[Elecraft] K2 IF amplifier output fault

[Alan Ibbetson]

In message <001601c80917$5639de70$2101a8c0 at PCRoelof>, Roelof Bakker 
<roelof at ndb.demon.nl> writes
>Hello Alan,
>
>I had also a problem with low output.
>It appeared that I had installed a 1800 pF capacitor  instead of 180 pF 
>at C182.
>
>Have you checked this capacitor?

Roelof,

Thanks for your suggestion. C182 is marked "181" as expected. I removed 
it and measured its value. It is 176pF.

So that's not it. Next test is to remove D40 and D41 as suggested by 
Don.

-- 

Cheers,

Alan G3XAQ
alan at g3xaq.demon.co.uk