November 2004 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Nov 1 02:02:27 EST 2004
Ending: Tue Nov 30 20:23:30 EST 2004
Messages: 981

• [Elecraft] Neat Backpack idea   John ( N5BSD )
• [Elecraft] Neat Backpack idea   John ( N5BSD )
• [Elecraft] C W question/Cut numbers   Doug Faunt N6TQS +1-510-655-8604
• [Elecraft] MD2 resistor mod - a different approach?   Jean-François Ménard
• [Elecraft] VCO relationship with 4 Mhz ocsillator   Jean-François Ménard
• [Elecraft] VCO relationship with 4 Mhz ocsillator   Jean-François Ménard
• [Elecraft] VCO relationship with 4 Mhz ocsillator   Jean-François Ménard
• [Elecraft] Re: Elecraft[6/31] - Time Change   Phil Barnes-Roberts AD6PQ
• [Elecraft] Re: Time Change   Robert C. Abell
• [Elecraft] Re: Elecraft sales (Exchange Rate)   Robert C. Abell
• [Elecraft] Re: 20 M net- propagation   Ray Albers
• [Elecraft] home brew ladder line hint.   Ray Albers
• [Elecraft] 04 SS Phone / K2   Dan Allen
• [Elecraft] Re: Time Change   Tom Althoff
• [Elecraft] K2 ser# registry?   Tom Althoff
• [Elecraft] KPA 100 for sale   Tom Althoff
• [Elecraft] KPA 100 for sale   Tom Althoff
• [Elecraft] C13, C14 Values RF board K2?   Tom Althoff
• [Elecraft] C13, C14 Values RF board K2?   Tom Althoff
• [Elecraft] RTTY BFO settings?   Tom Althoff
• [Elecraft] Audio mod for split operation   Tom Althoff
• [Elecraft] Audio mod for split operation   Tom Althoff
• [Elecraft] Elecraft CW Net Cancellation   Tom Althoff
• [Elecraft] I'm havin' a BALL !!!   Tom Althoff
• [Elecraft] KNB2 - odd behavior   Tom Althoff
• [Elecraft] Power lag after changing bands...   Tom Althoff
• [Elecraft] Power lag after changing bands...   Tom Althoff
• [Elecraft] Rediculous, unreasonable and selfish firmware feature request..   Tom Althoff
• [Elecraft] KAT 100-1 vs KAT 100-2   Tom Althoff
• [Elecraft] EC-1.5...is there a half height EC-2 on the horizon?   Tom Althoff
• [Elecraft] EC-1.5...is there a half height EC-2 on the horizon?   Tom Althoff
• [Elecraft] Re: Ridiculous, unreasonable and selfish firmware feature request..   Tom Althoff
• [Elecraft] Muting the K2   Tom Althoff
• [Elecraft] Heil ProSet Plus with K2   Tom Althoff
• [Elecraft] Handy module to assist calibration   Tom Althoff
• [Elecraft] 5 turns for T3 in K2 revisited...   Tom Althoff
• [Elecraft] Heavy duty carying case   Tom Althoff
• [Elecraft] Minimum clearance on KPA-100 heatsink?   Tom Althoff
• [Elecraft] KPA-100ModKt   Tom Althoff
• [Elecraft] K2 #1117-C facelift pics   Tom Althoff
• [Elecraft] Excellent exchange rate (or article?) helping Elecraftsales to Europe?   Tom Althoff
• [Elecraft] KPA-100 upgraded and on the air!   Tom Althoff
• [Elecraft] MD2 resistor mod - a different approach?   Tom Althoff
• [Elecraft] MD2 resistor mod - a different approach?   Tom Althoff
• [Elecraft] MD2 resistor mod - a different approach?   Tom Althoff
• [Elecraft] KPA-100 fan air flow   Tom Althoff
• [Elecraft] KPA-100 fan air flow   Tom Althoff
• [Elecraft] Auto-detect disable with internal keyer   Tom Althoff
• [Elecraft] Auto-detect disable with internal keyer   Tom Althoff
• [Elecraft] Heil ProSet Plus with K2   Tom Althoff
• [Elecraft] Highest power supply voltage for K2?   Tom Althoff
• [Elecraft] Highest power supply voltage for K2?   Tom Althoff
• [Elecraft] KPA-100 spur on 160M?   Tom Althoff
• [Elecraft] K2 results   Tom Althoff
• [Elecraft] Elecraft DX Contest Group?   Tom Althoff
• [Elecraft] KPA-100 spur on 160M?   Tom Althoff
• [Elecraft] no audio after switch on   Karl Altmann
• [Elecraft] Elecraft rigs in Hungary?   Arato Andras
• [Elecraft] KX-1 s/n 0914 ON THE AIR!!   Richard Arland
• [Elecraft] KX-1 pouch   Richard Arland
• [Elecraft] Ear buds fo rthe KX-1   Richard Arland
• [Elecraft] KXAT-1 Fully Operational!   Richard Arland
• [Elecraft] KX-1 SN: 0914 & DX   Richard Arland
• LA1PHA: RE: [Fwd: [Elecraft] My K2/100 wan't regulate down power on 40/80]   Tom Arntzen
• [Elecraft] Build 100W amp & tuner 1st - issues?   Tom Arntzen
• [Elecraft] Spectrogram help   Tom Arntzen
• [Elecraft] Rediculous, unreasonable and selfish firmware feature request..   Tom Arntzen
• [Elecraft] K2 PLL Range   Tom Arntzen
• [Elecraft] KPA100 Voltage Measurement Discrepancy Question   Tom Arntzen
• [Elecraft] OK, I broke it!   Tom Arntzen
• [Elecraft] Re: Is there a K3 coming - Not at this time.   Tom Arntzen
• [Elecraft] PSK31 question   Tom Arntzen
• [Elecraft] KNB2. Does it work? YES!!   Tom Arntzen
• [Elecraft] Elecraft "6N2"?   Tom Arntzen
• [Elecraft] SSB low output   Tom Arntzen
• [Elecraft] KSB2 and SSBA settings?   Tom Arntzen
• [Elecraft] KPA-100 spur on 160M?   Tom Arntzen
• [Elecraft] Elecraft DX Contest Group?   Tom Arntzen
• [Elecraft] K6XX Tuning Indicator   Howard W. Ashcraft
• [Elecraft] Circuit Simulation Software   Howard W. Ashcraft
• [Elecraft] K2 S meter   Howard W. Ashcraft
• [Elecraft] K2/100 rtty & microphones questions   David Ashworth
• [Elecraft] audio level   Benny Aumala
• [Elecraft] Parallel line lightning arrestors   Mike B
• [Elecraft] Re: Parallel line lightning arrestors   Mike B
• [Elecraft] led tuning ind   PERRY BAKER
• [Elecraft] Legendary Customer Service   Michael Babineau
• [Elecraft] re: KX1 low power out   Michael Babineau
• [Elecraft] Internal AAA batteries for KX1?   Michael Babineau
• [Elecraft] KX1 SWR limits: general discussion [+ bonus LED   Michael Babineau
• [Elecraft] Problem with gmfsk   John J. Bahun
• [Elecraft] VCO relationship with 4 Mhz ocsillator   Stewart Baker
• [Elecraft] K2 - Strange problem ?   Stewart Baker
• [Elecraft] K2 - Strange Problem ?   Stewart Baker
• [Elecraft] K2 - Strange Problem ?   Stewart Baker
• [Elecraft] K2 - Strange Problem ?   Stewart Baker
• [Elecraft] K2 - Strange Problem ?   Stewart Baker
• [Elecraft] K2- Sometimes no audio after switch on   Stewart Baker
• [Elecraft] Anyone know how an MH2 works?   Dan Barker
• FW: WG4S: RE: [Elecraft] Anyone know how an MH2 works?   Dan Barker
• [Elecraft] How to set up SSB   Dan Barker
• FW: [Elecraft] How to set up SSB   Dan Barker
• FW: [Elecraft] How to set up SSB   Dan Barker
• [Elecraft] PSK31 question   Dan Barker
• FW: [Elecraft] PSK31 question   Dan Barker
• FW: [Elecraft] PSK31 question   Dan Barker
• FW: [Elecraft] K2 Control Board   Dan Barker
• FW: [Elecraft] K2 Control Board   Dan Barker
• [Elecraft] K2 Phase Noise   Dan Barker
• [Elecraft] Anyone know how an MH2 works?   Dan Barker
• FW: [Elecraft] Anyone know how an MH2 works?   Dan Barker
• [Elecraft] How to set up SSB   Dan Barker
• FW: [Elecraft] Both internal and external keyer   Dan Barker
• [Elecraft] How to set up SSB   Dan Barker
• [Elecraft] 04 SS Phone / K2   Dan Barker
• FW: FW: [Elecraft] Both internal and external keyer   Dan Barker
• FW: [Elecraft] Excellent exchange rate (or article?) helping Elecraftsales to Europe?   Dan Barker
• FW: [Elecraft] Picked up this partially built K2   Dan Barker
• [Elecraft] Stupid C W question   Dan Barker
• [Elecraft] re:K2 - Strange problem   Dan Barker
• [Elecraft] Highest power supply voltage for K2?   Dan Barker
• [Elecraft] List of menu commands, queries   Barry, Steve
• [Elecraft] In ear monitors   Bob Baxter
• [Elecraft] Hum Coupling   Ken Beals
• [Elecraft] 04 SS Phone / K2   Ken Beals
• [Elecraft] MFJ/Curtis 8045ABM chip   G. Beat
• [Elecraft] Temp controlled solder station   G. Beat
• [Elecraft] soldering iron story   G. Beat
• [Elecraft] Soldering station for new builder?   G. Beat
• [Elecraft] Possible REALLY GOOD BUY on T/C Soldering Stn   G. Beat
• [Elecraft] Weller TCP series parts   G. Beat
• [Elecraft] Possible REALLY GOOD BUY on T/C Soldering Stn   G. Beat
• [Elecraft] Posting   Thomas Beaudry
• [Elecraft] K2 Control Board   Francis Belliveau
