[Elecraft] Logger32

[Joe Subich, W4TV]

Mike, 

FR0 sets the receiver to VFO A - which is appropriate when 
clicking on a spot (set operation to the main VFO or main receiver), 
set frequency, then set the transmit frequency if different and 
finally turn on split). 

It is the MD3; command that is setting normal CW (MD3; is CW, 
MD7; is CW-R).  The discussion with any software author needs to 
be to support CW-R if you generally operate CW-R instead of CW. 
Some software allows the user to specify CW or CW-R as the default 
when clicking on a spot but that choice is used for all spots 
(it is, after all, necessary to set the mode when clicking on a 
spot). 

73, 

   ... Joe, W4TV 
 



> | Mike Harris wrote:
> | > G'day,
> | >
> | > Been checking the command from Logger32 to the K2 when directly 
> entering a
> | > frequency eg. 18073kHz:
> | >
> | > FR0;FA00018073000;MD3;FA00018073000;
> | >
> | > FRO cancels split and presumably CW reverse as well.
> | >
> | > Bugger!
> | >
> | > Regards,
> | >
> | > Mike VP8NO
> | >
> | >
> | >
> |
> |
> | -- 
> | No virus found in this incoming message.
> | Checked by AVG Free Edition.
> | Version: 7.5.488 / Virus Database: 269.14.1/1050 - Release Date: 
> 04/10/2007 17:03
> |
> | 
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 
>