft] [K3] at Tokyo Ham Fair   Don Rasmussen
• [Elecraft] P.S.: Bengali Simplex gold plated paddles might be negotiated at the normal contact price when rush order is needed   Chris Wagner
• [Elecraft] QQ arrived   Dale Putnam
  • [Elecraft] Re: [Qrp-Z] QQ arrived   hank k8dd
• [Elecraft] SWR Question   Bob Fish
  • [Elecraft] SWR Question   Vic K2VCO
• [Elecraft] K3 s/n surface report   Matt Zilmer
• [Elecraft] k3 s/n surface report   Matt Zilmer
• [Elecraft] K3 #27   Jeff Stai
• [Elecraft] FS: Elecraft K2 (15W, tuner, NB, AF) $695   Andrew Moore
  • [Elecraft] Re: FS: Elecraft K2 (15W, tuner, NB, AF) $695   Andrew Moore
    • [Elecraft] K3 Mojo   Ron D'Eau Claire
• [Elecraft] K2 power output/power on Oddidity   Will
• [Elecraft] Elecraft] K3 #27   Don Rasmussen
• [Elecraft] First time to hear K3 sigs   a.yoshida
  • [Elecraft] First time to hear K3 sigs   Vic K2VCO
    • [Elecraft] First time to hear K3 sigs   a.yoshida
• [Elecraft] WTB   jpgabbard
• [Elecraft] K3: who are the FTers and how many have been shipped?   DOUGLAS ZWIEBEL
• [Elecraft] K3: one more FT   DOUGLAS ZWIEBEL
• [Elecraft] KPA100 capacitor question   Dr. Werner Furlan
  • [Elecraft] KPA100 capacitor question   Don Wilhelm
    • [Elecraft] KPA100 capacitor question   Dr. Werner Furlan
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft CW Net Report for October 21st & 22nd, 2007   Kevin Rock
• [Elecraft] K2 Ser 6160 lives but............   Denis Jackson
  • [Elecraft] K2 Ser 6160 lives but............   Don Wilhelm
• [Elecraft] K2 Ser 6160 lives but.   Dave G4AON
  • [Elecraft] K2 Ser 6160 lives but.   Denis Jackson
• [Elecraft] [K3] Help for suggested IF buffer amplifier   Paul Fletcher
• [Elecraft] [K2] manual versions: rev. F w/ errata F-12 vs. rev. G   michael taylor
• [Elecraft] Elecraft CW Net Report for October 28th & 29th, 2007   Kevin Rock
• [Elecraft] Elcraft K2 6216, Problem with Voltage Sensor on Control Board   Dianne & Richard Gething
  • [Elecraft] Elcraft K2 6216, Problem with Voltage Sensor on Control Board   Don Wilhelm
• [Elecraft] [K3] K3, P3E, Transverters (Satellites)   Simon Brown (HB9DRV)
  • [Elecraft] [K3] K3, P3E, Transverters (Satellites)   Lyle Johnson
    • [Elecraft] [K3] K3, P3E, Transverters (Satellites)   michael taylor
      • [Elecraft] [K3] K3, P3E, Transverters (Satellites)   Lyle Johnson
      • [Elecraft] [K3] K3, P3E, Transverters (Satellites)   Samuel Strongin
      • [Elecraft] [K3] K3, P3E, Transverters (Satellites)   Simon Brown (HB9DRV)
• [Elecraft] Test   Ruchan Ozatay
• [Elecraft] US Postal Service Express Mail to UK - rubbish!   Dave G4AON
  • [Elecraft] US Postal Service Express Mail to UK - rubbish!   Ken Kopp
    • [Elecraft] US Postal Service Express Mail to UK - rubbish!   Dave G4AON
  • [Elecraft] US Postal Service Express Mail to UK - rubbish!   Stephen Prior
• [Elecraft] Question: Over-voltage protection (OVP) for K2, K1   Alan D. Wilcox
  • [Elecraft] Question: Over-voltage protection (OVP) for K2, K1   Matt Palmer
• [Elecraft] US Postal Service Express Mail to UK - rubbish!   Phil Kane
• [Elecraft] US Postal Service Express Mail to UK - rubbish!   David Lankshear
• [Elecraft]US Postal Service Express Mail to the UK -Rubbish!   Bryan