• [Elecraft] Re: Rediculous, unreasonable and selfish firmware feature request..   David A. Belsley
• [Elecraft] keyer thread   David A. Belsley
• [Elecraft] Re: Is there a K3 coming - Not at this time.   David A. Belsley
• [Elecraft] K2 S meter   David A. Belsley
• [Elecraft] N-GEN noise generator question   BobConvers at aol.com
• [Elecraft] Re: N-GEN noise generator question   BobConvers at aol.com
• [Elecraft] Increased Elecraft orders from Europe   Robert Boerhorst
• [Elecraft] SSB low output   Dale Boresz
• [Elecraft] In ear monitors   Dale Boresz
• [Elecraft] troubles with kits   Buddy Brannan
• [Elecraft] Elecraft desk mic and stands...which to buy?   Buddy Brannan
• [Elecraft] KIO2 simplex?   Tom Rune Breivold
• [Elecraft] WA3WSJ: AT trip to Pulpit Rock, PA   Edward R. Breneiser
• [Elecraft] WA3WSJ on AT Today 11/11/2004   Edward R. Breneiser
• [Elecraft] WA3WSJ: The Best Laid Plans - Fail!   Edward R. Breneiser
• [Elecraft] WA3WSJ on Lancaster County Covered 3- Bridge Tour   Edward R. Breneiser
• [Elecraft] ARCBS Jingle Bell Romp Award   Edward R. Breneiser
• [Elecraft] ARCBS 2004 Jingle Bell Romp Award!   Edward R. Breneiser
• [Elecraft] ARCBS Jingle Bell Romp Award   Edward R. Breneiser
• [Elecraft] ARCBS 2004 Jingle Bell Romp Award - Sorry!   Edward R. Breneiser
• [Elecraft] WA3WSJ to activate a covered bridge or two today!   Edward R. Breneiser
• [Elecraft] ARCBS Jingle Bell Romp Award - Try Again!   Edward R. Breneiser
• [Elecraft] ARCBS Thanksgiving Holiday Covered Bridge Activations   Edward R. Breneiser
• [Elecraft] WA3WSJ Herr Mill Covered bridge Activation Saturday, 11/27 38-36-21   Edward R. Breneiser
• [Elecraft] Rediculous, unreasonable and selfish firmware feature request..   Jack Brindle
• [Elecraft] Re: Is there a K3 coming - Not at this time.   Jack Brindle
• [Elecraft] KAT100 LEDs Gone Wild   Jack Brindle
• [Elecraft] Highest power supply voltage for K2?   Jack Brindle
• [Elecraft] KI6WX K2 Mods   Jim Brooker
• [Elecraft] EC-1.5...is there a half height EC-2 on the horizon?   Don Brown
• [Elecraft] SSB low output   Don Brown
• [Elecraft] RE: K1 10 turn pot   Don Brown
• [Elecraft]K2 FM-ing and AM-ing on 80Meters problem solved   Bryan
• [elecraft] two problems K2 sn 4421   Bryan
• [elecraft]K2 sn 4421   Bryan
• Re[Elecraft]K160RX problem   Bryan
• [elecraft] K160RX problem   Bryan
• [Elecraft] Another PSK31 Power Question   Parker Buckley
• [Elecraft] Rediculous, unreasonable and selfish firmware feature request..   Lee Buller
• [Elecraft] CW - SS - Off Topic   Lee Buller
• [Elecraft] K2 and 40 meters   Lee Buller
• [Elecraft] Simply Amazed - A Story of the K2   Lee Buller
• [Elecraft] Comparing HexKey CW Paddle   Jeff Burns
• [Elecraft] K2: Control Board Strangeness   Tim Cailloux
• [Elecraft] Control Board Strageness   Tim Cailloux
• [Elecraft] HFPack amp kit   Carl Morris, WN3DUG
• [Elecraft] List of menu commands, queries   Carl Morris, WN3DUG
• [Elecraft] time adjustment   MC Carpenter
• [Elecraft] direction and power   MC Carpenter
• [Elecraft] KAT100 LEDs Gone Wild   MC Carpenter
• [Elecraft] directional antenna   MC Carpenter
• [Elecraft] directional antenna   MC Carpenter
• Fw: [Elecraft] directional antenna   MC Carpenter
• [Elecraft] directional antenna   MC Carpenter
• [Elecraft] electronic history a ham's delight, directional's   MC Carpenter
• [Elecraft] Mail Folders   Philip L Carter
• [Elecraft] Mail Folders   Philip L Carter
• [Elecraft] Re: Is there a K3 coming - Not at this time.   Philip L. Carter
• [Elecraft] KIO2 simplex?   Philip L. Carter
• [Elecraft] Fundamental over load on 40 Meters   Whitney Carter
• [Elecraft] KX1 Brag   John Chappell
• [Elecraft] Proper Use of the Preamp   Ron D'Eau Claire
• [Elecraft] Proper Use of the Preamp   Ron D'Eau Claire
• [Elecraft] K2: Problem With 80m?   Ron D'Eau Claire
• [Elecraft] K2- Is the Power display really representative of PEP?   Ron D'Eau Claire
• [Elecraft] Re: Rediculous, unreasonable and selfish firmware feature request..   Ron D'Eau Claire
• [Elecraft] Re: K2 Noise Blanker   Ron D'Eau Claire
• [Elecraft] Re: Rediculous, unreasonable and selfish firmware feature request..   Ron D'Eau Claire
• [Elecraft] Re: Is there a K3 coming - Not at this time.   Ron D'Eau Claire
• [Elecraft] PSK31 question   Ron D'Eau Claire
• [Elecraft] PSK31 question   Ron D'Eau Claire
• [Elecraft] Shortwave Reveiver kit ???   Ron D'Eau Claire
• [Elecraft] Parallel line lightning arrestors   Ron D'Eau Claire
• [Elecraft] K2 BFO Test: BFO low freq is really low   Ron D'Eau Claire
• [Elecraft] K2 BFO Test: BFO low freq is really low   Ron D'Eau Claire
• [Elecraft] KX1 Wanted   Ron D'Eau Claire
• [Elecraft] Soldering stations.   Ron D'Eau Claire
• [Elecraft] KX1 Excessive Power Out   Ron D'Eau Claire
• [Elecraft] K1 KNB1 Question   Ron D'Eau Claire
• [Elecraft] Transverter confusion   Ron D'Eau Claire
• [Elecraft] Transverter confusion   Ron D'Eau Claire
• [Elecraft] SSB low output   Ron D'Eau Claire
• [Elecraft] MD2 Heil Desk Microphone for the K2   Ron D'Eau Claire
• [Elecraft] KX-1/MP-1 SWR limits   Ron D'Eau Claire
• [Elecraft] Elecraft rigs in Hungary?   Ron D'Eau Claire
• [Elecraft] KPA-100 fan air flow   Ron D'Eau Claire
• [Elecraft] Picked up this partially built K2   Ron D'Eau Claire
• [Elecraft] VCO relationship with 4 Mhz ocsillator   Ron D'Eau Claire
• [Elecraft] VCO Relationship with 4 MHz Oscillator   Ron D'Eau Claire
• [Elecraft] directional antenna   Ron D'Eau Claire
• [Elecraft] Posting   Ron D'Eau Claire
• [Elecraft] loss of side tone   Ron D'Eau Claire
• [Elecraft] C W question/Cut numbers   Ron D'Eau Claire
• [Elecraft] Highest power supply voltage for K2?   Ron D'Eau Claire
• [Elecraft] KPA-100 spur on 160M?   Ron D'Eau Claire
• [Elecraft] MH2 to MD2 - K2, Modification Required?   Paul Clay
• [Elecraft] Soldering stations   Robert Cochrane
• [Elecraft] KSB2 - 1.9 kHz mods and wish list   Bill Coleman
• [Elecraft] Re: N-GEN noise generator question   Rick Commo
• [Elecraft] LC Meter   Rick Commo
• [Elecraft] K2 S/N 4226 60m VCO value   Kenyon Cox
• [Elecraft] Shameless Sked Solicitation   Bert Craig
• [Elecraft] Elecraft MD2 mic   Gilbert J Cross
• [Elecraft] K2 - Strange problem ?   Gilbert J Cross
• [Elecraft] QST Review of KAT100 and KDSP2 in Jan 2005 Issue   Gilbert J Cross
• [Elecraft] Hum Coupling   Earl W Cunningham
• [Elecraft] Hum Coupling   Earl W Cunningham
• [Elecraft] Hum Coupling   Earl W Cunningham
• [Elecraft] CW - SS - Off Topic   Earl W Cunningham
• [Elecraft] Stupid C W question   Earl W Cunningham
• [Elecraft] Dead Band Quiz   Earl W Cunningham
• [Elecraft] Dead Band Quiz   Earl W Cunningham
• [Elecraft] Fw: Re: Topband: Receivers with a Twist   Earl W Cunningham
• [Elecraft] Ham shop nr Washington DC   John D'Ausilio
• [Elecraft] PSK31 question   John D'Ausilio
• [Elecraft] ProSet-K2 and big heads   John D'Ausilio
• [Elecraft] Re: N-GEN noise generator question   John D'Ausilio
• [Elecraft] Re: Excellent exchange rate ...   Ingo Meyer DK3RED
• [Elecraft] directional antenna   DYARNES at aol.com
• [Elecraft] Comparing HexKey CW Paddle   Daniel.Pawlak at gd-ais.com
• [Elecraft] Re: Rediculous [sic], unreasonable and selfish firmwarefeature request..   Trevor Day
• [Elecraft] Talking filter Bandwidths   Deni
• [Elecraft] SMD delights and zero beat indicators   Deni
• [Elecraft] Circuit Simulation Software   Pierre Desjardins
• [Elecraft] Excellent exchange rate (or article?) helping Elecraftsales to Europe?   Pierre Desjardins
• [Elecraft] K1 KNB1 Question   Dwight
• [Elecraft] K1 / KFL1-4 / Question   Dwight
• [Elecraft] Update - K1 / KFL1-4 / Question   Dwight
• [Elecraft] FS / TRADE K1 - 2   Dwight
• [Elecraft] K2 FM-ing and AM-ing on 80 Meters Problem Solved   Don Ehrlich
• [Elecraft] KX1 Wanted   Ellam, Timothy St. J.
