[Elecraft] K3/K2: RS-232 cable

[Don Wilhelm]

I had a typo in the last part of my previous note.  That should have 
been *K3*.
Do *not* use a standard serial cable with the K2!

Sorry,
Don W3FPR

Don Wilhelm wrote:
>
> So *if* only RXD and TXD with Signal Ground are needed for the 
> application, yes, the K2 cable (computer end, not KAT100 or XV end) 
> will work just fine, but why not pick up a standard serial cable and 
> take advantage of the PTT/Keying circuits built into the *K2* - that 
> will work with no external keying devices.
>