[Elecraft] K3 - very brief first impressions...

[Greg - AB7R]

Yes...bias is settable independently between the FP and RP mic connections.  Although you can have both mics connected at the same 
time, you do need to use the menu entry for MIC SRC to select the mic you want to use, or to select Line IN.  I like to keep this 
menu item programmed into one of the PFx buttons.  When you have the menu open and make your selection, you tap "1" to toggle 
between hi and lo gain, and tap 2 to turn bias on or off (these apply to the FP and RP mic options).


-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065
K3#0009

On Tue Oct 30  4:06 , "David Ferrington, M0XDF"  sent:

>I have an HM10 dual I'm planning on using with my K3 - did you find any
>issues with setup for a Goldline.
>
>I plan on using the ProSet-K2 from the front mic connector and the HM10 on a
>boom in the back. I think the Proset will need bias (does it?) and the HM10
>not - I haven't figured out from the op manual whether the bias is settable
>on a per connection basis yet?
>
>
>On 30/10/07 07:36, "Jeff Stai" jds at twistedoak.com> sent:
>
>> - All my stuff is set up for Yaesu but I had a spare cable for the Goldline
>> which I converted to the
>> Elecraft pinout by moving two wires. (I like using the boom mic because it
>> forces me to sit up
>> straight...) Works like a champ.
>
>-- 
>I never did a day's work in my life; it was all fun. -Thomas Edison
>
>
>_______________________________________________
>Elecraft mailing list
>Post to: Elecraft at mailman.qth.net
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft    
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com