• [Elecraft] K2 Requested vs. Indicated Power Output   Dan Elliott
• [Elecraft] Elecraft "6N2"?   Ted Ellmore
• [Elecraft] Re: Time Change -- END of thread   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] 3rd K2 and BPL   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] List of menu commands, queries   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] 10/12M Low Output Question   Eric Swartz - WA6HHQ, Elecraft
• FW: WG4S: RE: [Elecraft] Anyone know how an MH2 works?   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Re: Is there a K3 coming - Not at this time.   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Keiying an external amp with the K2   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] $39 special on Elecraft/Heil MD2 desk mic; MD2 accessories also discounted   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Excellent exchange rate (or article?) helping Elecraft sales to Europe?   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] How to set up SSB   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] New Tech Notes Article - SP2 Speaker for the K2   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Elecraft rigs in Hungary?   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] MH2 to MD2 - K2, Modification Required?   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Posting - END OF THREAD   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] CQ WW DX CW...and Elecraft K2/100 #3311   J F
• [Elecraft] Elecraft DX Contest Group?   J F
• [Elecraft] K2 super kit, but new problem !   F5UL
• [Elecraft] K2 - No problems !   F5UL
• [Elecraft] K2 / F5UL   F5UL
• [Elecraft] K2 - Filters adjustement   F5UL
• [Elecraft] K2 results   F5UL
• [Elecraft] Excellent exchange rate (or article?) helping Elecraft sales to Europe?   Stephen Farthing
• [Elecraft] Comparing HexKey CW Paddle   Doug Forman
• [Elecraft] KX1 Carrying Cases back in stock!   Doug Forman
• [Elecraft] Blown ammeter question used with KX1/gelcell/solar panel   Doug Forman
• [Elecraft] Blown ammeter question used with KX1/gelcell/solar panel   Doug Forman
• [Elecraft] N-GEN noise generator question   Robert Friess
• [Elecraft] Testing BL1 mini module   Robert Friess
• [Elecraft] Stupid C W question   Alan Fryer
• [Elecraft] Re: Rediculous, unreasonable and selfish firmware feature request..   Hisashi T Fujinaka
• [Elecraft] keyer thread   Hisashi T Fujinaka
• [Elecraft] Circuit Simulation Software   Hisashi T Fujinaka
• [Elecraft] Highest power supply voltage for K2?   Hisashi T Fujinaka
• [Elecraft] Re: [[email protected]   G3VVT at aol.com
• [Elecraft] Signal Generator   G3VVT at aol.com
• [Elecraft] K2 BFO Test: BFO low freq is really low   G3VVT at aol.com
• [Elecraft] OT: Demagnetize Soldering Tip?   G3VVT at aol.com
• [Elecraft] soldering iron story   G3VVT at aol.com
• [Elecraft] K2 Noise Blanker Modifications   G3VVT at aol.com
• [Elecraft] Alignment and Test, Part II   G3VVT at aol.com
• [Elecraft] Re: Alignment and Test, Part II   G3VVT at aol.com
• [Elecraft] K2 and FM   G3VVT at aol.com
• [Elecraft] K2 S meter   G3VVT at aol.com
• [Elecraft] SSB low output   G3VVT at aol.com
• [Elecraft] How to set up SSB   G3VVT at aol.com
• [Elecraft] #4472 transmitter setup problem.   G3VVT at aol.com
• [Elecraft] Highest power supply voltage for K2?   G3VVT at aol.com
• [Elecraft] K2 - Strange Problem ?   G3VVT at aol.com
• [Elecraft] Elecraft XV50 Transverter on 4mtrs/70Mhz - UK/Europe Question?   Ken G3WCS
• [Elecraft] Elecraft XV50 Transverter on 4mtrs/70Mhz - UK/EuropeQuestion?   Ken G3WCS
• [Elecraft] Elecraft XV50 Transverter on 4mtrs/70Mhz - UK/EuropeQuestion?   Ken G3WCS
• [Elecraft] Transverter confusion   Ken G3WCS
• [Elecraft] Excellent exchange rate (or article?) helping Elecraft sales to Europe?   Ken G3WCS
• [Elecraft] COM1 and K2   C. GONDARD
• [Elecraft] Testing BL1 mini module   Chuck Gehring
• [Elecraft] Posting   George, W5YR
• [Elecraft] Picked up this partially built K2   Jim Giammanco
• [Elecraft] K2: No recieve/power out on 20M thru 10M   Marc Glade
• [Elecraft] K2: No recieve/power out on 20M thru 10M   Marc Glade
• [Elecraft] K2: No recieve/power out on 20M thru 10M   Marc Glade
• [Elecraft] K2: No recieve/power out on 20M thru 10M   Marc Glade
• [Elecraft] Cost Effective Balun   Charles Greene
• [Elecraft] K2 CAT commands   Charles Greene
• [Elecraft] PSK31 question   Charles Greene
• [Elecraft] K2/100 and PSK31   Charles Greene
• [Elecraft] Testing BL1 mini module   Charles Greene
• [Elecraft] LC Meter   Charles Greene
• [Elecraft] K2 feature request   Geert Jan de Groot
• [Elecraft] Thanks everybody   Bruce Grubbs
• [Elecraft] Talking filter Bandwidths   Guy Olinger, K2AV
• [Elecraft] Talking filter Bandwidths   Guy Olinger, K2AV
• [Elecraft] Alignment and Test, Part II   HB9DUT
• [Elecraft] Alignment and Test, Part II   HB9DUT
• [Elecraft] Alignment and Test, Part II   HB9DUT
• [Elecraft] Re: Alignment and Test, Part II   HB9DUT
• [Elecraft] Alignment and Test, Part II   HB9DUT
• [Elecraft] K2 #4520 up and running...   HB9DUT
• [Elecraft] 4MHz Oscillator Calibration   David Haas
• [Elecraft] KPA100 Shields   Kent Haase
• [Elecraft] KPA100 Shields   Kent Haase
• [Elecraft] Re: K2 Noise Blanker   Richard Haendel
• [Elecraft] LC meter   Richard Haendel
• [Elecraft] K1 Problem   Glenn Haffly
• [Elecraft] K2 Control Board   Glenn Haffly
• [Elecraft] PLL Reference Oscillator problem   Tom Hall
• [Elecraft] Tuning indicator problem   Tom Hammond
• [Elecraft] K6XX CW Tun Ind - Resistances and Voltages   Tom Hammond
• [Elecraft] K2 #00008 - Sweepstakes 2004 Report   Tom Hammond
• [Elecraft] Call for SCANS of an UNBUILT KX1 PC board   Tom Hammond
• [Elecraft] Elecraft PC Board Scans - Today's Additions   Tom Hammond
• [Elecraft] Elecraft PC Board Scans - Today's Additions   Tom Hammond
• [Elecraft] N0SS's CW Tuning Indcator   Tom Hammond
• [Elecraft] CURRENT AVAILABILITY of CW Tuning Indicator Kits from N0SS   Tom Hammond
• [Elecraft] Possible REALLY GOOD BUY on T/C Soldering Stn AND DE-Soldering Stn   Tom Hammond
• [Elecraft] Possible REALLY GOOD BUY on T/C Soldering Stn AND DE-Soldering Stn   Tom Hammond
• [Elecraft] Possible REALLY GOOD BUY on T/C Soldering Stn   Tom Hammond
• [Elecraft] OK, I give in... Another run of the tuning Indicator   Tom Hammond
• [Elecraft] Re: Time Change   Augie Hansen
• [Elecraft] Audio mod for split operation   Augie Hansen
• [Elecraft] Question on KAT2   Augie Hansen
• [Elecraft] KPA-100 for sale   Dick Hanson
• [Elecraft] KPA100 & EC2   Michael Harris
• [Elecraft] How to set up SSB   Nigel & Beryl Hayton
• [Elecraft] How to set up SSB   Nigel & Beryl Hayton
• [Elecraft] K2 PLL Range   John Heaviside
• [Elecraft] K2 PLL Range   John Heaviside
• [Elecraft] KS PLL Reference Oscillator   John Heaviside
• [Elecraft] KS PLL Reference Oscillator   John Heaviside
• [Elecraft] K2 Control Board Resistance Checks   Jeff Hetherington
• [Elecraft] N0SS's -- LED Tuning Indicator SMD kit Review by KH6NO/W7   Willie Hew
• [Elecraft] KX1 low power out   Tim Hodges
• [Elecraft] Mirror of "LA3ZA Unofficial Guide to Elecraft K2 Modifications"   Sverre Holm
• [Elecraft] K2 Noise Blanker Modifications   Sverre Holm
• [Elecraft] K2 Noise Blanker Modifications   Sverre Holm
• [Elecraft] FS: KX1   Steve Hostetler
