[Elecraft] KX1 and Straight key

[Dave G.]

Don,

Thanks for the reply....

I'm also assuming that leaving the 'ring' connection open will not cause a 
problem with the MCU --- I had a slight concern that it might leave pin 24 in 
an indeterminate state when transmitting...

Dave KK7SS

On 30 Sep 2007 at 23:31, Don Wilhelm wrote:
>> Wire it that way and set the menu to INP HND and it should work FB.
>> 
>> 73,
>> Don W3FPR
>> 
>> Dave G. wrote:
>> > I want to ise a Straigh (Hand) key with the KX-1\
>> > I'm assuming the following...
>> >
>> > Tip => hot
>> > Sleeve => gnd
>> >
>> > Am I correct??? I saw nothing in the Manual to indicate which way it goes