[Elecraft] EC-1.5...is there a half height EC-2 on the horizon?

[Don Brown]

Hi

Sorry but after measuring on my K2/100 and one of my transverters that are in the same case as the KAT100-1 It appears the KPA100 is too big to fit into an EC-1.5. It looks like the only option is to mount the KPA100 into the EC-2 even if Elecraft made the EC-1.5 available. 

Don Brown


  ----- Original Message ----- 
  From: Tom Althoff<mailto:althoff at verizon.net> 
  To: elecraft at mailman.qth.net<mailto:elecraft at mailman.qth.net> 
  Sent: Tuesday, November 09, 2004 7:25 AM
  Subject: [Elecraft] EC-1.5...is there a half height EC-2 on the horizon?


  There's been mention in the archives of a so-called "EC-1.5" possibly being
  made available.   I'm mainly interested in the KPA-100 to drive my KW but
  don't want to keep swapping covers or have to buy the KAT100-2 just to drive
  the amp input.   The smaller cabinet would still allow me to mount just the
  KPA-100 and set it on top of the K2 for fixed use and just unplug it and
  take out the K2 for portable.

  Is such a cabinet in the works?

  73 de Tom K2TA

  _______________________________________________
  Elecraft mailing list
  Post to: Elecraft at mailman.qth.net<mailto:Elecraft at mailman.qth.net>
  You must be a subscriber to post to the list.
  Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft<http://mailman.qth.net/mailman/listinfo/elecraft>    
  Help: http://mailman.qth.net/subscribers.htm<http://mailman.qth.net/subscribershtm>
  Elecraft web page: http://www.elecraft.com<http://www.elecraft.com/>