• [Elecraft] The KX1 is Sold   Steve Hostetler
• [Elecraft] K6XX/N0SS Tuning Indicator in K1   Steve Hostetler
• [Elecraft] Re: Elecraft[6/31] - Time Change   Arthur W. Neilson III
• [Elecraft] k1 completed with SSB   Daniele IK1JGU
• [Elecraft] k1 ssb mod by Giuliano I0CG correct site address   Daniele IK1JGU
• [Elecraft] FS: HFPack Amplifier Kit   Jeff Imel
• [Elecraft] FS: HFPack Amplifier Kit   Jeff Imel
• [Elecraft] FS: HFPack Amplifier Kit   Jeff Imel
• [Elecraft] external keyer   Indy
• [Elecraft] HFPack amp kit   Steve Jackson
• [Elecraft] new filter crystals for #0771   Steve Jackson
• [Elecraft] keyer thread   Steve Jackson
• [Elecraft] listening to yourself   Steve Jackson
• [Elecraft] crystals and radio names   Steve Jackson
• [Elecraft] soldering iron story   Steve Jackson
• [Elecraft] 2 good ideas   Steve Jackson
• [Elecraft] another successful Elecraft kit build   Steve Jackson
• [Elecraft] one-microphone question   Steve Jackson
• [Elecraft] Elecraft CW Net Cancellation   Fred Jensen
• [Elecraft] Keyer thread   Fred Jensen
• [Elecraft] External linear amplifier with CW   Fred Jensen
• [Elecraft] Neat Backpack idea   Fred Jensen
• [Elecraft] K2 BFO Test: BFO low freq is really low   Fred Jensen
• [Elecraft] KX-1/MP-1 SWR limits   Fred Jensen
• [Elecraft] KX-1/MP-1 SWR limits   Fred Jensen
• [Elecraft] Re: Alignment and Test, Part II   Jerry
• [Elecraft] KX1 or K1 building for free.   JessMX5
• [Elecraft] Posting   JessMX5
• [Elecraft] N0SS's CW Tuning Indcator   John
• [Elecraft] KPA100 C83   John, KI6WX
• [Elecraft] K2 Phase Noise   John, KI6WX
• [Elecraft] KX1 & Wind River Mountains   John, KI6WX
• [Elecraft] Shortwave Reveiver kit ???   John_K7FD
• [Elecraft] KPA100 remote w/o KAT100?   Lyle Johnson
• [Elecraft] KDSP2's Primary Menu - K2 s/n 549   Lyle Johnson
• [Elecraft] Followup - KDSP2's Primary Menu - K2 s/n 549   Lyle Johnson
• [Elecraft] troubles with kits   Lyle Johnson
• [Elecraft] DSP on 60 Meters   Lyle Johnson
• [Elecraft] temp controlled soldering equip.   R K Johnson
• [Elecraft] K2 CAT commands   Wolf-Ruediger Juergens
• [Elecraft] Dead Band Quiz   Wolf-Ruediger Juergens
• [Elecraft] K2 #03756 - Sweepstakes 2004 Report   Ken K3IU
• [Elecraft] ATU P6/J7 alignment   K4IA at aol.com
• [Elecraft] QST Review of KAT100 and KDSP2 in Jan 2005 Issue   K4tmc at aol.com
• [Elecraft] KX1 Carrying Cases back in stock!   Trev - K6ESE
• [Elecraft] Posting   Trev - K6ESE
• [Elecraft] K2/100 rtty & microphones questions   K6TFZ at aol.com
• [Elecraft] Recommend amp for after XV50   K6TFZ at aol.com
• [Elecraft] Re: Time Change   Hank Kohl K8DD
• [Elecraft] Re: Rediculous, unreasonable and selfish firmware feature request..   Hank Kohl K8DD
• [Elecraft] KX1 FOR SALE   Jerry K8RA
• [Elecraft] For Sale- Long List   Anthony Luscre K8ZT
• [Elecraft] FS- K2 Price reduced   Anthony Luscre K8ZT
• [Elecraft] CW - SS - Off Topic   Dan KB6NU
• [Elecraft] RE: K1 10 turn pot   KN4UD
• [Elecraft] KNB2 - odd behavior   David Zatopek KT5V
• [Elecraft] KNB2 - odd behavior   David Zatopek KT5V
• [Elecraft] Newbie   KU4YP
• [Elecraft] K2- Is the Power display really representative of PEP?   Robin Kiszka-Kanowitz
• [Elecraft] K2- Is the Power display really representative of PEP?   Robin Kiszka-Kanowitz
• [Elecraft] KFL4 Problem   Richard Klingensmith
• [Elecraft] K1 / KFL1-4 / Question   Richard Klingensmith
• FW: RE: [Elecraft] K1 / KFL1-4 / Question   Richard Klingensmith
• [Elecraft] KI6WX K2 Mods   Christopher Kovacs
• [Elecraft] MD2   Phil LaMarche
• [Elecraft] Elecraft CW Net Report for November 21-22   Thom R. Lacosta
• [Elecraft] Elecraft rigs in Hungary?   Thom R. Lacosta
• [Elecraft] Elecraft rigs in Hungary?   Thom R. Lacosta
• [Elecraft] K2 #4424 Complete   Elliott Lawrence
• [Elecraft] 10/12M Low Output Question   Leigh L Klotz, Jr.
• [Elecraft] keyer thread   Leigh L Klotz, Jr.
• [Elecraft] 10/12M Low Output Question   Leigh L Klotz, Jr.
• [Elecraft] Another idea for a CW Tuner Indicator   Leigh L Klotz, Jr.
• [Elecraft] KSB2 and SSBA settings?   Leigh L Klotz, Jr.
• [Elecraft] KX-1/MP-1 SWR limits   Leigh L Klotz, Jr.
• [Elecraft] Re: [QRP-L] Problem with gmfsk   Leigh L Klotz, Jr.
• [Elecraft] C W question/Cut numbers   Leigh L Klotz, Jr.
• [Elecraft] Getting more KX1 sidetone levels by using tristate   Leigh L Klotz, Jr.
• [Elecraft] Solar flares and 80M serendipity   Leigh L. Klotz, Jr.
• [Elecraft] 10/12M Low Output Question   Leigh L. Klotz, Jr.
• [Elecraft] ProSet-K2 and big heads   Gregg R. Lengling
• [Elecraft] C13, C14 Values RF board K2?   Rich Lentz
• [Elecraft] Picked up this partially built K2   Rich Lentz
• [Elecraft] K2: Problem With 80m?   Michael J. Linden
• [Elecraft] K2: Adjusting CW filter for SSB reception   Michael J. Linden
• [Elecraft] Parallel line lightning arrestors   John R. Lonigro
• [Elecraft] Low voltage on AGC threshold   John R. Lonigro
• [Elecraft] Aurora borealis taken tonight   JEAN-FRANCOIS MENARD
• [Elecraft] Aurora borealis taken tonight   JEAN-FRANCOIS MENARD
• [Elecraft] Heavy duty carying case   JEAN-FRANCOIS MENARD
• [Elecraft] Heavy duty carying case   JEAN-FRANCOIS MENARD
• [Elecraft] OT: troubles with kits - my comments   Charles Mabbott
• [Elecraft] Fundamental over load on 40 Meters   Geoffrey Mackenzie-Kennedy
• [Elecraft] Heil ProSet Plus with K2   Geoffrey Mackenzie-Kennedy
• [Elecraft] Re: Is there a K3 coming - Not at this time.   Geoffrey Mackenzie-Kennedy
• [Elecraft] Talking filter Bandwidths   Geoffrey Mackenzie-Kennedy
• [Elecraft] Talking filter Bandwidths   Geoffrey Mackenzie-Kennedy
• [Elecraft] Talking filter Bandwidths   Geoffrey Mackenzie-Kennedy
• [Elecraft] Low voltage on AGC threshold   Geoffrey Mackenzie-Kennedy
• [Elecraft] Low voltage on AGC threshold   Geoffrey Mackenzie-Kennedy
• [Elecraft] K2 AGC Threshold.   Geoffrey Mackenzie-Kennedy
• [Elecraft] K2 and FM   Geoffrey Mackenzie-Kennedy
• [Elecraft] Re: K2 AGC Threshold.   Geoffrey Mackenzie-Kennedy
• [Elecraft] SSB low output   Geoffrey Mackenzie-Kennedy
• [Elecraft] SSB low output   Geoffrey Mackenzie-Kennedy
• [Elecraft] SSB low output   Geoffrey Mackenzie-Kennedy
• [Elecraft] SSB low output   Geoffrey Mackenzie-Kennedy
• **SPAM** Re: [Elecraft] SSB low output   Geoffrey Mackenzie-Kennedy
• [Elecraft] 04 SS Phone / K2   Geoffrey Mackenzie-Kennedy
• [Elecraft] K2 #4039 Headphone Socket - Replacement needed, UK supplier?   Geoffrey Mackenzie-Kennedy
• [Elecraft] Need advice on Heil mic   Geoffrey Mackenzie-Kennedy
• [Elecraft] ProSet-K2 and big heads   Geoffrey Mackenzie-Kennedy
• [Elecraft] K2 results   Geoffrey Mackenzie-Kennedy
• [Elecraft] C W question/Cut numbers   Geoffrey Mackenzie-Kennedy
• [Elecraft] C W question/Cut numbers   Geoffrey Mackenzie-Kennedy
• [Elecraft] Tuning indicator problem   Glenn Maclean
• [Elecraft] Tuning indicator problem   Glenn Maclean
• [Elecraft] SMD Version of the K6XX Visible LED CW Tuning Indicator   Glenn Maclean
• [Elecraft] How to set up SSB   John Magliacane
• FW: [Elecraft] How to set up SSB   John Magliacane
• [Elecraft] Circuit Simulation Software   John Magliacane
• [Elecraft] Comparing HexKey CW Paddle   Joe Malloy
• [Elecraft] KXAT-1 Fully Operational!   Joe Malloy
• [Elecraft] K2 Phase Noise   R March
• [Elecraft] Putting the K2 in K2ZR/FD; 3rd in 1A-b   Mark S. Adams, P.E.
