Re[Elecraft]K160RX problem

[W3FPR - Don Wilhelm]

Bryan,

This is a residual step left over from the old days when CAL PLL was to be 
performed on all bands - it is no longer required, CAL PLL is only done with 
the K2 set to 40 meters - and as you experienced it will report an error if 
you attempt it on 160.

Simply skip that step in the K160RX instructions and all will be well.

73,
Don W3FPR

----- Original Message ----- 

Tryng to do 160 Meter Alignment page 9.  CALL PLL display shows 06917.1 and 
then Info 232.

Any ideas will be appreciated.