  • [Elecraft]US Postal Service Express Mail to the UK -Rubbish!   G3SJJ
• [Elecraft] K3 Rev B manuals on Web PAge   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Question: Over-voltage protection (OVP) for K2, K1   David Lankshear
  • [Elecraft] Question: Over-voltage protection (OVP) for K2, K1   Alan D. Wilcox
• [Elecraft] K3 Rev B manuals on Web PAge   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] k3support(at)elecraft.com   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] [K1] Spectrogram Question   Clark Macaulay
  • [Elecraft] [K1] Spectrogram Question   Don Wilhelm
• [Elecraft] K3: Reference Error in KXV3 Manual   Chuck Catledge
  • [Elecraft] RE: K3: Reference Error in KXV3 Manual   AB7R
• [Elecraft] KPA800 / KPA1500: status update?   Andrey Stoev
  • [Elecraft] KPA800 / KPA1500: status update?   Nick Waterman
    • [Elecraft] KPA800 / KPA1500: status update?   Vic K2VCO
      • [Elecraft] KPA800 / KPA1500: status update?   David Wilburn
      • [Elecraft] KPA800 / KPA1500: status update?   Eric Swartz - WA6HHQ, Elecraft
    • [Elecraft] KPA800 / KPA1500: status update?   Darwin, Keith
• [Elecraft] Alignment/Test II assistance request   rcerkon at gmail.com
  • [Elecraft] Alignment/Test II assistance request   Don Wilhelm
  • [Elecraft] Re: Alignment/Test II assistance request   rcerkon at gmail.com
• [Elecraft] K3 - very brief first impressions...   Jeff Stai
  • [Elecraft] K3 - very brief first impressions...   David Ferrington, M0XDF
    • [Elecraft] K3 - very brief first impressions...   Jeff Stai
  • [Elecraft] K3 - very brief first impressions...   David Ferrington, M0XDF
    • [Elecraft] K3 - very brief first impressions...   Jeff Stai
      • [Elecraft] K3 - very brief first impressions...   David Ferrington, M0XDF
  • [Elecraft] K3 - very brief first impressions...   Jeff Stai
  • [Elecraft] K3 - very brief first impressions...   Fred Jensen
    • [Elecraft] K3 - very brief first impressions...   Jeff Stai
• [Elecraft] Test   Kenneth Moorman
• [Elecraft] Question: Over-voltage protection (OVP) for K2, K1   Alan D. Wilcox
• [Elecraft] Re: [K1] Spectrogram Question   Mike Morrow
• [Elecraft] Question: Over-voltage protection (OVP) for K2, K1   Brian Kassel
  • [Elecraft] Question: Over-voltage protection (OVP) for K2, K1   Alan D. Wilcox
• [Elecraft] K3 - very brief first impressions...   Greg - AB7R
  • [Elecraft] K3 - very brief first impressions...   David Ferrington, M0XDF
• [Elecraft] N2CQ QRP Contest Calendar: Nov 2007   Ken Newman
  • [Elecraft] [K2] DC Input (was:N2CQ QRP Contest Calendar: Nov 2007)   David Woolley
    • [Elecraft] [K2] DC Input (was:N2CQ QRP Contest Calendar: Nov 2007)   Paul Fletcher
• [Elecraft] Mic selection (was K3 - very brief first impressions)   Barry N1EU
  • [Elecraft] Mic selection (was K3 - very brief first impressions)   David Ferrington, M0XDF
• [Elecraft]US Postal Service Express Mail to the UK - update   Dave G4AON
  • [Elecraft]US Postal Service Express Mail to the UK - update   Julian G4ILO
    • [Elecraft]US Postal Service Express Mail to the UK - update   Vic K2VCO
  • [Elecraft]US Postal Service Express Mail to the UK - update   Karl Anderson
    • [Elecraft]US Postal Service Express Mail to the UK - update   Don Wilhelm