• [Elecraft] Comparing HexKey CW Paddle   Roger Marrotte
• [Elecraft] MD2 Heil Desk Microphone for the K2   Roger Marrotte
• [Elecraft] MD2 Heil Desk Microphone for the K2   Roger Marrotte
• [Elecraft] K2 BFO Test: BFO low freq is really low   Jason Marten
• [Elecraft] K2 BFO Test: BFO low freq is really low   Jason Marten
• [Elecraft] K2 BFO Test: BFO low freq is really low (SOLVED)   Jason Marten
• [Elecraft] OT: Demagnetize Soldering Tip?   Martin
• [Elecraft] OT: Demagnetize Soldering Tip?   Martin
• [Elecraft] Elecraft, Reply to Herb   Martin.Evans at simoncarves.com
• [Elecraft] Hum Coupling   Masleid, Michael A.
• FW: [Elecraft] K2 - SN4511 Diffuser Question   Masleid, Michael A.
• [Elecraft] K2 #4472 new builder question on 4 mhz alighment   Masleid, Michael A.
• [Elecraft] EC-1.5...is there a half height EC-2 on the horizon?   Ian J Maude
• [Elecraft] Heil ProSet Plus with K2   Ian J Maude
• [Elecraft] OK, I broke it!   Ian J Maude
• [Elecraft] It works again :-)   Ian J Maude
• [Elecraft] All working :-)   Ian J Maude
• [Elecraft] Transverter confusion   Ian J Maude
• [Elecraft] Transverter confusion   Ian J Maude
• [Elecraft] SSB low output   Ian J Maude
• [Elecraft] List of menu commands, queries   Tom Mc
• [Elecraft] Sequential numbering keyer   Tom Mc
• [Elecraft] 20 meter problem on new K2   Rich McCabe
• **SPAM** Re: [Elecraft] SSB low output   Rich McCabe
• [Elecraft] Weller WTCPT magnetized tip   Jeremiah McCarthy
• [Elecraft] K2 Noise Blanker Modifications   Ralph McClintock
• [Elecraft] FD Results   Robert McGwier
• [Elecraft] Re: Is there a K3 coming - Not at this time.   Robert McGwier
• [Elecraft] K2- Sometimes no audio after switch on   McNamara, Philip
• [Elecraft] KPA100 T/R Switching Failure   Don Melcher
• [Elecraft] Rediculous, unreasonable and selfish firmware feature request   Don Melcher
• [Elecraft] KPA100 T/R Switching Failure   Don Melcher
• [Elecraft] Intermittent no RX on 80/160 K2/100 #4029   Don Melcher
• [Elecraft] troubles with kits   Don Melcher
• [Elecraft] Low voltage on AGC threshold   Mike, W8ENG
• [Elecraft] Low voltage on AGC threshold   Mike, W8ENG
• [Elecraft] Low voltage on AGC threshold   Mike, W8ENG
• [Elecraft] Low voltage on AGC threshold   Mike, W8ENG
• [Elecraft] troubles with kits   Mike, W8ENG
• [Elecraft] Re: K2 AGC Threshold.   Mike, W8ENG
• [Elecraft] K2: Control Board Strangeness; Low AGC threshold   Mike, W8ENG
• [Elecraft] Mail Folders   Mike,W8KRR
• [Elecraft] Mail Folders   Mike,W8KRR
• [Elecraft] Weller Solder Station   Bob Miller
• [Elecraft] Legendary Customer Service   Mychael Morohovich
• [Elecraft] KAT 100-1 vs KAT 100-2   Mychael Morohovich
• [Elecraft] KNB2 - odd behavior   Mychael Morohovich
• [Elecraft] Muting the K2   Mychael Morohovich
• [Elecraft] troubles with kits   Mychael Morohovich
• [Elecraft] LC Meter   Mychael Morohovich
• [Elecraft] KPA 100 for sale   Dane Morris
• [Elecraft] Built K-2 for sale   Dane Morris
• [Elecraft] K-2 Sold   Dane Morris
• [Elecraft] K1 Problem   Mike Morrow
• [Elecraft] KFL1-4 Problem   Mike Morrow
• [Elecraft] CW - SS - Off Topic   Mike Morrow
• [Elecraft] troubles with kits   Mike Morrow
• [Elecraft] Happy - belated USMC 229th   Brian Murrey
• [Elecraft] 3rd K2 and BPL   Brian Mury
• [Elecraft] RTTY BFO settings?   Brian Mury
• [Elecraft] K2/100 rtty & microphones questions   Brian Mury
• [Elecraft] RTTY on K2   Brian Mury
• [Elecraft] Sequential numbering keyer   Brian Mury
• [Elecraft] SSB low output   Brian Mury
• [Elecraft] SSB low output   Brian Mury
• [Elecraft] SSB low output   Brian Mury
• [Elecraft] SSB low output   Brian Mury
• [Elecraft] SSB low output   Brian Mury
• [Elecraft] SSB low output   Brian Mury
• [Elecraft] MD2 Heil Desk Microphone for the K2   Brian Mury
• [Elecraft] SSB low output   Brian Mury
• [Elecraft] SSB low output   Brian Mury
• [Elecraft] For Dale, WA8SRA   Brian Mury
• [Elecraft] Mic preamp question   Brian Mury
• [Elecraft] ProSet-K2 and big heads   Brian Mury
• [Elecraft] ProSet-K2 and big heads   Brian Mury
• [Elecraft] Linux (was: Problem with gmfsk)   Brian Mury
• [Elecraft] Internal keyer   Brian Mury
• [Elecraft] Posting   Brian Mury
• [Elecraft] Which mic   Brian Mury
• [Elecraft] Posting   Brian Mury
• [Elecraft] K2 - Strange problem ?   Brian Mury
• [Elecraft] HI Current   David N.
• [Elecraft] K160RX (Long)   David N.
• [Elecraft] RE: Elecraft CW Net Report for November 21-22   David N.
• [Elecraft] RE: Elecraft CW Net Report for November 29, 2004   David N.
