[Elecraft] KPA-100 fan air flow

[Tom Althoff]

Thanks Ron -

A couple of people mentioned this so I took an insulated alignment tool and
poked between the fins and sure enough...this is where 90% of the hot air
escapes.  (the other 10% enters through the microphone and exits through the
SO-239!).

73 de Tom K2TA

----- Original Message ----- 
From: "Ron D'Eau Claire" <rondec at easystreet.com>
To: "'Elecraft'" <elecraft at mailman.qth.net>
Sent: Wednesday, November 24, 2004 9:11 PM
Subject: RE: [Elecraft] KPA-100 fan air flow


If you look closely, you'll see that the ribs on the top leave spaces at the
end of the heat sink closest to the front of the K2 for air to flow through.


Ron AC7AC

-----Original Message-----

The fan in the KPA-100 seems to be designed to draw cool air into the
radio....where does it exit? _______________________________________________



_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com