• [Elecraft] I NEED HELP WITH MY K1   Len [K4IWL]
• [Elecraft]US Postal Service Express Mail to the UK - update   Bill Tippett
• [Elecraft] K3 Second run   Jeff Kinzli N6GQ
• [Elecraft] OT: Nov/Dec NCJ out..."the Elecraft issue?"   DOUGLAS ZWIEBEL
  • [Elecraft] OT: Nov/Dec NCJ out..."the Elecraft issue?"   Thom LaCosta
• [Elecraft] test message   Gary E Norman
• [Elecraft] The K3 in J3   Ed K1EP
• [Elecraft] K1 PROBLEM SOLVED!!!   Len [K4IWL]
• [Elecraft] 5.6 Earthquake very close to San Jose   Kevin Rock
  • [Elecraft] 5.6 Earthquake very close to San Jose   Jeff Kinzli N6GQ
    • [Elecraft] 5.6 Earthquake very close to San Jose   Ron D'Eau Claire
  • [Elecraft] 5.6 Earthquake very close to San Jose   Jack Brindle
• [Elecraft] 5.6 Earthquake very close to San Jose   Kevin Rock
  • [Elecraft] 5.6 Earthquake very close to San Jose   Phil Kane
• [Elecraft] Re: [K3] Second Run   vk2nu at bigpond.net.au
  • [Elecraft] [K3] Second Run   Don Ehrlich
• [Elecraft] Re: [K3] Second Run   Dave G4AON
• [Elecraft] K3 Deliveries   Nick Henwood
  • [Elecraft] K3 Deliveries   Stewart Baker
    • [Elecraft] K3 Deliveries   David Pratt
    • [Elecraft] K3 Deliveries   Julian G4ILO
      • [Elecraft] K3 Deliveries   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] OT: Problem With COX.NET deliveries   Ken K3IU
• [Elecraft] Re: [K3] Second Run   David Douglass
• [Elecraft] (K2) PROBLEM WITH SSB   Michael van Hauten
  • [Elecraft] (K2) PROBLEM WITH SSB   Don Wilhelm
• [Elecraft] Automatic Power Of Switch   J F
• [Elecraft] It's Halloween, and you KNOW what that means. Yep, it's W0O at Frankenstein   Tom Hammond
  • [Elecraft] It's Halloween, and you KNOW what that means. Yep, it's W0O at Frankenstein   Ron Polityka
• [Elecraft] OT- Good News! - Hollingsworth to Stay Put   Ken Kopp
• [Elecraft] F/S multiple items   rcerkon at gmail.com
  • [Elecraft] F/S multiple items   Tom Hammond
    • [Elecraft] F/S multiple items   michael taylor
  • [Elecraft] Re: F/S multiple items   rcerkon at gmail.com
  • [Elecraft] Re: F/S multiple items   rcerkon at gmail.com
    • [Elecraft] Re: F/S multiple items   rcerkon at gmail.com
• [Elecraft] K2 -- RX audio   Marteinn Sverrisson
• [Elecraft] K3 S/N 25 arrives   Craig Rairdin
  • [Elecraft] K3 S/N 25 arrives   Mike Harris
• [Elecraft] Egg Crates   Bill Tippett
  • [Elecraft] Egg Crates   k4tmc at aol.com
    • [Elecraft] Egg Crates   Ed K1EP
      • [Elecraft] Egg Crates   Craig Rairdin
      • [Elecraft] Egg Crates   Edward Dickinson, III
    • [Elecraft] Egg Crates   Bill Tippett
• [Elecraft] Interesting K3 Pan Adapter Development   hank k8dd
• [Elecraft] W0o at 2026z on 14040 kHz   Kevin Rock
• [Elecraft] K3 S/N 25 arrives   N2EY at aol.com
• [Elecraft] Wanted: KFL1-2 Additional 2-Band Filter Module for K1   Jim Larsen - AL7FS
• [Elecraft] K3 Status Update - Oct 31, 2007   Eric Swartz - WA6HHQ, Elecraft
  • [Elecraft] K3 Status Update - Oct 31, 2007   Raj Dewan, N2RD
    • [Elecraft] K3 Status Update - Oct 31, 2007   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] [K3] Shipping Update   vk2nu at bigpond.net.au

Last message date: Wed Oct 31 22:08:19 EST 2007
Archived on: Sun Nov 18 09:39:29 EST 2007

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...