• [Elecraft] FS KX1 SN 194   Rod N0RC
• [Elecraft] Telegraphy History/Trivial   Rod N0RC
• [Elecraft] Hum Coupling   N2EY at aol.com
• [Elecraft] CW - SS - Off Topic   N2EY at aol.com
• [Elecraft] CW - SS - Off Topic   N2EY at aol.com
• [Elecraft] Which mic   Michael Bower N4NMR
• [Elecraft] Internal and External Keying   KEN N4SO
• [Elecraft] NCH Tone Generator   KEN N4SO
• [Elecraft] K1 Power Switch   KEN N4SO
• [Elecraft] Problems with K2 #4502 ??   Fred Bennett N9TA
• [Elecraft] I'm havin' a BALL !!!   Fred Bennett N9TA
• [Elecraft] Shortwave Reveiver kit ???   Fred Bennett N9TA
• [Elecraft] That should be "Shortwave Receiver Kit" HIHIHi   Fred Bennett N9TA
• [Elecraft] Re: K2 @ SU9   Bill NY9H
• [Elecraft] New Tech Notes Article - SP2 Speaker for the K2   Bill NY9H
• [Elecraft] Bad CW   Nanko
• [Elecraft] Key clicks.   Nanko
• [Elecraft] Key clicks   Nanko
• [Elecraft] N0SS's CW Tuning Indcator   Jack Nelson
• [Elecraft] N2CQ QRP Contest Calendar - Nov 4-30, 2004   Ken Newman
• [Elecraft] N2CQ QRP Contest Calendar -   Ken Newman
• [Elecraft] N2CQ QRP Contest Calendar - Nov 18, Dec 30, 2004   Ken Newman
• [Elecraft] time adjustment   Bob Nielsen
• [Elecraft] LCD and LCD blacklight installation   Bob Nielsen
• [Elecraft] RTTY on K2   Bob Nielsen
• [Elecraft] EC-1.5...is there a half height EC-2 on the horizon?   Bob Nielsen
• [Elecraft] Soldering stations.   Bob Nielsen
• [Elecraft] KDSP2's Primary Menu - K2 s/n 549   Bob Nielsen
• [Elecraft] KX-1/MP-1 SWR limits   Bob Nielsen
• [Elecraft] CQWW DX CW Contest This Weekend - QRP Fun   Bob Nielsen
• [Elecraft] Ear buds fo rthe KX-1   Bob Nielsen
• [Elecraft] Linux (was: Problem with gmfsk)   Bob Nielsen
• [Elecraft] Dead Band Quiz   Bob Nielsen
• [Elecraft] C W question/Cut numbers   Bob Nielsen
• [Elecraft] soldering iron story   Nigel
• [Elecraft] Excellent exchange rate (or article?) helping Elecraft sales to Europe?   Frank Nikolajsen
• [Elecraft] Internal AAA batteries for KX1?   Tim O'Rourke
• [Elecraft] loss of side tone   Tim O'Rourke
• [Elecraft] loss of side tone   Tim O'Rourke
• [Elecraft] K2 PLL Range   Jessie Oberreuter
• FW: [Elecraft] How to set up SSB   Jessie Oberreuter
• [Elecraft] Highest power supply voltage for K2?   Jessie Oberreuter
• [Elecraft] CQWW   Tony Osman
• [Elecraft] K2 and FM   John Payne
• [Elecraft] Possible REALLY GOOD BUY on T/C Soldering Stn   John Payne
• [Elecraft] Increased Elecraft orders from Europe   Peter
• [Elecraft] Lost display button function   Peter
• [Elecraft] Jumping power on 40 and 80 meter   Peter
• [Elecraft] K2 - Strange Problem ?   Andy Pevy
• [Elecraft] Excellent exchange rate (or article?) helping Elecraft sales to Europe?   Philippe
• [Elecraft] k2 #4515 on air !   Philippe
• [Elecraft] Linux (was: Problem with gmfsk)   Philippe
• [Elecraft] Happy Veterans Day   Larry Phipps
• [Elecraft] Circuit Simulation Software   Larry Phipps
• [Elecraft] Proper Use of the Preamp   Steven Pituch
• [Elecraft] Proper Use of the Preamp   Steven Pituch
• [Elecraft] KIO2 outside of K2   Steven Pituch
• [Elecraft] KIO2 outside of K2   Steven Pituch
• [Elecraft] Kenwood MC-43S microphone   Steven Pituch
• [Elecraft] KPA100 and ROM chips   Steven Pituch
• [Elecraft] K2 - Filters adjustement   Steven Pituch
• [Elecraft] 6th Annual QRP Contest Calendar for 2005   Ron Polityka
• [Elecraft] 6th Annual QRP Contest Calendar for 2005   Ron Polityka
• [Elecraft] Saturday Appalachian Trail in PA   Ron Polityka
• [Elecraft] KX1 Excessive Power Out   John Porter
• [Elecraft] Re: Rediculous, unreasonable and selfish firmware feature request..   David Pratt
• [Elecraft] Elecraft XV50 Transverter on 4mtrs/70Mhz - UK/EuropeQuestion?   David Pratt
• [Elecraft] Excellent exchange rate (or article?) helping Elecraft sales to Europe?   David Pratt
• [Elecraft] Elecraft rigs in Hungary?   David Pratt
• [Elecraft] Stupid C W question   David Pratt
• [Elecraft] Both internal and external keyer   QSKguy at aol.com
• [Elecraft] Both internal and external keyer   QSKguy at aol.com
• [Elecraft] Sequential Keyers   RM
• [Elecraft] Muting the K2   RMarch
• [Elecraft] S-Bar problem with K2DSP   Samuel Ramac
• [Elecraft] WAS in SweepStakes in 6 Hrs (Almost)   Daniel Reynolds
• [Elecraft] Re: [QRP-L] CV-130 Headphones   Daniel Reynolds
• [Elecraft] Re: Elecraft Digest, Vol 7, Issue 4   Cortland Richmond
• Subject: [Elecraft] KX-1/MP-1 SWR limits   Cortland Richmond
• Subject: [Elecraft] KX-1/MP-1 SWR limits   Cortland Richmond
• e: [Elecraft] Elecraft rigs in Hungary?   Cortland Richmond
• [Elecraft] Re: LC Meter   Cortland Richmond
• [Elecraft] Internal keyer   Earl Ritchie
• [Elecraft] k1 completed with SSB   Robert
• [Elecraft] Ear buds fo rthe KX-1   Robert
• [Elecraft] Semiconductor Analyzer...   RobertH134 at aol.com
• [Elecraft] Hum Coupling   Fraser Robertson
• [Elecraft] Re: Rediculous [sic], unreasonable and selfish firmwarefeature request..   Fraser Robertson
• [Elecraft] ECN errata   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft CW Net Cancellation   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft Net Report for November 14, 2004   Kevin Rock
• [Elecraft] Elecraft CW Net Report for November 15, 2004   Kevin Rock
• [Elecraft] K2 and 40 meters   Kevin Rock
• [Elecraft] Elecraft CW Net Announcement   Kevin Rock
• [Elecraft] Elecraft CW Net Report for November 21-22   Kevin Rock
• [Elecraft] Elecraft rigs in Hungary?   Kevin Rock
• [Elecraft] Elecraft Net Announcement   Kevin Rock
• [Elecraft] Elecraft CW Net Report for November 29, 2004   Kevin Rock
• [Elecraft] Digipan 2.0 question   James T. "Jim" Rogers
• [Elecraft] K2/100 and PSK31   James T. "Jim" Rogers
• [Elecraft] Hum Coupling   Stuart Rohre
• [Elecraft] Picked up this partially built K2   Roland
• [Elecraft] Thanks everybody   Roland
• [Elecraft] k1 completed with SSB   W5RCM - Ron
• [Elecraft] temp controlled soldering equip.   W5RCM - Ron
• [Elecraft] Hum Coupling   Vic Rosenthal
• [Elecraft] KNB2 - odd behavior   Vic Rosenthal
• [Elecraft] Re: Rediculous [sic], unreasonable and selfish firmware feature request..   Vic Rosenthal
• [Elecraft] CW - SS - Off Topic   Vic Rosenthal
• [Elecraft] External linear amplifier with CW   Vic Rosenthal
• [Elecraft] External linear amplifier with CW   Vic Rosenthal
• [Elecraft] K2 feature request   Vic Rosenthal
• [Elecraft] troubles with kits   Vic Rosenthal
• [Elecraft] SSB low output   Vic Rosenthal
• FW: [Elecraft] Both internal and external keyer   Vic Rosenthal
• [Elecraft] KX-1/MP-1 SWR limits   Vic Rosenthal
• [Elecraft] New Tech Notes Article - SP2 Speaker for the K2   Vic Rosenthal
• [Elecraft] Internal keyer   Vic Rosenthal
• [Elecraft] K2 - Strange Problem ?   Vic Rosenthal
• [Elecraft] Built K2 and unbuilt KPA100 For Sale   Michael Ross
• [Elecraft] Built K2 and unbuilt KPA100 For Sale   Michael Ross
• [Elecraft] Circuit Simulation Software   Tom Russo
• [Elecraft] Mail Folders   Paul Ryan
• [Elecraft] KIO2 connection with computer   Mike S
• [Elecraft] K2 #4472 new builder question on 4 mhz alighment   Mike S
• [Elecraft] Possible REALLY GOOD BUY on T/C Soldering Stn ANDDE-Soldering   Mike S
• [Elecraft] Possible REALLY GOOD BUY on T/C Soldering Stn   Mike S
• [Elecraft] 34472 another KAT2 question   Mike S
• [Elecraft] ATU P6/J7 alignment   Mike S
• [Elecraft] Auto-detect disable with internal keyer   Mike S
• [Elecraft] K2 - Strange Problem ?   Mike S
• [Elecraft] Saving the best for last- 2004 Hamfests!   Lisa Jones - Elecraft Sales
• [Elecraft] KPA100 and ROM chips   Paul Saville
• [Elecraft] Question on KAT2   Paul Saville
• [Elecraft] ProSet-K2 and big heads   Paul Saville
• [Elecraft] KPA-100 spur on 160M?   Paul Saville
• [Elecraft] Spectrogram help   Dan Schieler
• [Elecraft] Good noise free power supply?   Dan Schieler
• [Elecraft] KPA100 remote w/o KAT100?   Dan Schieler
• [Elecraft] K160 effect on 80/75m power   Dan Schieler
• [Elecraft] KDSP2's Primary Menu - K2 s/n 549   Bill Scurlock
• [Elecraft] Followup - KDSP2's Primary Menu - K2 s/n 549   Bill Scurlock
• [Elecraft] re:K2 - Strange problem   Dave Sergeant
• [Elecraft] KSB-2 Arrived today   Jim Sheldon
• [Elecraft] Re: Is there a K3 coming - Not at this time.   Johnny Siu
• [Elecraft] Re: Time Change   Gil Stacy
• [Elecraft] Internal AAA batteries for KX1?   Steve
• [Elecraft] Signal Generator   Steve Harpole, DDS.
