[Elecraft] Update - K1 / KFL1-4 / Question

[W3FPR - Don Wilhelm]

Dwight,

Since both crystals are not oscillating, I would wenture a guess that you 
have an oscillator that refuses to oscillate above 22 MHz or so.  Take a 
good look at the capacitor values in the oscillator circuit (use the 
schematic to identify which components are associated with the oscillator).

73,
Don W3FPR

----- Original Message ----- 

>
> Dug out my 100 mhz scope, yes I should have got it out sooner! The 29 mhz
> crystal is dead. So I checked the relays, they check good in b4 setting.
> Changed the 15 m crystal to the 17 m crystal (26.05 mhz) it is also flat
> lined. All have the app 6 vdc on them.
>
> The 15, 18 and 22 mhz crystals are fine.
>
>