[Elecraft] EC-1.5...is there a half height EC-2 on the horizon?

[Tom Althoff]

Thanks for the info.   I guess it's swap-em-back-n-forth until the XYL approves the $280 for the KAT100-2 and EC-2.   I'll start dropping hints for a February birthday purchase.

Tom K2TA
  ----- Original Message ----- 
  From: Don Brown 
  To: elecraft at mailman.qth.net ; Tom Althoff 
  Sent: Tuesday, November 09, 2004 10:20 AM
  Subject: Re: [Elecraft] EC-1.5...is there a half height EC-2 on the horizon?


  Hi

  Sorry but after measuring on my K2/100 and one of my transverters that are in the same case as the KAT100-1 It appears the KPA100 is too big to fit into an EC-1.5. It looks like the only option is to mount the KPA100 into the EC-2 even if Elecraft made the EC-1.5 available. 

  Don Brown


    ----- Original Message ----- 
    From: Tom Althoff 
    To: elecraft at mailman.qth.net 
    Sent: Tuesday, November 09, 2004 7:25 AM
    Subject: [Elecraft] EC-1.5...is there a half height EC-2 on the horizon?


    There's been mention in the archives of a so-called "EC-1.5" possibly being
    made available.   I'm mainly interested in the KPA-100 to drive my KW but
    don't want to keep swapping covers or have to buy the KAT100-2 just to drive
    the amp input.   The smaller cabinet would still allow me to mount just the
    KPA-100 and set it on top of the K2 for fixed use and just unplug it and
    take out the K2 for portable.

    Is such a cabinet in the works?

    73 de Tom K2TA

    _______________________________________________
    Elecraft mailing list
    Post to: Elecraft at mailman.qth.net
    You must be a subscriber to post to the list.
    Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft    
    Help: http://mailman.qth.net/subscribers.htm
    Elecraft web page: http://www.elecraft.com