• [Elecraft] Problem with gmfsk   R. Kevin Stover
• [Elecraft] Linux   R. Kevin Stover
• [Elecraft] PICs re-writable?   Michael Studer
• [Elecraft] New version 2.0 Marote K2 Linux control program released   Michael Studer
• [Elecraft] Linux   Marteinn Sverrisson
• [Elecraft] 04 SS Phone / K2   TJM
• [Elecraft] K2 - SN4511 Diffuser Question   Malcolm Taylor
• [Elecraft] Distortion on 80m   Malcolm Taylor
• [Elecraft] Distortion on 80m solved   Malcolm Taylor
• [Elecraft] K2 Deaf 20/30 metre band - the cure in my case   Malcolm Taylor
• [Elecraft] Rediculous, unreasonable and selfish firmware feature request..   Bob Tellefsen
• [Elecraft] External linear amplifier with CW   Bob Tellefsen
• [Elecraft] Talking filter Bandwidths   Bob Tellefsen
• [Elecraft] Circuit Simulation Software   Bob Tellefsen
• [Elecraft] troubles with kits   Bob Tellefsen
• [Elecraft] K2 S meter   Bob Tellefsen
• [Elecraft] LC Meter   Bob Tellefsen
• [Elecraft] Possible REALLY GOOD BUY on T/C Soldering Stn ANDDE-Soldering   Bill Tippett
• [Elecraft] Possible REALLY GOOD BUY on T/C Soldering Stn   Bill Tippett
• [Elecraft] Elecraft PC Board Scans - Today's Additions   David Toepfer
• [Elecraft] C W question/Cut numbers   David Toepfer
• [Elecraft] Re: Lightning arrestors   Steve Uhrig
• [Elecraft] K6XX Visible CW Tuning Indicator   Unifiedtx at aol.com
• [Elecraft] KAT100 LEDs Gone Wild   Unifiedtx at aol.com
• [Elecraft] DSP on 60 Meters   Unifiedtx at aol.com
• [Elecraft] SSB Low Output   Unifiedtx at aol.com
• [Elecraft] KAT100 LED Configuratuin Jumpers   Unifiedtx at aol.com
• [Elecraft] LC Meter   Paul - VE1DY
• [Elecraft] Ear buds fo rthe KX-1   Paul - VE1DY
• [Elecraft] Ear buds fo rthe KX-1   Paul - VE1DY
• [Elecraft] K3   Gary Bartlett VE1RGB
• [Elecraft] KIO2 connection with computer   Pierre Vallee
• [Elecraft] Ham shop nr Washington DC   Nick Verbeek
• [Elecraft] Ham shop nr Washington DC   Nick Verbeek
• [Elecraft] K2 #04506 is alive and well   Ron W
• [Elecraft] Winter Fox Hunts   W0rw at aol.com
• [Elecraft] Peripatetic Morse at 0130Z/7040KHz   W0rw at aol.com
• [Elecraft] Peripatetic Morse Results   W0rw at aol.com
• [Elecraft] KX1 Mods   W0rw at aol.com
• [Elecraft] DX on 40M/KX1   W0rw at aol.com
• [Elecraft] Let me build a K2 for you.   Alan - W1HYV
• [Elecraft] Let me build you K2   Alan - W1HYV
• [Elecraft] Happy Veterans Day   W2BJ
• [Elecraft] K1 KNB1 Question   Larry Makoski W2LJ
• [Elecraft] OT - Happy Thanksgiving   Larry Makoski W2LJ
• [Elecraft] Newest Elecraft WAS award earned   Larry Makoski W2LJ
• [Elecraft] PICs re-writable?   Bob - W5BIG
• [Elecraft] Circuit Simulation Software   Bob - W5BIG
• [Elecraft] Possible REALLY GOOD BUY on T/C Soldering Stn AND DE-Soldering Stn   Bob - W5BIG
• [Elecraft] Hot air soldering tool   Bob - W5BIG
• [Elecraft] Spectrum analyzer (OT)   Bob - W5BIG
• [Elecraft] Highest power supply voltage for K2?   Bob - W5BIG
• [Elecraft] Ham shop nr Washington DC   Art - W6KY
• [Elecraft] The Brits and DDT   Art - W6KY
• [Elecraft] QRP'ers - Work WAS This Weekend   Art - W6KY
• [Elecraft] WAS in SweepStakes in 6 Hrs (Almost)   Art - W6KY
• [Elecraft] CQWW DX CW Contest This Weekend - QRP Fun   Art - W6KY
• [Elecraft] CQ WW CW This Weekend - QRP Heaven!   Art - W6KY
• [Elecraft] Dead Band Quiz   Art - W6KY
• [Elecraft] Dead Band Quiz   Art - W6KY
• [Elecraft] Dead Band Quiz - Winners - End of Thread   Art - W6KY
• [Elecraft] Fw: FS K2#2571   Brent Sutphin WB4X
• [Elecraft] CQ WW CW This Weekend - QRP Heaven!   WJuergens at t-online.de
• [Elecraft] Hum Coupling   A Walker
• [Elecraft] Hum Coupling   A Walker
• [Elecraft] Some Questions re Constructing KPA100   Mike Walkington
• [Elecraft] VCO Relationship with 4 MHz Oscillator   Mike Walkington
• [Elecraft] Re: K2 BFO Test: BFO low freq is really low   Allen Ward
• [Elecraft] Re. Trouble with KDSP2, need help.   Allen Ward
• [Elecraft] Internal AAA batteries for KX1?   Eric Ward
• [Elecraft] Elecraft rigs in Hungary?   Tony Wells
• [Elecraft] Elecraft rigs in Hungary?   Tony Wells
• [Elecraft] Elecraft rigs in Hungary?   Tony Wells
• [Elecraft] Elecraft rigs in Hungary?   Tony Wells
• [Elecraft] The Brits and DDT   Douglas Westover
• [Elecraft] Low voltage on AGC threshold   Douglas Westover
• [Elecraft] LC Meter   Phil Wheeler
• [Elecraft] Posting   Phil Wheeler
• [Elecraft] Companion External Speaker for the K2   Dave White
• [Elecraft] External Speaker for the K2 Update   Dave White
• [Elecraft] Re: Time Change   Jim Wiley
• [Elecraft] Hum Coupling   Jim Wiley
• [Elecraft] Signal Generator   W3FPR - Don Wilhelm
• [Elecraft] Tuning indicator problem   W3FPR - Don Wilhelm
• [Elecraft] K2 S/N 4226 60m VCO value   W3FPR - Don Wilhelm
• [Elecraft] Spectrogram help   W3FPR - Don Wilhelm
• [Elecraft] Audio mod for split operation   W3FPR - Don Wilhelm
• [Elecraft] RTTY BFO settings?   W3FPR - Don Wilhelm
• [Elecraft] Key clicks   W3FPR - Don Wilhelm
• [Elecraft] RTTY BFO settings?   W3FPR - Don Wilhelm
• [Elecraft] Problems with K2 #4502 ??   W3FPR - Don Wilhelm
• [Elecraft] K2- Is the Power display really representative of PEP?   W3FPR - Don Wilhelm
• [Elecraft] K2 Requested vs. Indicated Power Output   W3FPR - Don Wilhelm
• [Elecraft] K2 Control Board Resistance Checks   W3FPR - Don Wilhelm
• [Elecraft] K2: No recieve/power out on 20M thru 10M   W3FPR - Don Wilhelm
• [Elecraft] K2 PLL Range   W3FPR - Don Wilhelm
• [Elecraft] K2: No recieve/power out on 20M thru 10M   W3FPR - Don Wilhelm
• [Elecraft] K2 #4472 new builder question on 4 mhz alighment   W3FPR - Don Wilhelm
• [Elecraft] Re: Is there a K3 coming - Not at this time.   W3FPR - Don Wilhelm
• [Elecraft] How to set up SSB   W3FPR - Don Wilhelm
• [Elecraft] How to set up SSB   W3FPR - Don Wilhelm
• [Elecraft] It works again :-)   W3FPR - Don Wilhelm
• [Elecraft] Talking filter Bandwidths   W3FPR - Don Wilhelm
• [Elecraft] K2 Control Board   W3FPR - Don Wilhelm
• [Elecraft] All working :-)   W3FPR - Don Wilhelm
• [Elecraft] Parallel line lightning arrestors   W3FPR - Don Wilhelm
• [Elecraft] Parallel line lightning arrestors   W3FPR - Don Wilhelm
• [Elecraft] K2 BFO Test: BFO low freq is really low   W3FPR - Don Wilhelm
• [Elecraft] Some Questions re Constructing KPA100   W3FPR - Don Wilhelm
• [Elecraft] Low voltage on AGC threshold   W3FPR - Don Wilhelm
• [Elecraft] temp controlled soldering equip.   W3FPR - Don Wilhelm
• [Elecraft] KIO2 outside of K2   W3FPR - Don Wilhelm
• [Elecraft] Alignment and Test, Part II   W3FPR - Don Wilhelm
• [Elecraft] Re: Alignment and Test, Part II   W3FPR - Don Wilhelm
• [Elecraft] Minimum clearance on KPA-100 heatsink?   W3FPR - Don Wilhelm
• Re[Elecraft]K160RX problem   W3FPR - Don Wilhelm
• [Elecraft] KPA100 C83   W3FPR - Don Wilhelm
• [Elecraft] K2/100 and PSK31   W3FPR - Don Wilhelm
• [Elecraft] K2 super kit, but new problem !   W3FPR - Don Wilhelm
• [Elecraft] troubles with kits   W3FPR - Don Wilhelm
• [Elecraft] OT: troubles with kits - my comments   W3FPR - Don Wilhelm
