[Elecraft] How to set up SSB

[W3FPR - Don Wilhelm]

Dan,

The 't' is on the BFO display corresponding to FL1 - and its only meaning is 
that this is the BFO (carrier) frequency that will be used for transmit.

73,
Don W3FPR

----- Original Message ----- 

> Well, you made me think, but it turns out, you are right. The CAL FIL
> display says "t" for the 2.20 setting, but it's really using OP1. However,
> with the alignment done on 2.20 and transmit done on OP1, the filter will 
> be
> very off, and the ripple is extreme.
>
> My 2 year old KSB2 seems OK in the flatness department.
>