• [Elecraft] K2 and FM   W3FPR - Don Wilhelm
• [Elecraft] K2 S meter   W3FPR - Don Wilhelm
• [Elecraft] KPA100 Shields   W3FPR - Don Wilhelm
• [Elecraft] KAT100 LEDs Gone Wild   W3FPR - Don Wilhelm
• [Elecraft] KPA100 Shields   W3FPR - Don Wilhelm
• [Elecraft] KPA100 and ROM chips   W3FPR - Don Wilhelm
• [Elecraft] K160RX (Long)   W3FPR - Don Wilhelm
• [Elecraft] SSB low output   W3FPR - Don Wilhelm
• [Elecraft] 4MHz Oscillator Calibration   W3FPR - Don Wilhelm
• [Elecraft] K160 effect on 80/75m power   W3FPR - Don Wilhelm
• [Elecraft] How to set up SSB   W3FPR - Don Wilhelm
• [Elecraft] KX-1/MP-1 SWR limits   W3FPR - Don Wilhelm
• [Elecraft] Improved VOX sensitivity mod   W3FPR - Don Wilhelm
• [Elecraft] MD2 resistor mod - a different approach?   W3FPR - Don Wilhelm
• [Elecraft] Need advice on Heil mic   W3FPR - Don Wilhelm
• [Elecraft] MD2 resistor mod - a different approach?   W3FPR - Don Wilhelm
• [Elecraft] MD2 resistor mod - a different approach?   W3FPR - Don Wilhelm
• [Elecraft] 34472 another KAT2 question   W3FPR - Don Wilhelm
• [Elecraft] ATU P6/J7 alignment   W3FPR - Don Wilhelm
• [Elecraft] Update - K1 / KFL1-4 / Question   W3FPR - Don Wilhelm
• [Elecraft] Picked up this partially built K2   W3FPR - Don Wilhelm
• [Elecraft] #4472 transmitter setup problem.   W3FPR - Don Wilhelm
• [Elecraft] Picked up this partially built K2   W3FPR - Don Wilhelm
• [Elecraft] VCO Relationship with 4 MHz Oscillator   W3FPR - Don Wilhelm
• [Elecraft] MH2 to MD2 - K2, Modification Required?   W3FPR - Don Wilhelm
• [Elecraft] Posting   W3FPR - Don Wilhelm
• [Elecraft] K2 - Strange problem ?   W3FPR - Don Wilhelm
• [Elecraft] Newbie   W3FPR - Don Wilhelm
• [Elecraft] MD2   W3FPR - Don Wilhelm
• [Elecraft] Highest power supply voltage for K2?   W3FPR - Don Wilhelm
• [Elecraft] no audio after switch on   W3FPR - Don Wilhelm
• [Elecraft] Possible REALLY GOOD BUY on T/C Soldering Stn ANDDE-Soldering Stn   Walter Wilson
• [Elecraft] FS: K2/100 plus   David J Windisch
• [Elecraft] Peripatetic Morse Results   Sander Wissing
• [Elecraft] Elecraft XV50 Transverter on 4mtrs/70Mhz - UK/EuropeQuestion?   Sander Wissing
• [Elecraft] KFL1-4 trimmer pots   Gene Worth
• [Elecraft] KPA100 Voltage Measurement Discrepancy Question   Brian Wruble
• [Elecraft] KPA100 C83   Brian Wruble
• FW: [Elecraft] KX-1 pouch   Brian F. Wruble
• [Elecraft] Trouble with KDSP2, need help   Marcus Busch [DL1EKC]
• [Elecraft] Trouble with KDSP2, need help -> solved   Marcus Busch [DL1EKC]
• [Elecraft] 3rd K2 and BPL   Joe - aa4nn
• [Elecraft] External linear amplifier with CW   Joe - aa4nn
• [Elecraft] External linear amplifier with CW   Joe - aa4nn
• [Elecraft] K2 Control Board   Joe - aa4nn
• [Elecraft] Shortwave Reveiver kit ???   Joe - aa4nn
• [Elecraft] Re:WTCPT Weller Soldering Stations   alanchilds at prodigy.net
• [Elecraft] Re:Troubles with kits - reply to Herb   alanchilds at prodigy.net
• [Elecraft] Re: Putting the K2 in K2ZR/FD; 3rd in 1A-b   wayne burdick
• [Elecraft] Re: Problems with K2 #4502 ??   wayne burdick
• [Elecraft] Re: Power lag after changing bands...   wayne burdick
• [Elecraft] Re: Rediculous, unreasonable and selfish firmware feature request..   wayne burdick
• [Elecraft] Elecraft kits make great gifts...updated buying guide now available   wayne burdick
• [Elecraft] KX1 SWR limits: general discussion [+ bonus LED Logbook lamp tip]   wayne burdick
• [Elecraft] Re: KFL1-4 trimmer pots   wayne burdick
• [Elecraft] Re: KX1 & Wind River Mountains   wayne burdick
• [Elecraft] Re: Stupid C W question   wayne burdick
• [Elecraft] Re: purchase decision [K2/100 as ARES/ermergency rig]   wayne burdick
• [Elecraft] Re: Getting more KX1 sidetone levels by using tristate   wayne burdick
• [Elecraft] Happy - belated USMC 229th   crmabbott at comcast.net
• [Elecraft] KAT 100-1 vs KAT 100-2   jim danehy
• [Elecraft] learning CW   jim danehy
• [Elecraft] Need advice on Heil mic   jim danehy
• [Elecraft] Posting   jim danehy
• [Elecraft] 73   jim danehy
• [Elecraft] k2 #4515 on air !   f6crp
• [Elecraft] RE: Weller station repair (warranty)   gregory.beat at comcast.net
• [Elecraft] LCD and LCD blacklight installation   gsurrency at juno.com
• [Elecraft] RTTY on K2   rolf heidenborg
• [Elecraft] troubles with kits   herbbonniewinn at racc2000.com
• [Elecraft] Comparing HexKey CW Paddle   jeff_list at burnshome.org
• [Elecraft] Cost Effective Balun   jeff_list at burnshome.org
• [Elecraft] FS: Ten-Tec 705 Microphone   jeff_list at burnshome.org
• [Elecraft] In ear monitors   jeff_list at burnshome.org
• [Elecraft] RE: 4472 receiver problem found   jerry
• [Elecraft] K2 #4472 new builder question on 4 mhz alighment   jerry
• [Elecraft] Re: K2 #4472 4 mhz alighment resolved   jerry
• [Elecraft] Re: K2 #4472 4 mhz alighment resolved   jerry
• [Elecraft] : Re: K2 #4472 4 mhz alighment resolved   jerry
• [Elecraft] Question on KAT2   jerry
• [Elecraft] 34472 another KAT2 question   jerry
• [Elecraft] #4472 transmitter setup problem.   jerry
• [Elecraft] #4472 transmitter setup problem.   jerry
• [Elecraft] #4472 transmitter setup problem.   jerry
• [Elecraft] K2 2597   john.brewer at us.schneider-electric.com
• [Elecraft] Elecraft rigs in Hungary?   joswarnier
• [Elecraft] Is there a K3 coming   js
• [Elecraft] K2 #4520 up and running...   k4zm
• [Elecraft] 4MHz Oscillator Calibration   k4zm
• [Elecraft] K2 #4039 Headphone Socket - Replacement needed, UK supplier?   k4zm
• [Elecraft] KS PLL Reference Oscillator   k4zm
• [Elecraft] Re: [QRP-L] Happy Veterans Day   k6xr
• [Elecraft] micro 908 kit for sale or trade   k6xr
• [Elecraft] F.S. micro908 analizer kit   k6xr
• [Elecraft] micro908   k6xr
• [Elecraft] Com test   k7hbg at dslextreme.com
• [Elecraft] Control card problem.   k7hbg at dslextreme.com
• [Elecraft] Question on KAT2   bill linn
• [Elecraft] Re: Cost Effective Balun   n2cx
• [Elecraft] K2 #4039 Headphone Socket - Replacement needed, UK supplier?   nicolas
• [Elecraft] 3rd K2 and BPL   nz7c at cox.net
• [Elecraft] Build 100W amp & tuner 1st - issues?   nz7c at cox.net
• [Elecraft] Build 100W amp & tuner 1st - issues?   nz7c at cox.net
• [Elecraft] Kenwood MC-43S microphone   rattray
• [Elecraft] Elecraft DX Contest Group?   rattray
• [Elecraft] wobbly knob   redmen1969 at optonline.net
• [Elecraft] more power scotty   redmen1969 at optonline.net
• [Elecraft] Re: Time Change   redmen1969 at optonline.net
• [Elecraft] Re: Time Change   redmen1969 at optonline.net
• [Elecraft] Dead Band Quiz   redmen1969 at optonline.net
• [Elecraft] K2 and FM   seumasd
• [Elecraft] purchase decision   swhitney
• [Elecraft] Problem with gmfsk   w2bvh
• [Elecraft] Re: [NJQRP] Problem with gmfsk   w2bvh
• [Elecraft] Photo Bag @ Wal Mart   w7kxb at comcast.net
• [Elecraft] C W question/Cut numbers   w7kxb at comcast.net
• [Elecraft] MD2   w7kxb at comcast.net

Last message date: Tue Nov 30 20:23:30 EST 2004
Archived on: Tue Nov 30 20:39:01 EST 2004

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...